Electric motors - dc - Import export

The new direct-current motors with worm gear enable quiet and economically efficient operation with drylin® lead screw units. The worm wheel has a spline to which the drive pin of the linear unit is connected. As a result, a motor flange and coupling are unnecessary and, this taken in conjunction with the motor adapter angled by 90°, the structure of the linear module is very compact. Thanks to the integrated magnetic rotary encoder (2-channel hall), the new DC motors are suitable for positioning. - Space-saving and compact design - Easy to fit - Quiet operation - Rotary position encoder included - Suitable for: SLW-BB, SAW, ZLW

Electric motors of the MP112, MР132, MР160, MР225 type are DC motors used for the main movement of metal-cutting machines and other production mechanisms. The MР motor (112, 132, 160, 225) consists of an anchor, a stator-charged magnetic conductor, bearing shields, output device, fan assembly. All types of MР motors have a built-in tachogenerator (directly on the motor shaft), thermal protection, ventilation unit and output device. There are two types of tachogenerators in the MР series electric motors: the 4P tachogenerator (20V / 1000min-1) and the T5-10 tachogenerator (10V / 1000min-1) is a four-pole. The stator is housed in an aluminum shield that is centered in the rear engine shield and bolted. Thus the tachogenerators do not have their bearing system and rotate with the rotor of the motor. The MР motor unit consists of a three-phase asynchronous AT71A2 type motor - 0.370 kW (MР112, MР132 engine), AT80A2 - 0.750 kW (MР160, MР225 engine) and a turbine housing with a filter body.

High-torque electric motors of types 2MTA, 3MTA, 4MTA, 4MTB, 5MT are designed for feeding mechanisms of CNC machine tools, robots, trans-manipulators and other mechanisms. Electric motors of the MT series have the following typical designations: - 2MTA: 2MTA-C, 2MTA-P, 2MTA-K, 2MTA-CP, 2MTA-CK; - 3MTA: 3MTA-C, 3MTA-P, 3MTA-K, 3MTA-CP, 3MTA-CK; - 4MTA: 4MTA-C, 4MTA-P, 4MTA-K, 4MTA-CP, 4MTA-CK; - 4MTB: 4MTB-C, 4MTB-P, 4MTB-K, 4MTB-CP, 4MTB-CK; - 5MT: 5MT-C, 5MT-P, 5MT-K, 5MT-CP, 5MT-CK. Decoding of type designations on the example of “4MTA-CPK” where: “4” - symbol of the moment; "M" is the engine; "T" - a series; “A” - modification by moment; "C" - electromagnetic brake; "P" - resolver with multiplier; "K" - photoelectric raster converter (pulse encoder, encoder). All electric motors of types 2MTA, 3MTA, 4MTA, 4MTB, 5MT have a degree of protection IP-44 and are equipped with a four-pole tachogenerator of direct current 4P (20V / 1000min-1).

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

When combined with the appropriate gearbox, drylin® linear axes with the new BLDC motors achieve higher speed and greater torque. Energy is used more efficiently, as a result of which EC/BLDC motors are more durable and have a longer service life. Due to the fact that carbon brushes are not used, brushless motors are almost completely wear-resistant, generate less heat and enable longer, uninterrupted operation. The EC/BLDC motors have the same connections as NEMA 17/23/24/34 stepper motors. - Brushless motors enable higher speed and greater torque - Longer operating time and service life - Virtually wear-free - Less heat generated - for all drylin® linear modules and axes with NEMA17/23/24/34 hole pattern

For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.