Adjustment - machine tools - Import export

Upper run guide for long travels, unsupported in swarf areas Especially in machine tools on long travels, when the energy chain has to be used in a sliding manner, metallic swarf is a problem. guidelok is the cost-effective solution for travels, unsupported up to 50m. The guidelok horizontal is more cost-effective than many steel chains or complex sliding systems. Typical industries and applications: Machine tools, applications in swarf area, anywhere where gliding application is not recommended

100.000 rpm and an elastic spindle support mean you achieve anoptimal surface quality when working on metallic materials. Noise emissions are also low. Thanks to the turbo drive it can be operated without lubrication (oil-free). No chatter marks also with finest deburring jobs. The TVD 3-100/3 ULTRA is distinguished by special hybrid bearings (steel/ceramic), which lead to a significant improvement of the service life in almost all application areas.

The angle head of this machine is very small. Carrying out good work in very inaccessible places is now much easier. Another advantage: the drive is in the angle head. This means that gears are not required, meaning less weight and no wear.

This high-performance grinder is the improved successor of the proven straight grinder SRD 645.Despite the high speed of 45.000 rpm, it consumes just 260 W of power. This design required a further improvement of the ratio of performance to air consumption.The lightweight and ergonomic shape also ensure perfect handling.

This perfectly constructed machine can be also fitted at the front with a pair of high-performance supports instead of a single one and is, therefore, the ideal tool for extreme and long-term use. It is nevertheless light and sits snugly in your hand. Due to the high speed of this grinder it creates a very clean pattern, which makes it ideal for fine grinding, milling and engraving jobs. The following variants of the machine are available: Support: Single or pair Valve: Rotary or lever valve Exhaust air direction: Backwards or forwards

This high-performance grinder is the improved successor of the proven straight grinder SRD 645.Despite the high speed of 45.000 rpm, it consumes just 260 W of power. This design required a further improvement of the ratio of performance to air consumption.The lightweight and ergonomic shape also ensure perfect handling.

The turbo drive means that this machine needs no lubrication either. A brake run provides a high level of safety. A governor valve ensures that the speed remains constant whatever the load and serves to reduce air consumption. An elastic spindle support considerably improves the surface quality and reduces the wear of the milling tool.

This grinder, with its multi-disc motor, has a unique and patented oil-free drive. As with turbo drives, the machine needs no lubrication and is nevertheless slim and handy. It has the same durability of lubricated multi-disc motors. A double row of bearings means that this grinder is even suited to extreme applications. With lever valve.

The angle head of this machine is very small. Carrying out good work in very inaccessible places is now much easier. Another advantage: the drive is in the angle head. This means that gears are not required, meaning less weight and no wear.

The machines are available in short, medium (L100) and long (L200) versions and thus ideal for jobs in hard to reach scopes.

Lightweight, with a proven, low-vibration SRD 355 motor; it ensures high precision and a long operating life. Its lightness and ergonomic form means that you don‘t tire quickly and allows you to carry out delicate deburring. It can be guided like a pencil and is also qualified for fine grinding, milling and engraving operations.

These small-powerful angle grinders have a flat head, robust gears and, with their double bearing sets, are superbly suited to transferring high torque. You have the choice of two tool-receiving sockets: •6 mm collet •M10 mounting thread

Due to its revolution speed and high performance this quality machine can be used diversely, e.g. with a collet for tools of 3–8 mm diameter. A very impressive machine that stands for endurance and strength whilst meeting all ergonomic and weight requirements. A version with a pair of supports for hard applications is also available.

The machines are available in short, medium (L100) and long (L200) versions and thus ideal for jobs in hard to reach scopes.

This grinder, with its multi-disc motor, has a unique and patented oil-free drive. As with turbo drives, the machine needs no lubrication and is nevertheless slim and handy. It has the same durability of lubricated multi-disc motors. A double row of bearings means that this grinder is even suited to extreme applications.

