Domestic water softeners - Import export

The household reverse osmosis filtration system gives a high purity of drinking water through a system of high capacity filtration that removes even the smallest microorganism or particles that may be present in the water. The filtration system consists of: Prefilter for sediment. Activated carbon filter. Reverse osmosis membrane. Postfilter activated carbon filter. A patented reverse osmosis unit that is unique on the market, whose design avoids the need for multiple connections and tubes, and possible water leaks. System with easy to replace filters. It incorporates a pump that ensures the required water input pressure necessary for proper operation and a pressured accumulator tank of 12 liters. It is installed under the sink in the kitchen and requires water inlet, drainage and electricity like a washing machine. A faucet for purified water has to be installed which can be the standard equipment or the special three way faucet head model with a more elegant design.

With SaveCost C, the parameterized hardness limit value is monitored in the range from 1 ppm to 18 ppm and the regeneration of the columns is triggered on the CLACK® control head if necessary. In addition to more operational safety, the softener generates up to 160% more soft water with less flushing water and salt. This also reduces operating costs by up to 60%. Monitoring and control is carried out on CLACK® control heads with the TWIN models; WS 1.0; WS 1.5; WS 2.0 and WS 3.0. With the integrated hardness sensor, the amount of soft water produced is monitored and forced regeneration is triggered when capacity is exhausted. The additional yield of soft water and the number of regenerations are displayed. In addition to the automatic self-monitoring, a chronological storage of operating data is integrated in the electronic operating diary (USB stick). A LAN data interface (Modbus) is available as an option.

Softcontrol RM monitors the soft water produced by the softener for increased hardness concentrations and also triggers the regeneration of the softener in terms of quality. The monitoring of variable water hardness limit values from 1 ppm to 18 ppm takes place as well as the quality-controlled triggering of the regeneration of two columns of the softener. A continuous measurement takes place as long as water flows. Indicators are dispensed with and low-maintenance ion-selective sensors are used instead. The device has self-monitoring so that, in the event of service, information is provided automatically for less maintenance. The measured values are output on the display, via a 4 to 20 mA current loop and via a LAN data interface with Modbus / TCP. The data is also saved in the electronic operating log (USB stick). Installation and parameterization is easy to carry out on the device.

Water hardness is influenced by changes in raw water, flow, pressure and bypass valve. The continuous monitoring of the water hardness behind a blending system with Softcontrol V-UE is therefore of great importance. The device monitors the limit value of the water hardness of blended water on a water softener approx. Every 30 seconds. The limit value can be parameterized in the range between 18 ppm and 360 ppm. The data is shown on the display, saved on the USB stick and output via a 4 to 20 mA current loop. The integrated ion-selective sensor works without the use of an indicator. Installation is simple, the limit value can be parameterized and the sensor, as the only common spare part, reports that it is easy to replace if necessary.

Softcontrol Data offers individual setting options and a clear presentation of the information on the display. The device is a comprehensive alarm system for upstream water softening systems with high safety requirements for the soft water quality. The limit values ​​for the water hardness can be set in the range from 1 ppm to 18 ppm based on the input water hardness. The measurement data and service messages are automatically saved in the readable, integrated USB stick and transmitted via a current loop and LAN interface with MODBUS / TCP. For increased operational and process reliability with the best user friendliness. A continuous measurement takes place approx. 2 times per minute as long as water is flowing. indicators are not used and an ion-selective sensor is used instead. This monitors itself and indicates the required exchange itself. This is usually the only maintenance on the device that has to be carried out around twice a year.

SALIS checks and alerts you immediately if there is a lack of salt or brine in the salt / brine tank of your softener. Routine controls can only be limited to the bare minimum. Easy and quick installation of the sensor in every softener with salt / brine storage. The evaluation unit is to be placed near the softener. Another external alarm, e.g. of the water softener, can optionally be connected and signaled. If the water softener is in the transmission / reception area of the WLAN, it is possible to receive the alarm conveniently via email. If there is no WiFi available on the softener, there is a potential-free contact in order to transmit the sensor's alarm by wire.

Nuestro sistema de Descalcificación del Agua INW-O® es el único sistema de su género que ofrece un tratamiento del agua y protección permanente sin el uso de sales o productos químicos, permitiendo almacenar el agua por periodos prolongados de tiempo sin que pierda efectividad el tratamiento. Con un sistema de bajo mantenimiento, hace rentable la prevención de las calcificaciones en sistemas industriales, municipales, industriales y residenciales. La tecnología que utiliza aparece en la Guía de Cumplimiento de Reglamentos de Construcción y ha sido probado de forma independiente como eficaz en la prevención de la acumulación de cal. Con un solo sistema podrá proteger una ubicación entera, INW-O® ofrece una atractiva oportunidad de Ingeniería de Valor. La unidad viene con un controlador que puede ser programado en BMS, lo que permite un fácil monitoreo de la operación del INW-O®.

Softcontrol Carbonate is used to monitor the decarbonised water after a decarbonisation system. If the parameterizable limit value is exceeded in the range from 9 ppm to 90 ppm, an alarm is triggered. the device measures approx. 2 times per minute with the help of the integrated ion-selective sensor. Thanks to its continuous analysis, it offers protection for downstream systems and their processes. In addition, the device system monitors itself and automatically indicates the simple change of the sensor without additional tools. The measured values ​​are shown on the display and output via the parameterizable 4 to 20 mA current loop.

We soften water for people at home in addition to treating water for industry. The softliQ is a water softener that thinks for itself and adjusts to your home's water consumption automatically. The breakthrough technology is wrapped in a fashionable, streamlined form with refined, maintenance-friendly materials. https://gruenbeck.nl

EMS series uses the basic laws of electromagnetic in such a way that puts it by the far above all popular magnetic andelectromagnetic anti-limescale devices which came before it.Thanks to its state-of-the-art design, EMS is not only more effective but also so much easier to install than itspredecessors. Compare to European brands, EMS is a cost-effective domestic product with faster and better after-saleservices.

GLASS LINED WATER HEATER TANK WITH TWO COILS

GLASSLINED HOT WATER STORAGE / HEATER TANK WITH ONE COIL. PRODUCED UP TO 5000 LTRS CAPACITY

hot water storage tanks meet domestic hot water needs of conscious users of 2000s through their improved technology and perfect design. A product resulted from an experience of more then half century in industry and advanced technology... It satisfies comfort, safety and economy simultaneously. Offers the most perfect selection range for villas, apartments, hospitals, hotels and business places through 100-6.000 liter volume easy to use and installation.

Incredible efficiency and savings. Installing a domestic hot water heat pump has the highest savings and fastest return than any energy upgrade available to home/building owners. For every 1kWh of energy consumed the heat pump can produce up to 5kWh of thermal energy. Our heat pumps typically pay for themselves within 3.5 years or even less if you receive government subsidies or a grant for the system. This outstanding financial performance is due to our unique heaterless design. Most heat pumps on the market rely on an additional electric heater to cope with daily demands, increasing their real power consumption. All our products have a unique heaterless design which produces the same hot water temperatures (up to 62˚C) but without a power consuming electric heater. This efficiency results in significant savings over time. Benefits: - Incredible efficiency and savings - Free ventilation & cooling - Optimized performance - Reliable and durable - Long lasting and easy to maintain