Gas pipes - Import export

1) Material: Aluminium Product Name: Aluminium Gas Dispenser Pipes Place of Origin: TURKEY Features: 1) Material: Aluminium 2) Size: Different sizes available 3 ) Applications: Gas cooker, ovens and stoves 4) Accessories: 2 brass connectors 5) We can supply all kinds of aluminium pipes

They are placed in the ditches and in the construction of underground nets for the indication of the pipeline that has below. Specifically, red is used for PPC cables, blue for water pipes, yellow for gas pipes, orange for telecommunication cables, brown for sewers.

Various products

PLT Mechanical joint DN 20 R 1/2“ 1 M-0040858 PLT Mechanical joint DN 20 R 3/4“ 1 M-0040860 PLT Mechanical joint DN 25 R 1/2“ 1 M-0040859 PLT Mechanical joint DN 25 R 3/4“ 1 M-0040861

Kofulso was established in 1989 as a company that manufactures gas pipes, drinking water pipes, new construction pipes used in firefighting and disaster prevention systems, industrial flexible pipes, and brass connectors. http://www.kofulso.co.kr/

CSN ® Explosionproof gas preheaters are used for heating of fuel gases in hazardous areas. The devices consist of gas pipes which are molded together with an ExFlange heater in a cast aluminum body. Further information about our CSN® Exgas preheater

The barrel pump's universal adapter fits onto container openings of 30 - 70 mm, closing tightly. The container screw joints can be screwed into the container with the 3/4" thread and lock nut. The gas-tight barrel pump enables odour-free transfer. During transfer with normal pumps, it is impossible to prevent vapours escaping into the atmosphere. The gas-shuttle method avoids this. Any vapours produced are returned from the container which is to be filled to the original container via the gas-shuttle pipe. The gas pipe and the liquid pipe are additionally provided with stopcocks. Gas-tight pumps are used for substances that have a strong smell such as ammonia.

Gas-tight barrel pump with flexible discharge hose for filling off into large canisters and containers. Convenient transfer because the canister can stay on the floor. The connection cone is held onto the container. The gas-tight barrel pump enables odour-free transfer. During transfer with normal pumps, it is impossible to prevent vapours escaping into the atmosphere. The gas-shuttle method avoids this. Any vapours produced are returned from the container which is to be filled to the original container via the gas-shuttle pipe. The gas pipe and the liquid pipe are additionally provided with stopcocks. Gas-tight pumps are used for substances that have a strong smell such as ammonia.

Production standards are summarized as below for Cold Formed Sections; Water and gas pipes: EN 10217-1 TR1, EN 10255, DIN 2440, BS 1187, ISO 65, N FA49-145, ASTM A53, ASTM A500, DIN 2999-2986, BS 1387, ASTM A53 Industrial Pipes: DIN 2458-1615 & 1626, BS 6363, BS 6323, BS 1139, EN 39, EN 10219-2 Open Sections: EN 10162 Square and Rectangular HS: EN 10219-2, DIN 2395, DIN 59411, BS 6363, N FA49-541, ASTM A500, UNE 36-537, SI 1458 For Hot Formed Sections as per EN 10210/ASTM A501.

IRwin® Methane Leak Detector is an innovative, portable natural gas detector for easy gas pipe survey and gas leak detection. It is developed in accordance with many national directives, such as the DVGW (Deutscher Verband des Gas- und Wasserfaches) directive. The IRwin SX-models are certified for use in Zone 0, classification Ex II 1G, Ex ia IIC T3 Ga. The integrated proprietary infrared sensor system (patents pending) has a fast reaction and short recovery time. The system prevents false leak alarms and ensures correct and fast leak evaluation. The specially developed Gas Chromatograph (GC) and IR-sensor combination allows fast distinction between marsh gas and natural gas from all known natural gas sources. The IRwin GC gives fast test results, even at low ethane concentrations, from 1000 ppm methane leaks. IRwin is able to measure methane according to the traditional operating modes required by DVGW G 465-4, such as "Inspection above-ground" and "Measuring bar holes". The...