The finish of the angle grinder with elongated neck and a small angle head is particularly suited to working in not easy to reach places with a high degree of precision and performance.Two versions are available: version with 90° head (ZL 90) version with 45° head (ZL 45)

The basic version of this ergonomically precise straight grinder is available in three different types. all have a sound damping exhaust air direction and are also available with a safety lever valve.

This is a powerful 20.000 rpm straight grinder based on the SRD 8-20/2. To overcome the high load it is subjected to, the tool spindle has a double support.

Standard series – this range is the most popular, being used in most applications. This new design of Shrink Disc is made from high alloy forged rings and is practically indestructible. Replacing the smaller 4071 design, these units are available from 14mm to 195mm bore. Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very concentric and well balanced connections that are suited to high speed applications. Traditional shrink fits require complicated calculations, close machining tolerances and fine...

MAXIMUM PERFORMANCE! Compared to vibratory finishing vibrators, Trowal Turbotron centrifugal units offer up to 10 times the grinding power. grinding performance. Turbotron machines are mainly used for the removal of heavy burrs and for edge rounding edges on small and medium-sized mass-produced parts. However, by applying special process techniques, Turbotron machines can also be used for fine grinding and even polishing. even polishing. HOW IT WORKS The rotation of the turntable (60-250 rpm) accelerates the abrasive / workpiece mass and the centrifugal force on the inner wall of the stationary work bowl deflects it upwards. deflected. Due to the onset of gravity, the mass slides back onto the turntable, from where it is accelerated again from there.

Efficient mass finishing for the toughest requirements With a circular vibrator from our CB range, you get a mass finishing machine that works efficiently and achieves perfect processing results. The working channel is helically shaped and allows you to gently process your workpiece whilst ensuring high material abrasion. Gate clearing at the push of a button By pressing a button on the unit, you can quickly reverse the motor's direction of rotation before separating your workpieces from the abrasive media. This ensures that no workpieces or abrasive media are left on the gate that could get trapped between the separator flap and the working channel. Ideally suited for ball polishing and pressure deburring The CB circular vibrators stand out thanks to their robust steel construction and reinforced imbalance drive in the ball polishing configuration. This makes them ideal for ball polishing and pressure deburring with blasting medium.

MV multivibratorsThe finishing touch for complex shapes If you have workpieces with hard-to-process contours that require fine finishing or polishing, the multivibrators of the MV series are the ideal choice. The respective workpiece is secured mechanically or electromagnetically, and processed using vibrating abrasive media and special fluids. This ensures a consistent finish on both the internal and external surfaces. Automated internal finishing on premium parts Our multivibrators each have three high-speed imbalance drives that allow you to vary the position and rotation direction. This enables extremely small vibration amplitudes, ensuring high surface quality for your workpieces – even on difficult-to-reach areas. Delicate bars are protected, the workpiece contours are retained, and even small-diameter boreholes can be processed internally.

A HIGHLY EFFICIENT METHOD WITHOUT THE RISK OF WORK PIECES DAMAGING EACH OTHER Compared to standard mass finishing systems the newly developed M-TMD machine range finish high-value components 10 to 20 times more efficiently! By mounting the work pieces individually to workstations, which are part of a rotating carousel, you can process up to 18 work pieces in one single batch without risking part-on-part impingement. Different workstation angles - relative to their vertical position - allow the individual adaption of the machine parameters to your work pieces and guarantee absolutely stable finishing processes with excellent and repeatable results. APPLICATIONS: Orthopedic implants (medical engineering) Turbine blades (for airplanes as well stationary turbines) Precision components, for example, for pumps and compressors Work pieces made from tungsten carbide and other hard metals Fan wheels for turbo chargers (automotive industry) Sintered components, etc.

