Ferrite magnet - Import export

Various of magnets are customized Both magnet with countersunk and the whole magnetic pot assemblies are available. 1.Grade range: N35-N52, N33M-N50M, N35H-N48H, N35SH-N45SH, N28UH-N40UH, N28EH-N40EH, N28AH-N33AH 2.General shapes and size,please look at the table. Max size is 230mm,max length of the magnetization is about 60mm for special customized. 3.Coating/plating:NiCuNi,Ni,blue-white Zn or colorful Zn,Ni-Ag,Ni-Au,Ni-Sn,black epoxy or grey epoxy 4.Magnetization direction: a.Axially magnetized for disc and cylinder; b.Thickness magnetized for block and arc and other shapes; c.Diametrally magnetized for ring,cylinder;segment; d.Radial magnetized for ring magnet,the thickness of ring is within 7mm; e.Customized specific requiremets magnetized,such as Multipole magnetized.

There are 6 types of dry pressing ferrite powder for customers: YXC-C1, YXC-C2T, YXC-C3T, YXC-C1, YXC-C2. The procedure summaries for making magnet are as follows: •The necessary secondary additives have been added into the powder during the grinding process. Customers only need to add proper quantity of binders and lubricants. The powder must pass through 120 mesh sieve before pressing, so as binders to be uniformly distributed for better orientaton •Please take care of the cleaning of the equipments. Any other materials and impurity should mot be mixed into the powder •During pressing, the pressure required is ≥5000N/cm2, and the magnetic field density is >7000 Oe(560KA/m) •The sintering temperature for reference is between 1220 °C and 1270 °C. Please note that the proper sintering temperature should be defined in accordance with the status of the sintered sample pill

Sintered hard ferrite magnets are manufactured by a die pressing followed by sintering process which allows economic production of components in a varied array. Sintered hard ferrite magnets are manufactured by a die pressing followed by sintering process which allows economic production of components in a varied array of sizes and shapes. Ferrite magnets have excellent corrosion resistance and have normal operating capabilities between -40 °C and +250 °C.

Strontium Dry Pressing Ferrite Magnetic compound are suitable for producing magnets by dry pressing. Strontium ferrite material features better magnetic property than barium ferrite material in the area of remanence induction intensity, coercivity and magnetic hysteresis loss. Strontium compound have been added proper quantity of binders and lubricants and pass through 120 mesh sieve,so as binders to be uniformly distributed for better orientation. We could supply the compound in both spray dried or vibration granulated form.

Applications: •Magnetic rollers for copier and laser printer •Permanent motor magnets (rotors & other components) •Magnetic rings for aerodynamic component •Color Monitor/TV purity convergence magnet •Binders: PA6, PA12, PPS Characteristics •Binders: PA6, PA12, PPS •Can be magnetized in any direction, suitable for the radial or axial(face) multi-polar magnetized magnet. •One time forming the complex shape. •Forming the shape with the shaft or bushing one time to reduce assembly processes and improve assembly accuracy. •No surface treatment.

YX Wet Pressing Strontium Ferrite Magnetic Powder Specifications YX series wet pressing strontium ferrite magnetic powders have been designed to produce all grades of hard ferrites. The users can produce high quality magnets by adding the provided additives into the powders. Our highly automatic instruments and strict quality control system ensure that the quality is stable and reliable

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry.

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry.

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry.

Following standard colours are available ex stock: blue, yellow, green, orange, red, black, white Following standard colours are available short term: brown, grey, light blue, pink, turquoise, violet Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » Plastic housing with metallized surface (for example silver)

Alternative to the standard we also offer individual solutions: » Lacquering also possible in other colours

Following standard colours are available ex stock: blue, yellow, green, orange, red, black, white Following standard colours are available short term: brown, grey, light blue, pink, turquoise, violet The NdFeB magnets with a diameter of less than 25 are not fitted with a plastic ring on the holding surface. Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » Plastic housing with metallized surface (for example silver)

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)

Following standard colours are available ex stock: blue, yellow, green, orange, red, black, white Following standard colours are available short term: brown, grey, light blue, pink, turquoise, violet Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » Plastic housing with metallized surface (for example silver)

Alternative to the standard we also offer individual solutions: » Lacquering also possible in other colours » Equipped with a closed eyelet » Higher holding force

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)

The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets.

These systems with an improved protection against corrosion are used especially on delicate surfaces and have a very high adhesive force at large distances from the counterpart. The extremely soft rubber coating leads to higher displacement forces. Thanks to the large pole gap these systemes have a high adherence even on rounded surfaces (such as wind towers). Alternative to the standard we also offer individual solutions: » Other colours of the rubber coating » Harder rubber coating » Printed rubber coating according to your specifications » Other mounting options (such as external thread) » Higher adhesive force