Shrink wrapping - Import export

TECHNICAL DETAILS Paste coating for a good finish on interior walls and ceilings. Provides excellent surface preparation before painting or hanging coverings. COMPOSITION AND APPEARANCE Emulsion resin, calcium carbonate, rheological agent and various additives. SEMIN ENDUIT DE LISSAGE is a water-based coating. The paste is white in colour. COVERINGS • Wallpaper • Paint • Wall covering SUITABLE SURFACES Interior walls and ceilings • Plasterboards • Plaster tiles • Concrete • Cement coating TECHNICAL CHARACTERISTICS • Density of paste : 1.9 • Granulometry : fine • pH : 7 Adhesion : complies with NFT 30 608 PACK SIZE 4 and 10 kg buckets on shrink-wrapped pallet. APPLICATION Apply manually using a smoothing trowel or a filling knife. The maximum thickness will be 2 mm per coat. Allow to harden and remove imperfections before sanding, if necessary. Print the SEMIN ENDUIT DE LISSAGE if applying satin-finish or gloss paint. Clean tools in water.

TECHNICAL DETAILS Powder filler for all types of interior filling work on uneven substrates. SEMIN HIGH BUILD FILLER has very good filling properties. SUITABLE SURFACES All types of interior surfaces: bubbled concrete, untreated concrete, cellular concrete, irregular plaster, heating ceiling, terracotta tiles, uneven substrates... Covering After the filler has dried completely, suitable for covering with all types of plaster-based coatings, thick coatings, wall paper paste, wall coverings. REFERENCE DOCUMENTS • Filler complies with standard NFT 30 608 • DTU 59.1 : painting work • Technical notice CSTB N°9/99-681 TECHNICAL CHARACTERISTICS • Granulometry : up to 0.5 mm • Adhesion : complies with NFT 30 608 • pH : neutral • Usage time for batch : 24 hours PACK SIZE 25 kg bags on shrink-wrapped pallet. APPLICATION May be applied manually with a smoothing trowel or coating blade, or mechanically by spraying then manual smoothing. THICKNESS OF APPLICATION Up to 5 mm in one pass.

COMPOSITION AND APPEARANCE Plaster-based powder coating containing calcium carbonate, resin and various additives. The mixed paste is white in colour. SUITABLE SURFACES Concrete, chipboards, cement coating, aerated concrete. REFERENCE DOCUMENTS DTU 25.41 and 25.42. Standard NF EN 14496. CE mark. TECHNICAL CHARACTERISTICS • Setting time: 2 hours. • Reaction to fire A1. PACK SIZE 25 kg bag on shrink-wrapped pallet. 5 kg bag. PREPARATION OF SURFACES The wall surface must be sound, free from dust and oil, and show no signs of damp. In summer if the supports are too dry, they may be slightly moistened. QUANTITY OF MIXING WATER 12.5 litres of water per 25 kg bag. APPLICATION Generally applied in “dabs” approx. 10 cm in diameter, with 30 cm horizontal spacing and 40 cm vertical spacing on the plasterboard or insulation.

TECHNICAL DETAILS Powder filler for all types of interior filling work on uneven substrates (rough precast concrete, for instance). COMPOSITION AND APPEARANCE Plaster-based powder coating containing calcium carbonate, resin and various additives. The mixed paste is white in colour. SUITABLE SURFACES Interior walls and ceilings: Bubble concrete, bare concrete, cellular concrete, irregular plaster, heating ceiling, uneven surfaces, etc. OVERLAYING After the filler has dried completely, suitable for covering with all types of plaster-based coatings, thick coatings, wall paper or wall coverings. TECHNICAL CHARACTERISTICS • Granulometry : Up to 0.2 mm • Adhesion : complies with NFT 30 608 • pH : neutral PACK SIZE 5 and 25 kg bags on shrink-wrapped pallet. STORAGE 9 months in unopened original packaging stored away from moisture. PREPARATION OF SURFACES Surfaces must comply with DTU 59.1, i.e. be clean, dry, dust-free and free from all traces of form oil.

Pôle Cosmétique specialises in the contract manufacture of cosmetics. Our production facility is equipped to handle small runs (50kg / 500 bottles) as well as larger runs (> 1 tonne / > 10,000 bottles), in full compliance with GMP hygiene and quality standards. Our various packaging pumps can fill liquid products (oils, lotions), semi-viscous products (shampoos, milks) and viscous products (creams, toothpastes) in most types of bottle (jars, pump bottles, airless bottles, etc. from 5mL to 1L). Pôle Cosmétique does not stop there, but also subcontracts all the operations involved in delivering the product in its final packaging, under your brand: batching, labelling, boxing, shrink-wrapping, boxing and palletising.

Cosmetics contract manufacturing Production Production center from 50kg / 500 bottles to > 1 tonne / > 10000 bottles Our filling pumps are suitable for filling liquid products (oil, perfume), semi-viscous products (shampoo, lotion) and viscous products (cream, toothpaste) into most types of bottles anf jars from 5mL to 1L. Pôle Cosmétique can also take care of all the steps required to deliver finished products in their final packaging under your brand: printing batch numbers, labeling, packing, shrink-wrapping, palletization. Pôle Cosmétique has a specialization in contract manufacturing of cosmetic products. Our production facility adheres to the latest technology and GMP standards and is fully equipped for small series (50kg / 500 bottles) as well as for larger series (> 1 ton / > 10000 bottles).. Our tank reactors are suitable for all types of skin care products (face cream, body lotion, etc.), hair products (shampoo, hair mask, hair relaxer, etc.) and other types of...