PARTS CLEANING FOR REPAIR AND MAINTENANCEImportant components require thorough and regular cleaning and maintenance, especially in industry, mechanical engineering and the automotive sector. Our TRT 83 x 37 cleaning trough removes grease, lubricants and other residues thoroughly and reliably, before the components are reinstalled. WHICH WORKPIECES CAN BE CLEANED? You can use the TRT 83 x 37 cleaning trough to effortlessly clean workpieces measuring up to 80 cm in length and 30 cm in diameter. Here are some examples: Bearing shells and covers Engine components Gearbox components Shafts and axles Labyrinth rings Bearings, bearing units and bearing housings

TT...SM CENTRIFUGAL DISC FINISHING UNITCOMPACT AND PIVOTING Centrifugal disc finishing units from the TT...SM range have an attached screening machine and integrated hopper for abrasive media. After processing the workpieces, the entire unit pivots by 135° to separate the abrasive media and workpiece mass on the screening machine. SUITABLE FOR HIGH-VALUE WORKPIECES While the system pivots back into the working position, the abrasive media are conveyed back into the work bowl. This centrifugal disc finishing unit is particularly well suited to processing high-value workpieces, making it a popular choice in the aerospace industry for example. THE BENEFITS AT A GLANCE Compact design saves space Cost effective Suitable for processing limited quantities

POWERFUL AND EFFICIENTThanks to their "Multivib" drive, the TMV range of trough vibrators ensures intensive workpiece processing throughout the entire bowl length. The extremely powerful drive also makes the machines suitable for ball polishing and pressure deburring. VARIOUS BOWL SIZES The modular series of the TMV range allows you to select the right bowl size for your requirements. This helps you save both costs and energy when processing your workpieces. Bowl widths: 410, 550, 650 and 850 mm Bowl lengths: 1,750, 2,600, 3,450, 4,300, 5,150, 6,000 and 6,850 mm SOUND DEADENING ENSURES LOW NOISE LEVELS Noise levels can be high, especially in a hall. That is why the TMV trough vibrators are fitted with a sound deadening lid, with complete sound deadening housings also available. Larger systems also feature walk-in sound deadening cabins.

OUR ENTRY-LEVEL MODEL – EFFICIENT AND COST EFFECTIVEThe circular vibrators of the CF series are a perfect and simple introduction to mass finishing. The seven different configurations, with a range of different bowl sizes, offer excellent efficiency and maximum cost effectiveness. The CF circular vibrators are easy to operate and can be expanded with accessories for sound deadening or metering, for example. PROCESSING AND SEPARATION – SMOOTH MASS FINISHING The work bowl with an evenly rising floor is perfect for processing your workpieces, as the zero-maintenance vibration flange motor works at two different speeds. The pneumatic separator flap and long separation zone allow you to gently separate your workpieces from the abrasive media. This creates a smooth mass finishing process with excellent results.

EXTREMELY GENTLE PROCESSINGRotating barrels offer a cost-effective and technically ideal solution, particularly when processing small parts in medium batches. This helps you get fine surfaces with neatly rounded workpiece edges, thanks also to the relatively long processing times. Trowal rotating barrels are also excellent for fine finishing and polishing. SOPHISTICATED TECHNOLOGY The barrel body is an octagonal, welded, biconal structure. It generates a triple sliding action in the mass of abrasive media with the workpieces to be processed. The lining consists of tear-proof rubber or PU, with the tight-sealing safety cover made of polyurethane. BARREL BODY WITH LIFTING AND LOWERING DEVICE The automatic lifting and lowering device lets you quickly feed and empty the barrel body. This is a major advantage, especially when processing times are short and when you are operating multiple rotating barrels.

Robust mass finishing machines with separation zone The CD series of circular vibrators are robustly built and stand out thanks to their wide range of potential uses. From polishing and smoothing to deburring, the integrated screening unit helps easily separate workpiece and abrasive media using a manually or pneumatically powered separator flap. The CD circular vibrators are available in configurations from 110 to 1,200 litres of gross volume. Perfect configuration for large workpieces Thanks to the flat bowl bottom and the large opening between the bowl bottom and the separator flap, processing your large and sensitive workpieces is easy. CD circular vibrators also have a large separation zone for simple separation of flat components. The benefits at a glance — Integrated screening unit — Manually or pneumatically powered separator flap — 110 to 1,200 litres gross volume — Flat bowl bottom — Extra-long separation zone