Electronics industry - Import export

We are one of the leading Polish PCB manufacturers for many electronic industries. Since 1981, we have been constantly improving technology and machinery park. We specialize in the production of doublesided and singlesided PCBs on laminates FR4, MC PCB, CEM3T. We produce 2,000 sqm of PCBs monthly. We carry out medium and small production batches including 48H express orders of prototypes.

Testing requirements for a manufacturer in electronics industries had changed: For an assembly included in a smartphone, the absence of contact between speaker ultra fine wires and adjacent components is essential. Fulfillment of this condition, until now only subjected random sampling by microscopy, from now on has to be verified in a 100% procedure. Due to labor cost, microscopy for this amount of inspection is no more lucrative. Detection of ultra fine wires in electronic device The particular challenge The fine wires made of copper in smartphone speakers dispose of a high reflection and only a small diameter. The QuellTech Solution A high-resolution QuellTech 2D/3D Q4-5 Laser, featuring a particularly adapted laser wavelength and an ultrafine laser line in the corresponding installation, is combined with a linear axis equipped with a convenient encoder output. Due to its special chip analysis, the Quelltech sensor delivers a stable and highly reproducible signal on the fine wires

Alarge range of Schlegel high precision control knobs for industries, electronics, etc... The ASI Control concept Control Units for AS-Interface Battery-free Wireless Pushbutton DUX-Basic DUX Limit Switches EK Series KOMBITAST-R Minibox for profile rail systems or wall-mounting OKTRON-JUWEL OKTRON-R QUARTEX-R QUARTEX-R-JUWEL QUARTRON QUARTRON-JUWEL RONDEX RONDEX-M RONTRON-Exclusive RONTRON-Q-JUWEL RONTRON-RJ-Stainless Steel RONTRON-R-JUWEL USB Jack / Protective Lids RVA series - stainless steel RX-JUWEL

The “casing” sector for the electro and electronics industry was developed as a result of demand from the lighting industry for transformer housing for NV lights. Here we can emphasise our housings for electronic mounting devices. Individual customer requirements can be realized cost-efficiently by using insert adapters. Other products for the electrical industry are connectors, strain relief and cable fastening.

Application SMT, BGA, CSP, Flip Chip, LED Detection, Semiconductor, Packaging components, Battery Industry, Electronic components, Automotive parts, Photo-voltaic, Aluminium Die-casting, Moulding Plastic. Ceramics, other special industries.

BIEGLO offers PEEK micro-mold parts up to 12mm in the largest dimension. Our smallest part to date is roughly 800µm x 300µm x 380µm and the thin wall section near 0.1mm. The feature aspect ratios around 6:1. In addition, the part volume 0.08 cm3 or less, the gate size as small as Ø0.1mm and the ejector pins as small as Ø 0.254mm. PEEK micro-mold parts must have a gate and ejection location consideration and the material selection can greatly affect the fill and definition of features.

Manufacturing Process CNC Machining & Injection Molding PEEK performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK Produced from virgin polyetheretherketone resin and offers the highest toughness and impact resistance of all types. ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fiber reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values. ARKPEEK-GF30: 30% glass fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite high performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical.

Our micro size PEEK rods are engineered for precision instruments that require high-performance materials. With diameters ranging from 0.3mm to 1.0mm, these rods provide exceptional mechanical and thermal properties, making them ideal for a wide range of applications. One of the key advantages of our micro size PEEK rods is their dimensional stability. These rods exhibit minimal expansion or contraction under different temperature and humidity conditions, ensuring consistent performance and accuracy in precision instruments. Additionally, our micro size PEEK rods offer excellent mechanical properties, including high strength-to-weight ratio, low friction, and excellent wear resistance. These properties make them suitable for use in various precision instruments such as probes, sensors, and actuators.

The PEEK Arm Thrust Washer is a versatile and reliable component designed for various industrial applications. Made from high-performance plastic PEEK material, it offers exceptional resistance to chemicals, wear, and extreme temperatures. This washer is specifically engineered to withstand high-pressure environments, ensuring optimal performance and longevity. Whether used as a thrust bearing or for precision engineering, the PEEK Arm Thrust Washer provides reliable support and stability, making it an ideal choice for demanding machinery and equipment.

NSPV PV4.0 Solar panel connector 1000VDC Features: TUV certified; Imported PPE insulation material; IP67 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ. P.S.: Prices excluding dustproof cap.

NSPV PV4.0 Solar panel connector 1500VDC long type Features: TUV certified; Imported PPE insulation material; IP68 degree of protection at 1m,1H; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5 kV DC.

NSPV PV4.0 Solar panel connector 1500VDC standard type Features: TUV certified; Imported PPE insulation material; IP68 degree of protection at 1m,1H; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5 kV DC. P.S.: Prices excluding dustproof cap.

