Direct connections - Import export

In the field of safety sensors, we offer safety light screens in various lengths and types with up to 14 mm resolution and muting function. We offer laser scanners with large protective fields for special tasks. Two-hand buttons and controls round off the range. For direct connection to the machine, we also offer versatile controls in addition to simple safety relays.

igubal® flange bearing EFOM With 2 mounting holes igubal® flange bearing EFOM igubal® flange bearing EFSM With 4 mounting holes, dimensional series E igubal® flange bearing EFSM igubal® flange bearing KFSM-GT With 4 mounting holes, dimensional series K igubal® flange bearing KFSM-GT igubal® flange bearing EFOM HT Applicable up to 200°C,resistant to chemicals , with 2 mounting holes igubal® flange bearing EFOM HT igubal® flange bearing EFSM HT Applicable up to 200°C,resistant to chemicals , with 4 mounting holes igubal® flange bearing EFSM HT igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins - male threads for direct connections igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins, female thread igubal® flange bearing with ball pins, female threads for direct connections igubal® flange bearing with ball pins, female thread igubal® flange bearings were developed for the bearing of shaft extensions or shaft bushings. Like all igubal® products, they consist of an igumid G housing and an iglidur® W300 spherical ball. igubal® flange bearings correspond to the dimensional series E and are offered with 2 or 4 mounting holes. Features igubal® flange bearings were developed for the bearing of shaft ends or shaft bushings. Like all igubal® products, it consists of a housing made of igumid G and a spherical ball in iglidur® W300. igubal® flange bearings correspond to the dimensional series E and are offered with 2 or 4 mounting holes. Application area As the igubal® flange bearings are also suitable for dry operation, they are particularly considered for applications in which the installation site is difficult, in humid or wet environment, or with special demands on hygiene. Thus the igubal® flange bearings are used for instance in wash-brush controls, in facade sunscreen systems, in materials handling systems and in bakery equipment. igubal® flange bearing - Applications Installation According to type, igubal® flange bearing are designed for mounting with 2 or 4 holes. The 2-hole types are provided with oblong holes that enable a trouble-free readjustment. A precise alignment of the bearing housing is not required as the flange bearing automatically compensates for error. Delivery program For shafts, igubal® flange bearings with 2 and 4 mounting holes are available in standard dimensions of 5 to 50 mm. For delivery times and more dimensions, you may please contact us. When to use it? When chemical resistance is required When a low-cost alternative is desired When dirt-resistant bearings are needed When misalignments should be compensated When fully split components are needed When not to use? When temperatures above +200°C prevail When an integrated collar is required When dimensions over 50 mm are needed When rotation speeds in excess of 0.5 m/s should be implemented igubal® flange bearing EFOM With 2 mounting holes igubal® flange bearing EFOM igubal® flange bearing EFSM With 4 mounting holes, dimensional series E igubal® flange bearing EFSM igubal® flange bearing KFSM-GT With 4 mounting holes, dimensional series K igubal® flange bearing KFSM-GT igubal® flange bearing EFOM HT Applicable up to 200°C,resistant to chemicals , with 2 mounting holes igubal® flange bearing EFOM HT igubal® flange bearing EFSM HT Applicable up to 200°C,resistant to chemicals , with 4 mounting holes igubal® flange bearing EFSM HT igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins - male threads for direct connections igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins, female thread igubal® flange bearing with ball pins, female threads for direct connections igubal® flange bearing with ball pins, female thread

Several optional diffuser: general PC diffuser, flexible PC diffuser,black diffuser, aluminium blind diffuser 50mm large luminous surface, trimless recessed design,integratedinto architecture Leakage proof shield design, perfect details AL6063-T5 aluminum profile with high-quality surface treatment,black, white and silver are optional Multiple optional connectors:180° direct connection, L type, T type,X type

Several optional diffuser: general PC diffuser, flexible PC diffuser,black diffuser, aluminium blind diffuser 50mm large luminous surface, trimless recessed design,integrated into architecture Leakage proof shield design, perfect details AL6063-T5 aluminum profile with high-quality surface treatment,black, white and silver are optional Multiple optional connectors:180° direct connection, L type, T type,X type

With wide range of coupling value starting from 5dB to 40dB, bda connectivity directional couplers offer the highest network distribution flexibility. In addition, its low loss low PIM and high isolation combine with various connector configurations and power ratings allow network operators the best selection for network design. Operating frequency is extended to 3.8GHz in some series for future network upgrade.