Assembling screw threaded connections subjected to high temperatures and corrosive influences Screwed connections at pipe fittings, flange joints and fittings in superheated steam lines Combustion chamber screwed connections and mounting bolts of gas and oil burners Screwed connections at combustion engines, exhaust systems, silencers and exhaust gas pipe connections Advantages and benefits Allows reliable non-destructive dismantling even after longer operating period under high operating and ambient temperatures Provides an optimal ratio of screw pretension and tightening torque Electrically conductive To achieve optimal adhesion clean the thread or the sliding surface first mechanically and then with OKS 2610/OKS 2611 universal cleaner to remove soiling as well as any lubricant residues. Use a brush, spatula or similar to apply a sufficient amount of paste to the head or nut contact surface and to the thread. Spray on evenly OKS 241 spray. The paste will also act as a sealant.

Assembling screw threaded connections subjected to high temperatures and corrosive influences Screwed connections at pipe fittings, flange joints and fittings in superheated steam lines Combustion chamber screwed connections and mounting bolts of gas and oil burners Screwed connections at combustion engines, exhaust systems, silencers and exhaust gas pipe connections Advantages and benefits Allows reliable non-destructive dismantling even after longer operating period under high operating and ambient temperatures Provides an optimal ratio of screw pretension and tightening torque Electrically conductive Also available as spray version OKS 241 To achieve optimal adhesion clean the thread or the sliding surface first mechanically and then with OKS 2610/OKS 2611 universal cleaner to remove soiling as well as any lubricant residues. Use a brush, spatula or similar to apply a sufficient amount of paste to the head or nut contact surface and to the thread.

it is characterized by high chemical resistance to certain acids, oils and fats. It is easy to weld, but it does not conduct heat, it is nontoxic and harmless to people. It is made of containers for yogurts, bottles, tourist plates, cable insulations, bumpers, gas installation pipes. He also found application in the production of laboratory and medical equipment.

Specially developed for the diverse tasks on the construction site, the Schütz Messtechnik company offers tailor-made measuring tools that reliably and comprehensively support the craftsman in all of his work “all around gas”. The complete solution for the load, leak tightness and usability test on gas pipes can be carried out safely and quickly, including documentation. GDPR-compliant as all personal data is protected against unauthorized access by a PIN. The measurement result can be printed out at the test point on site (optional), fully automatically and without interrupting the system. The professional solution for all measurements according to TRGI The prescribed load tests, tightness tests and usability tests, in the interior installation are possible with just one measuring device With integrated pump for pressure generation Very short measuring time through reference leak measurement PC software included

Flue gas flowmeter for continuous measurement of gas velocity, temperature and pressure in exhaust gas ducts (chimneys or flue pipes).

The ASCO CO2 Flowmeter has been developed to accurately measure CO2 gas flow in closed pipes. The power unit, which supplies 230 V, operates a microprocessor controlled flow computer and one sensor. The ASCO CO2 Flowmeter is a complete system which is supplied fully calibrated and wired and therefore very easy to install.

ASTM 1066 High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-mechanical Controlled Process (A1066 Gr. 50, A 1066 Gr. 60, A 1066 Gr. 65, A 1066 Gr. 70, A 1066 Gr. 80) EN 10208-1 Steel pipes for Combustible Fluids, pipes of Class A (L210GA, L 290 GA, L 360 GA) EN 10208-1 Steel pipes for Combustible Fluids, pipes of Class B (L245NB, L 415NB, L 245MB, L 555MB, L 360 QB, L 555 QB) API Spec. 5 L/ISO 3183 Steels for Line pipes PSL1 Gr.A (L210) – X 70 (L485) API Spec. 5 L/ISO 3183 Steels for Line pipes PSL2 Gr.BN (L245N) – X 60N (L415N) Gr.BQ (L245Q) – X 56Q (L390Q) X60Q(L415Q) – X80 Q (L555Q) Gr. BM (L245M) – X80M (555M) X90M (L 625M), X100M (L690M)

Air-water / air-air heat exchanger as smooth tube heat exchanger up to 1,000 ° C Smooth tube heat exchanger as an air / water heat exchanger In the case of air-water heat exchangers (also called gas-water heat exchangers), a temperature exchange takes place between a gas (usually air) and a liquid. As a rule, the liquid medium flows inside the pipes, while the gaseous medium flows around the pipes outside the pipes. Smooth tube heat exchangers can cover various areas of application: heating, cooling and condensing as well as heat recovery. Smooth tube heat exchanger as air-to-air heat exchanger Smooth tube heat exchangers are also often used as air-to-air heat exchangers. In this application, a gas (e.g. exhaust air or exhaust gases) flows inside the pipes and a gas (e.g. fresh air) outside the pipes around the pipes.

