Wheels- castors and rollers - Import export

We manufacture pressure and feed rollers for moulders, feeders and belt sanders according to drawings or samples, completely ready for installation. The choice of roll coating, the design of the roll coating in smooth or grooved form and the most suitable degree of hardness for the roll coating must be determined customer-specifically. Wood-Her rollers consist of an aluminum core. Light-colored rubber is used for the coating, in addition to the polyurethane materials that have long been tried and tested in the woodworking industry, and mainly the elastomer Vulkollan®. The core mounting holes have two side holes.As a service, we offer our customers the opportunity to have their used pressure and feed rollers re-upholstered by us. Our employees will be happy to advise you by telephone or on site regarding high-quality and cost-effective design of pressure and feed rollers.

We manufacture pressure and feed rollers for moulders, feeders and belt sanders according to drawings or samples, completely ready for installation. The choice of roll coating, the design in smooth or grooved form and the most suitable degree of hardness must be determined by the customer. Weinig rollers consist of a core made of aluminum or gray cast iron. In addition to the polyurethane materials that have long been tried and tested in the wood processing industry, the elastomer Vulkollan® is mainly used for the coating. The core mounting holes are designed as a keyway or with three side holes.The Weinig rollers are mainly coated with the elastomer Vulkollan® patented by Bayer. We would be happy to advise you by telephone or at your location regarding high-quality and cost-effective design of pressure and feed rollers.

Due to the ever-increasing level of automation, coated rolls and rollers are now used in almost all production facilities. These rollers and rolls are used in a wide variety of applications (transport, finishing, cleaning, coating, drying, etc.). What is particularly important is the quality of the coating, which determines the service life of the roller and the processing process.We manufacture completely coated rollers, i.e. We provide you with the roller core made of aluminum, steel, etc. and the desired coatings (rubber, Vulkollan®, etc.) from a single source. We can also roughly pre-grind your rollers, finely grind them or even provide them with grooves.As a cost-effective alternative, we also offer you to have your rollers recoated by us. Here too we can choose between different coatings (rubber, Vulkollan®, etc.). According to the customer’s wishes, we can also pre-grind, finely grind or provide these rollers with grooves. We would be pleased to advise you!

With the newly developed FAPI-SWITCH series, we have succeeded in designing deflection pulleys in a lightweight system design with an unprecedented smoothness and smoothness of running that set new standards in the belt grinding process. Due to the flexibility, also with regard to different dimensions, belt elephant machines of all brands can be equipped with these deflection rollers. We would be pleased to advise you on which return pulleys can be used in your processing, in order to achieve top process results.

In our extensive range of steering forks for wheelchairs and other rehab equipment, you will find aluminium or plastic forks in various sizes and designs, with directional locking if required. In addition, we also offer many accessories such as threaded bolts, displacement sets, quick-release axles and eccentric nuts. In addition to our standard range, we also manufacture customised steering forks using our many years of know-how in the industry, not only according to the wishes of our customers, but also in accordance with the latest European norms and quality standards. Do you have any questions about our products or would you like to request a quotation? Just contact us. We have the right steering fork for almost every application!

In our extensive product range you will find high-quality wheels with foamed polyurethane tyres on plastic or sheet steel rims, in various sizes and designs - also ideal for industrial applications. Our PU tyres are made of solid material and are therefore absolutely puncture-proof. Nails, splinters and shards cannot harm the tyre. The wheels offer a high level of driving comfort, even on uneven floor surfaces. Our products are certified and tested according to the latest European norms and quality standards. You can find more information about our products and services in our online catalogues on our homepage. Do you have any questions about our products or would you like to request a quote? Please feel free to contact us. We have the right tyres for almost every application!

Air-filled tyres offer a high level of driving comfort, even on uneven ground surfaces, and are characterised by their low dead weight combined with high load-bearing capacity. Our products are certified and tested according to the latest European norms and quality standards. Would you like to make your pneumatic tyres puncture-proof? No problem for us. With our Rolko-SMART tyre filling made of soft-elastic polyurethane, we make your wheels 100% puncture-proof, with comparable driving characteristics of a pneumatic tyre. You can find more information about our products and services in our catalogues. Do you have any questions about our products or would you like to request a quote? Please feel free to contact us. We have the right tyres for almost every application! Translated with www.DeepL.com/Translator (free version)

In our extensive range of high-quality skate wheels in various sizes and designs, you will also find swivel castors and fixed castors with housings made of galvanised sheet steel - also ideal for industrial applications. Our products are certified and tested according to the latest European norms and quality standards. You can find more information about our products and services in our online catalogues on our homepage. Do you have any questions about our products or would you like to request a quote? Please feel free to contact us. We have the right tyres for almost every application!