Material: Brass permits direct connection of hoses on pressure joint/suction joint of the pump. Connection: 1/4 male BSP Explosion Protection: not explosion-proof Accessories group: Connections PURE version: without PURE version

Material: PP permits direct connection of hoses on pressure joint/suction joint of the pump. Connection: 1/4 male BSP Explosion Protection: not explosion-proof Accessories group: Connections PURE version: without PURE version

Material: PP permits direct connection of hoses on pressure joint/suction joint of the pump. Connection: 1 male BSP Explosion Protection: not explosion-proof Accessories group: Connections PURE version: without PURE version

Material: PP permits direct connection of hoses on pressure joint/suction joint of the pump. Connection: 1/2 male BSP Explosion Protection: not explosion-proof Accessories group: Connections PURE version: without PURE version

Material: PP Permits direct connection of hoses on pressure joint/suction joint of the pump. Connection: 3/8 male BSP Explosion Protection: not explosion-proof Accessories group: Connections PURE version: without PURE version

Material: PP permits direct connection of hoses on pressure joint/suction joint of the pump. Connection: 1/4 male BSP Explosion Protection: not explosion-proof Accessories group: Connections PURE version: without PURE version

Material: Brass Permits direct connection of hoses on pressure joint/suction joint of the pump. Connection: DN 1/2" (12) x 1/2 male BSP Explosion Protection: not explosion-proof Accessories group: Connections PURE version: without PURE version

Use: Multiple connectors for thermocouple and RTD circuits. Suitable for direct connection of up to 6 circuits simultaneously. Mechanical design: • Strong steel plate housing, coated with epoxy resin. • Anodised aluminium handle for easy disconnection of the plug connectors. • Available with contacts for 1 to 6 measurement circuits. • Corresponds with Standard Vertical Panel Type “PASV-(…)” and Sandard Multiple Jack Type “MJS-(…)”.

—>Highly flexible transfer element with high torsional elasticity —>High torsional vibration and shock load damping capability —>Compensation of misalignments and easy positioning of the drive and drive train possible —>Direct connection to flywheels according to specification Ready-to-install custom solution —>Diverse designs achievable with modular construction —>Compensation of axial, radial and angular displacements —>Radial (dis)assembly of the coupling element —>Maintenance-free —>Extended range of application due to Atex certification in accordance with Directive 2014/34/EU

Interactive multi-touch monitor for use in the classroom, meeting room, public facilities, retail, and wherever a large-format touch monitor is required. The Android-based displays are made of anti-glare tempered glass, are suitable for everyday use and have up to 20 touch points. The professional monitors from Philips are specially optimised for Android apps. Activate the built-in whiteboard mode to turn the display into a blank canvas that can be drawn on by multiple users by hand or with special markers. Displayed content can be captured for quick printing or file sharing. Alternatively, four different areas can be displayed on the screen. Up to 32 devices can be connected simultaneously in the existing WLAN network and switch between contents as required. A direct connection with a dongle is also possible as an option.

Raspberry Pi accessory kit for a UART to USB converter board Epoxy fibre-glass, FR4 1.50 mm Double-sided, 35 µm Cu Plated through holes (PTH) Hot-tinned (HAL lead free) Solder stop mask One 40-pole connector for Raspberry Pi 21 x 32 holes Ø 1,00 mm Hole matrix field with 2.54 mm grid and 13 x 28 solder pads Ø 2.20 mm Two potential strips Four pick-up holes, Ø 2.75 mm For direct connection and control of a Raspberry Pi by computer 85,00 x 56,00 mm

Aluminum dry sump oil tanks can be dismantled and cleaned. Rotatable halves allow the connections to be rotated in the desired direction. Return and vent connections on the top of the tank. From 4.5 liters to 11 liters capacity.