Leak detection in the age of digitalization SONOCHEK is a digital ultrasonic testing device to detect inaudible waves and frequencies in the air or in a metal machine frame. It is primarily used to detect leaks in any industrial air and gas pressure pipes and vacuum systems. Leaks of compressed air and gas systems in particular can be very costly because more energy needs to be produced to compensate for the loss. Its detecting range reaches from 20 up to 100 kHz. These frequencies are inaudible to human ears, but SONOCHEK can detect them and make them audible and visible, while specifying the leak and evaluating the total amount of loss, all of which can be combined in a full report. An integrated camera and microphone enable the engineer to comment on his findings and refine the final report.

Offering high efficiency, Aldea ALD-EQ-MB-12 series 12 kW Air-to-Water Monoblock Inverter Household Heat Pump , It offers very powerful, quiet, rational and user-friendly heating and cooling solutions. Since all its components are collected in a single body, it does not take up any additional space. Its installation is more practical as it does not require additional copper piping and gas pressure. It provides domestic hot water that you can access whenever you want, regardless of whether it is in heating mode in winter or cooling mode in summer. With its high quality and high efficiency, it offers you the best comfort in the environment where it is used. Optionally, the home heat pump can be connected to an existing radiator installation, underfloor heating installation or fan coils. It is the best natural gas alternative solution with the energy savings it provides. Its advantage compared to natural gas systems is that it provides both heating

PGS is a locking device for pipes made of polycarbonate or polypropylene. It is designed to seal cap nuts to prevent their twisting and disconnection of pipes, as well as the removal of gas meters and installation of bridge cables for bypass devices for the purpose of stealing gas. The pipe locking device consists of two semicircular-shaped parts with additional holes for the sealing rope. To install the pipe locking device, it is necessary to connect both parts on the mounting nut, put the sealing rope into the special holes on the sides of PGS, and install the seal (rotary or latch one). The seal should be placed as close as possible to the locking device. The tamper-evident seal and rope will prevent intruders from keeping the fact of removal of the seal and the locking device from the nut unnoticed. When an attempt is made to perform certain actions with the aim to steal gas or water, visible signs appear on the seal, which is evidence

Repico® is our latest addition to the extensive product range of pipe couplings and repair clamps. AVK’s Repico® product program consists of stainless steel pipe couplings and repair couplings for pipe diameters from DN 15 up to DN 2000. The Repico® range offers a quick and simple connection solution for all pipes with possibility of angular deflection and easy handling due to the compact and light weight design. The Repico® products can be used within the markets: industry, shipbuilding, gas, sewage, water and firefighting. Pipe coupling or repair coupling? The main difference of a Repico® repair clamp compared to a Repico® coupling is that the rubber seal is not one piece and it has no grip rings. The split seal allows the clamp to be put around the pipe but has the same progressive sealing. Repico® pipe couplings (or repair couplings) have several advantages over a traditional connection (repair) methode: A Repico® coupling takes only minutes to install and requires hardly any...

Suitable for large flow rates with low permanent pressure dropSolder (BW) or flanged connection Material: Standard: carbon steel, stainless steel, others according to your application. Fluid: liquid, gas, steam. Diameter of pipes: from 65 to 500 mm.

Suitable for small diameters and / or low permanent pressure dropMaterial: Standard: carbon steel, stainless steel, others according to your application. Fluid: liquid, gas, steam. Diameter of pipes: from 50 to 250 mm.

1.)Gas Tube Manifold made from 0,9mm or 1 mm thickness of galvanized DIN 51-52-53 2.) One end is formed according to drawing above 3.)Other end closed by sheet part spot welded. 4.)100 % tested against gas leakage according to En standards.