We offer high-quality design wheels for sports and children's wheelchairs and other rehabilitation devices for the best driving comfort, combined with an attractive design. In our range you will find modern steering wheels with light aluminum rims or ultra-light carbon rims as well as vulcanised solid rubber tires or shiny polyurethane tyres. We also have skate wheels in various sizes and designs, with integrated LEDs if required. In addition to our standard range, we also manufacture customer-specific wheels with our many years of know-how in the industry, not only according to the wishes of our customers, but also according to the latest European norms and quality standards. Do you have any questions about our products or would you like to request an offer? Just contact us. We have the right wheel for almost every application!

Our flexible ball transfer units provide a simple solution for transporting lightweight to heavy goods along all directions. Our ball transfer units enable you to easily move, rotate and control your conveyed goods. The ball transfer units are constructed so that a very smooth run is possible in all directions, even when moving heavy loads (depending on the version). In a configuration where the ball transfer units are offset from the vertical with overhead mounting, it is possible to achieve a reduction in the load-carrying capacity of up to 50%. Many of our ball transfer units are low-maintenance and feature an oil-soaked felt seal against contamination. Ball transfer units with plastic load balls are excellent for moving loads with delicate surfaces (such as glass, polished aluminum, brass and steel sheet).

Our flexible ball transfer units provide a simple solution for transporting lightweight to heavy goods along all directions. Our ball transfer units enable you to easily move, rotate and control your conveyed goods. The ball transfer units are constructed so that a very smooth run is possible in all directions, even when moving heavy loads (depending on the version). In a configuration where the ball transfer units are offset from the vertical with overhead mounting, it is possible to achieve a reduction in the load-carrying capacity of up to 50%. Many of our ball transfer units are low-maintenance and feature an oil-soaked felt seal against contamination. Ball transfer units with plastic load balls are excellent for moving loads with delicate surfaces (such as glass, polished aluminum, brass and steel sheet).

Our flexible ball transfer units provide a simple solution for transporting lightweight to heavy goods along all directions. Our ball transfer units enable you to easily move, rotate and control your conveyed goods. The ball transfer units are constructed so that a very smooth run is possible in all directions, even when moving heavy loads (depending on the version). In a configuration where the ball transfer units are offset from the vertical with overhead mounting, it is possible to achieve a reduction in the load-carrying capacity of up to 50%. Many of our ball transfer units are low-maintenance and feature an oil-soaked felt seal against contamination. Ball transfer units with plastic load balls are excellent for moving loads with delicate surfaces (such as glass, polished aluminum, brass and steel sheet).

Heavy-duty castors with polyurethane wheel - wheel body made of special grey cast iron with ball bearing - tread made of molded polyurethane, approx. 95° shore A - heavy welded steel construction The strongest Torwegge housing series consist of a welded steel construction for maximum dynamic stresses. The swivel castor housings are equipped with sealed axial rib ball bearing an tapered roller bearing and thus particularly sensitive against surges and beats. The housing head is screwed and secured by a heavy center bolt. The material polyurethane (PU) has a high load capacity with low abrasion. It also features high chemical resistance. These properties make polyurethane suitable for almost any application. In addition, PU offers low rolling resistance.

The choice of the right serrated grinding wheel for grinding knives, scissors, tweezers, pliers, surgical instruments, etc. with the most suitable teeth and the highest quality standards must be determined on a customer-specific basis depending on the intended use. The base body of the serrated grinding wheel is made of aluminum. A coating is applied to the aluminum body, into which the teeth are then inserted depending on the profile shape according to the intended use. With our many years of experience, we would be happy to advise you by telephone or on site regarding a high-quality and cost-effective design of a serrated grinding wheel for your process.

In our product range for wheelchairs and other rehabilitation equipment you will find high-quality spoked wheels with aluminium or plastic rims or polyurethane or pneumatic tyres, if required also with puncture-proof inserts. Of course, we also offer various accessories for spoked wheels such as spoke protectors, also personalised with your company logo on request, drum brakes, hubs, handrims, handrim covers, quick-release axles and adapters. In addition to our standard range, we also manufacture customised spoke wheels using our many years of know-how in the industry, not only according to the wishes of our customers, but also in accordance with the latest European norms and quality standards. Do you have any questions about our products or would you like to request a quotation? Just contact us. We have the right wheel for almost every application!

-Pneumatic tires -steel center rim with ball bearing Air-filled tires made of rubber provide excellent comfort, especially when rolling over uneven floor surfaces. Our pneumatic tires can be customized according to their wheel diameter, profile types, wheel bodies and cover thickness so that they are suitable for a wide range of diff erent applications.

