Drywall steel sections - Import export

Simple ceiling construction – applicable in rooms of maximal width of 4 meters and maximal area op to 16m2. For bigger areas, two-layered construction should be applied. Partition walls made with the application of CW and UW profiles are so-called light steel framing constructions. Top hat profiles are used for direct assembly of plasterboards: - when making ceiling or wall coverings with a small mounting height or width - used in places requiring a minimal thickness of the lining - the possibility of direct assembly to concrete walls, wooden ceilings

Omega sections characterised as ΩTR60, ΩT110, ΩTR160, ΩTR210, ΩTR260; Profiles sold in EN 10346 steel: Hot-dip galvanised Z:200, 275 | Zin+Mag:175, 250; Drilling is carried out according to the position indicated by the customer.

Omega sections characterised as ΩTR60, ΩT110, ΩTR160, ΩTR210, ΩTR260; Profiles sold in EN 10346 steel: Hot-dip galvanised Z:200, 275 | Zin+Mag:175, 250; Drilling is carried out according to the position indicated by the customer.

In rooms where electrical, power, logistic or ventilation installations need to be installed under the floor, a raised floor system is necessary. Steel profiles are the very important element of the supporting structure of this system. The steel grate made of profiles with dimensions: 40/40x2,00 and 40/82x2,00 is an excellent and stable base for boards. It increases the load capacity of the entire system. Thanks to this, the arrangement of the surface runs very smoothly and in accordance with the standards. Product application: - office space arrangement, auditoriums, non-standard facilities. - an arrangement of industrial and technical areas (server rooms, electrical switchboards)

------------