Equipped with X-Halt braking function for operational safety. Ergonomic and user-friendly with low vibrations, optimally balanced device, and no direct emissions. Thanks to integrated connectivity, you can easily monitor the location, runtime, and maintenance intervals of the device, and receive wireless updates via FOTA (Firmware over the Air). Powered by the Husqvarna PACE battery system with high performance and fast charging for impressive productivity.

Soft turn of the bundles Low maintenance Optimal access Very quiet operation Intrinsically safe machine, protection door-less concept Bypass without bundle turning, manually Upstream and downstream interlocks with complete plug connection In conveying direction left or either right Power cable, length 3m OPTIONAL: Bypass without bundle turning, automatically OPTIONAL: One pop-out roller on entry side OPTIONAL: Machine movable Table height steplessly adjustable Many specific options available, easily configurable

When using high-performance CO2 lasers for welding applications, metal mirrors are usually preferred for beam guidance. Depending on the desired application, the configuration of the machining head is composed of modular individual components according to customer requirements. The possibilities are almost unlimited, ranging from the simplest welding head to complex 3D machining heads. The FH40/C focusing heads are used for laser power up to 5 KW and raw beam diameters up to max. 30mm, the FH60 focusing head for laser power up to 15 KW and raw beam diameters up to max. 50mm. All optical units have connections for direct water cooling, are available with different coatings and are generally available from stock. In addition to the cross-jet for the efficient reduction of splashes and smell on the mirror optics, protective gas feeds with a lateral or coaxial flow direction are also offered for targeted coverage of the welding torch.

Our crane end carriages, which we have developed in various designs, offer flexibility and high operating reliability. These compact, modular rail-mounted travel units can be connected direct to crane girders and load-bearing structures. Our end carriages consist of a torsionally rigid box section and complete travel units with geared motors and wheels from the Demag modular system, which can be configured for all load capacity ranges. These combinations result in solutions to meet specific application requirements for safe crane and machinery travel motions that are kind to the rails.

Your reference product 5ST3615 is delivered from 3 days after the confirmation of your order. The exact delivery date will be indicated upon confirmation. Free delivery from 1,000 € of purchase. We deliver to France, Reunion, Belgium, Switzerland, Luxembourg, Canada, Haiti, Congo, Madagascar, Cameroon, Ivory Coast, Niger, Burkina Faso, Mali, Senegal, Rwanda, Guinea, Benin, Burundi, Gabon, Djibouti , Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal. How to buy To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging system or by email at contact@profelec.fr or by telephone from 8 a.m. to 5 p.m. on 01 87 65 30 80.

Description Model: NWR25 Ricardo Motor Newpower Generator generator set Continuous power: 17.6 kW / 22 kVA Maximum power: 20kW / 25kVA Engine: Ricardo Yangdong R490D, 4 cylinder water-cooled Connection: direct connection

The R134A AC refrigerant charge hose kit with gauge is suitable for Doth domestic refrigeration and automotive R134A systems. The cap tap is also compatible with Doth the R134a puncture type ar.d the R134a self-sealing type. An R134a puncture tap for direct connection to the puncture refrigerant canister is fitted to one end of the hose. The other end is fitted with a 1/4 SAE female fitting to connect to the fridge's male fitting. Coloured gauge with Fahrenheit and R134a scaled readings. BPV-31 Poppet Tap Valve, compatible with 1/4", 5/16% 3/8- O.D. pipe. InterchangeaDle Part Numbers: AP4502525, 3PV31D, GPV14, GPV31, CPV38. GPV56, MPV31. Constructed of metal for duraDility and corrosion resistance, this is a convenient replacement part. To connect the AC refrigerant charging hose to the self-sealing refrigerant tank, use the R134a self-sealing adapter with RH thread. The R134A AC charge hose kit will work with the puncture type refrigerant canister if this adapter is removed.