Standard castor with thermoplastic rubber wheel - polypropylene wheel body with ball bearing - grey thermoplastic rubber tread, approx. 85° shore A - with thread guards to protect the ball bearing from dust and dirt - standard steel sheet housing, galvanized Torwegge‘s standard housings are made from deep-drawn, galvanized steel sheet. The solid-riveted, double ball bearing in the slewing ring delivers an advantageous price-performance ratio when used for hand-held logistics applications. Castors in standard housing are commonly used by a variety of sectors in transport racks. They can carry a max. load of 1,200 kg at 4 km/h. Thermoplastic (TPE) has a higher load capacity than rubber. These grey tires minimize the impact on your fl oors, providing a comfortable ride without leaving traces. Some contact discoloration may result from the oil-bearing material when the tires are left motionless for longer periods on sensitive floors.

Standard castor with polyurethane wheel - polyamide 6 wheel body with ball bearing - polyurethane tread, approx. 95° shore A - standard steel sheet housing, galvanized Torwegge‘s standard housings are made from deep-drawn, galvanized steel sheet. The solid-riveted, double ball bearing in the slewing ring delivers an advantageous price-performance ratio when used for hand-held logistics applications. Castors in standard housing are commonly used by a variety of sectors in transport racks. They can carry a max. load of 1,200 kg at 4 km/h. The material polyurethane (PU) has a high load capacity with low abrasion. It also features high chemical resistance. These properties make polyurethane suitable for almost any application.

Smooth running polyurethane castor with polyurethane wheel - polyamide 6 wheel body with ball bearing - polyurethane tread, approx. 95° shore A - with thread guards to protect the ball bearing from dust and dirt - standard steel sheet housing, galvanized Torwegge‘s standard housings are made from deep-drawn, galvanized steel sheet. The solid-riveted, double ball bearing in the slewing ring delivers an advantageous price-performance ratio when used for hand-held logistics applications. Castors in standard housing are commonly used by a variety of sectors in transport racks. They can carry a max. load of 1,200 kg at 4 km/h. The material polyurethane (PU) has a high load capacity with low abrasion. It also features high chemical resistance. These properties make polyurethane suitable for almost any application.

Standard castor with elastic rubber wheel - wheel body made of plastic with roller bearing - tread made of elastic solid rubber, approx 65° shore A - standard steel sheet housing, galvanized Torwegge‘s standard housings are made from deep-drawn, galvanized steel sheet. The solid-riveted, double ball bearing in the slewing ring delivers an advantageous price-performance ratio when used for hand-held logistics applications. Castors in standard housing are commonly used by a variety of sectors in transport racks. They can carry a max. load of 1,200 kg at 4 km/h. The material solid rubber is especially suitable for uneven and hard fl oors because of the soft and elastic tread. Our solid rubber wheels are available with diff erent shore hardness, tires, wheel center and bearings.

Heavy-duty double castor with polyurethane wheel - wheel body made of special grey cast iron with ball bearing - tread made of molded polyurethane, approx. 95° shore A - heavy welded steel construction The strongest Torwegge housing series consist of a welded steel construction for maximum dynamic stresses. The swivel castor housings are equipped with sealed axial rib ball bearing an tapered roller bearing and thus particularly sensitive against surges and beats. The housing head is screwed and secured by a heavy center bolt. The material polyurethane (PU) has a high load capacity with low abrasion. It also features high chemical resistance. These properties make polyurethane suitable for almost any application. In addition, PU offers low rolling resistance.

Elastic rubber : - wheel body made of plastic with roller bearing - tread made or elastic solid rubber, approx 65° shore A, - blue or grey wheel color - runs quietly, non-marking - absorbs vibration The material solid rubber is especially suitable for uneven and hard fl oors because of the soft and elastic tread. Our elastic solid rubber wheels are available with different wheel center and bearings.

We carry various PVC hoses, silicone-free, various Shore hardnesses and winding strengths. You will receive yard ware or lengths on request from us. We would be pleased to mount the hoses on the corresponding product. Antistatic versions are also available. Hoses sample (more hoses for tube-ø: 20-108 mm on stock) PVC 54x2 PVC hose (silicone-free) For tube ø: 60 mm Shore hardness: approx. 58° (+/- 3 Shore) Colour: light grey PVC 45x2 PVC hose (silicone-free) For tube ø: 50 mm Shore hardness: approx. 58° (+/- 3 Shore) Colour: light grey

ROS heavy load rollers with external bearings are used for conveying both unit loads and bulk material at medium to high loading levels. In addition to the driven version, diverse options are available for combining the individual components, depending on the specific requirement.

In addition to precision deep groove ball bearings, ROS also employs self-aligning ball bearings and spherical roller bearings for its heavy load rollers with internal bearings. In addition to a selection of different tube and shaft designs, powered rollers are also available for use.

In addition to precision deep groove ball bearings, ROS also employs self-aligning ball bearings and spherical roller bearings for its heavy load rollers with internal bearings. In addition to a selection of different tube and shaft designs, powered rollers are also available for use.

ROS heavy load rollers with external bearings are used for conveying both unit loads and bulk material at medium to high loading levels. In addition to the driven version, diverse options are available for combining the individual components, depending on the specific requirement.