Cast iron - Import export

Housing, grey cast iron. Bearing, ballbearing steel 100Cr6. Seal, rubber NBR. Pillow block bearings consist of a sealed singlerow ball bearing with a spherical outer ring which is mounted in a housing. Because of the spherical outer surface of the bearing, shaft misalignment can be compensated for. The bearings are manufactured with a plus tolerance. This results in transition or press fits when using shafts with htolerances. The shaft is secured by grub screws on the inner ring. In normal applications, pillow block bearings are maintenancefree due to the lifetime lubrication. In difficult environmental conditions relubrication can be carried out over the grease nipple. All housing dimensions are nominal dimensions for which the usual casting tolerances must be taken into consideration.

İFYIL Vera Pellet Fueled Smokeless Healthy Cast Iron Grill Grill & Barbecue (2 Kg Pellet Gift) - Black IFYIL PELLET HEATING SYSTEM STOVE BOILERS WOOD HVAC Özerteknik A.Ş. Company has been existing in heating sector for 28 years and established İfyıl Termo İklimlendirme San. ve Tic. Ltd. Şti. Industry Company in 2009 for the brand name “IFYIL” offering modern innovative solutions for heating systems. İfyıl Termo factory was established on 6.000 m2 of a total area of 20.000 m2. Company has already achieved an image and prestige on the market with 70 professional staff with the most modern know-how. In this regard, priorities of R & D Department of İfyıl Termo İklimlendirme are efficiency, energy saving and comfort.

Slide

Swivel

Swivel

Slide

Slide (high)

Saddlery buckle

Saddlery buckle-set incl. slide

Slide buckle, bended

Reference surfaces precision machined Note: Ring bolts for lifting are supplied. A cover prevents the cavities filling with swarf. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm

Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a defined assignment of clamping elements by repeat setups. The tombstones conform to machine tables for machine tools acc. to DIN 55201 and JIS 6337-1980. Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately. Please order protection plugs to plug unused grid holes separately. Ring bolts for hoisting are supplied. Other dimensions available on request. Drawing reference: 1) grid hole 2) hole for DIN 912 cap screw (D3/D4)

Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a defined assignment of clamping elements by repeat setups. The tombstones conform to machine tables for machine tools acc. to DIN 55201 and JIS 6337-1980. Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately. Please order protection plugs to plug unused grid holes separately. Ring bolts for hoisting are supplied. Other dimensions available on request. Drawing reference: 1) grid hole 2) hole for DIN 912 cap screw (D3/D4)

On request: Other slot widths. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm

GJL 250 annealed or EN AW-7075. Drawing reference: machined faces: ±0.25 mm length tolerance: ≤200 mm: +3/+10 >200 mm ≤590 mm: +8/+15 ≥600 mm: +20/+50

Round baseplates with T-slots are used for constructing modular fixtures. These baseplates are positioned and mounted directly on machine tables. The precise longitudinal and transverse slot spacing ensures very high repeat clamping accuracy. The aligning holes are used to align the baseplate on the machine table. Please order locating pins to locate the baseplates separately. Ring bolts with T-nuts for hoisting are supplied. Other dimensions available on request. On request: other dimensions. Drawing reference: 1) hole for DIN 912 cap screw (D4)

– Iron (pig, ductile iron), aluminum, steel and special alloy casting parts – Sand, gravity, centrifugal, continuous, metal injection and precision casting parts – Casting, machining, coating processes – All quality control tests (tensile, rupture, penetrant, tightness, CMM etc.) – Quality control reporting at all levels Our casting suppliers are companies that mostly work with abroad, have the necessary technical infrastructure, and are fast and solution oriented. We work with experienced suppliers who have the necessary laboratory facilities and quality documents.

Components such as stator housings, endshields, flanges, terminal boxes and various accessories are available from frame size 80 – 400 .