['.VIDE COMPATiBIlITY] - The R1234yf seif-sealing can tap refrigerant dispenser with R134A adapter, connects all R1234yf automotive air conditioning refngerant cans. Refrigerant Dottle opener with 1/2' LH female/internal thread, the 1/4' SAE male/external cooling pipe connection thread can direct fitting for R12 R22 manifold. The 1/4" SAE female x 1/2" male tank adapter fitting for R134A manifold. [R1234YF SELF-SEALING CAN TAP VALVE] - This R1234yf pro ac can tap valve designs with hand operated punch/valve control, it can ONLY been used for self-sealing R-1234YF refngerant cans with 1/2" LH thread, either cannot Be used on puncture style cans. [USEFUL TANK ADAPTER] - The R134A car a r conditioning tank adapter comes with 1/4- SAE female x 1/2” male flare, connects to R134A manifold. [PREMIUM QUALITY] - This R1234YF refrigerant seif-sealing can tap with adapter is made of heavy-duty orass alloy for durable using, with screw-on design and safety check valve

{VIDE COMPATiBIlITY] - The R1234yf seif-sealing can tap refrigerant dispenser with R134A adapter, connects all R1234yf automotive air conditioning refngerant cans. Refrigerant Dottle opener with 1/2' LH female/internal thread, the 1/4' SAE male/external cooling pipe connection thread can direct fitting for R12 R22 manifold. The 1/4" SAE female x 1/2" male tank adapter fitting for R134A manifold. [R1234YF SELF-SEALING CAN TAP VALVE] - This R1234yf pro ac can tap valve designs with hand operated punch/valve control, it can ONLY been used for self-sealing R-1234YF refngerant cans with 1/2" LH thread, either cannot Be used on puncture style cans. [USEFUL TANK ADAPTER] - The R134A car a r conditioning tank adapter comes with 1/4- SAE female x 1/2” male flare, connects to R134A manifold. [PREMIUM QUALITY] - This R1234YF refrigerant seif-sealing can tap with adapter is made of heavy-duty orass alloy for durable using, with screw-on design

Foam spray systems, for direct connection to high pressure washing equipment, for dense, highly effective foam without the need for separate low pressure equipment. Foam lances with and without quick coupling, for quick and efficient connection to the high pressure machine via the rear segment of the gun. Double lance system with injector and stainless steel dosing valve, which allows, using the same equipment connected to high pressure, spraying foam with one lance and rinsing at high pressure with the other lance.

With the decentralised solution, gwk adds a machine series that offers a high level of flexibility for numerous applications to its portfolio. The customer can individually and precisely set the ideal cooling water temperature for every production machine and for every process in production. Thanks to the direct connection to the consumer, there are no thermal losses, but instead a high flow rate and constant pressure. The weco wd series consists of easy to operate plug&play machines that can easily be installed and commissioned. Three processes can be run with the solution: Free cooling, refrigeration process for low temperatures down to -5°C and temperature control up to 90 °C –everything can be chosen as desired. There is a total of four models with cooling powers between 14 kW and 36 kW (at 15 °C feed flow temperature) and heating powers between 9 kW and 36 kW.

Pressol pneumatic Oil pump installation set for 200/220L drum model 19235600 To pump Engine, transmission, hydraulic oil. Ideal for direct connection to pipeline systems up to 70 m Can be easily combined with several hose reels Suitable for oil up to SAE 90 Installation set consisting of: Oil pump 3:1 model 19235 Compressed air hose 2 m DN10 with quick couplings Euro profile Oil drain hose 2 m DN13 with 1/2G bi.bu Ball valve 1/2 Filter Pressure Regulator with Oil Mister 20218950