Experience audio excellence like never before with our PEEK Film Diaphragms and Cones. Crafted with precision and innovation, these components are designed to elevate your sound system to new heights. Whether you're an audiophile seeking unmatched clarity in your headphones or a music enthusiast looking to enhance your speaker's performance, our PEEK film technology delivers crystal-clear sound, distortion-free reproduction, and an immersive listening experience. Upgrade your equipment and immerse yourself in the world of premium audio quality with our PEEK Film Diaphragms and Cones.

Amorphous PEEK Film is a remarkable material prized for its unique blend of qualities. With exceptional optical clarity, chemical resistance, and remarkable durability, it stands as the preferred choice across a multitude of industries. Whether you're crafting precision optical components, developing cutting-edge medical devices, or seeking durable solutions for various applications, Amorphous PEEK Film delivers unmatched versatility and performance. Explore the potential of this exceptional material and see how it can elevate your product's performance, inspire innovation, and meet the demands of even the most challenging projects.

OVERVIEW of PEEK Insulating Film Experience unmatched insulation performance with Semi-crystalline PEEK Film. Engineered to excel in electrical and thermal insulation systems, this advanced material ensures reliability and efficiency in even the most demanding environments. Elevate your insulation standards and trust in the insulating prowess of Semi-crystalline PEEK Film for your critical applications.

Features of 2023 New Arrivals Solar Fuse Connector: 1.Rated voltage up to 1500VDC. 2.Rated current up to 100A. 3.Rated breaking capacity reach 10kA. 4.In conformity with IEC60269.6 standard.

BIEGLO offers finished or semi-finished parts directly formed from polyimide powder with all the attributes of sintered PI. The advantage of direct formed parts are the lower costs as quantitiy is increasing. Due to almost zero percent waste during production it can be a more economic production method. Machined parts are widely used for small series high precision applications. Polyimide direct formed parts can be used in different applications: Automotive industry: racing engine fuel line. Jet engine: vane bushing or lock nut insert. Industrial machinery: hotrunner systems nozzles or plasma cutting torch as gas distributers or sealing components. Semicon HDPCVD Equipment: e.g. heater coil spacer. Life sciences: rotor seal or pneumatic surgical tool vane.

Material: Amorphous, Semi-crystalline and Mineral Filled Semi-crystalline. PEEK (polyetheretherketone) Film Provides: ● High Temperature Performance ● Excellent Tribological Properties ● Broad Chemical Resistance ● High-Strength & Toughness ● Electrical Stability & Radiation Resistance ● Low Smoke & Toxic Gas Emission ● High-Purity, extremely low extractables Appication: ● Micro speaker diaphragm, dome tweeter. ● Presslire exchanger and senior oliaphragin. ● Aerospace high-speed rail insulation and TAB heat insulation components. ● Thrust washers for micro motors, gaskets for automobiles. ● High-temperature resistant label, pressure sensitive tape substrate. ● Insulation layer of electric vehicle battery. ● Flexible film surface heater. ● Wire, cable, insulation and wrcop sheaths.

STOL®76 is a precipitation hardened CuNiSi alloy for applications in the automotive, electrical and electronics industries. This alloy is particularly suitable for components in the medium strength range (up to 620 MPa). The combination of good electrical conductivity and good relaxation resistance makes this alloy especially recommendable for automotive connectors.

BIEGLO is the official distributor of Saint Gobain Performance Plastics for the Meldin 7000, Polyimide rod. In line with different requirements of the Industrial market, the Meldin product family can provide high temperature resistance, wide chemical resistance, good mechanical properties also at elevated temperatures and low wear, long lifetime. Polyimide rod can be used in temperatures up to 350°C continuously and it has various applications in the automotive, aerospace and electronic industries. Polyimide rods have a standard length of 965mm. The diameters of the solid bars are distributed from 6.3mm to 82.5mm.

Polyetherimide is an amorphous thermoplastic and part of the polyimide family. It has excellent dimensional accuracy over a wide temperature range and has low thermal expansion. BIEGLO's sales portfolio for PEI contains rods from 8mm to 100mm. The most common applications of PEI are in the food and beverage industry, pharmaceutical and electronics industry as well as precision engineering.

Absolute indicator with Industrial Ethernet interface which enables process-capable and intuitive positioning for manual machine adjustments. The display and evaluation of target and actual values ensures monitored format adjustment. Integrated Industrial-Ethernet-Fieldbus.Backlit two-row LCD. Display of target and actual value displays with integrated alignment. Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. Mechanically compatible with the DA09S and AP10 position indicators. IP53 type of protection, IP65 as an option

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.