Copper alloys - Import export

To join the insulation sleeves

The INSTALLATION KIT offers a practical pre-equipment solution:Everything is packed in one box.

For long periods uncoupled, install the PE caps (F-M)

8 multi-diameter bypasses Copper for brazing: Black insulation: Black insulation BL-s3,d0 (M1) 13MM Bend: MSH85 only

The insulated tube is used to manufacture tubing. In 20, 25 or 30 m insulated coils, it can be cut, flared or crimped on-site.Black elastomer insulation (13 or 19mm) is generally used in Industrial refrigeration or in very humid regions. The copper coil offers the advantage of being independent and can be cut to the required length. Tubes are already insulated which saves time during installation. Elastomer-insulated tube only exists in mono-tube.

The INSTALLATION KIT offers a practical pre-equipment solution, in particular when preparing a future startup: Everything is packed in one box.

AC16C - 16/18 L = Length Connection

For the insulation or repair of heating and air conditioning systems.The insulation meets the requirements of the EUROCLASSE standards for fire category buildings. Continuous reels available.

Protects the outdoor insulation from U.V. and inclement weather.

The PACK'CLIM is an easy “all in one” solution. Prices may change It contains everything needed to install an air conditioner in one box: Tubing, wall or floor bracket, cable and condensate tube, etc. according to the This complete kit saves a lot of time. Compatible with all refrigerant fluids.

Eid is the exclusive distributor of the REFNET® brand: Distribution unions for VRF variable refrigerant flow air-conditioning systems Saves time with multi-diameter inlets and outlets, to be cut as required. Minimum charge losses and minimum brazing. On request, we supply models that exactly meet your needs, whether following our recommendations, to drawings (block diagrams), or following manufacture of "Constructor Equivalence" kits.

8 multi-diameter bypasses Copper for brazing: Black insulation: Black insulation BL-s3,d0 (M1) 13MM Bend: MSH85 only

HEADERs are perforated tubes for VRF (variable refrigerant flow) air conditioning systems. They centralise an assembly of bypasses. Minimum charge loss. Minimum brazings. They centralise an assembly of bypasses (only 1 inspection point).

HEADERs are perforated tubes for VRF (variable refrigerant flow) air conditioning systems. They centralise an assembly of bypasses. Minimum charge loss. Minimum brazings. They centralise an assembly of bypasses (only 1 inspection point).

Eid is the exclusive distributor of the REFNET® brand: Distribution unions for VRF variable refrigerant flow air-conditioning systems Saves time with multi-diameter inlets and outlets, to be cut as required. Minimum charge losses and minimum brazing. On request, we supply models that exactly meet your needs, whether following our recommendations, to drawings (block diagrams), or following manufacture of "Constructor Equivalence" kits. Some manufacturers specify an equal distribution of the fluids between outlet and bypass. The U body meets this requirement

Reducers and increasers are used to reduce or increase the diameter of one to three REFNET® sections

Reducers and increasers are used to reduce or increase the diameter of one to three REFNET® sections.

Eid is the exclusive distributor of the REFNET® brand: Distribution unions for VRF variable refrigerant flow air-conditioning systems Saves time with multi-diameter inlets and outlets, to be cut as required. Minimum charge losses and minimum brazing. On request, we supply models that exactly meet your needs, whether following our recommendations, to drawings (block diagrams), or following manufacture of "Constructor Equivalence" kits.

Quick couplers 1 5/8 8 Screw fitting Male Brass/Copper for brazing female. Diam Type 1 1/4 8 Quick couplers 1 3/8 8 Screw fitting Female 1 1/2 8 Brass/Copper for brazing female.

The disconnectable tubing makes the installation disconnectable. We manufacture tubing (2 gas-liquid lines), equipped with 4 disconnectable female unions, and we supply the 4 disconnectable male unions, that you will have to screw on the machine side. Work on a refrigeration circuit (connection / commissioning) should only be carried out by a technician holding a proficiency Certificate, details ART.543-78.)

Schrader valves for PE couplers Pressure gauge pick-off cap for PE couplers

Fluids R22 & R407 Seal-break couplers With copper tube 150mm-long to facilitate brazing Screw together, Male or Female 1/4 SAE With or without pressure gauge pick-off. Brass for brazing (PE).

Fluids R22 & R407 Seal-break couplers With copper tube 150mm-long to facilitate brazing Screw together, Male or Female 1/4 SAE With or without pressure gauge pick-off. Brass for brazing (PE)

Allows two precharged systems to be coupled when screwed together. Unions are tightened with two spanners, until the 2 seals, male and female, are broken.

Allows two precharged systems to be coupled when screwed together. Unions are tightened with two spanners, until the 2 seals, male and female, are broken.

Allows two precharged systems to be coupled when screwed together. Unions are tightened with two spanners, until the 2 seals, male and female, are broken.

Still wrongly referred to as precharged tubing, the “ready-to-use” tubing is simply tubing that is vacuum drawn. Prices may change It enables the two elements of a system to be connected, without having to vacuum redraw on the site and charge the tubing with gas. No action is required, according to the price of copper the line is ready to be installed and the air conditioning ready to operate. This product already exists in a basic version or as a complete kit (with condensate tube and electric cable). Any work on a refrigeration circuit (connection / commissioning) must be carried out by a technician holding a proficiency certificate. (detail ART.543-78.)

AC16C 16/18 Condensate length = Tubing length

The PACK'CLIM is an easy “all in one” solution. Prices may change It contains everything needed to install an air conditioner in one box: Tubing, wall or floor bracket, cable and condensate tube, etc. according to the This complete kit saves a lot of time. Compatible with all refrigerant fluids.