Control boxes - electric - Import export

the economical alternative Replacement for STRATE 1DF2 and 2DF2 pump controllers suitable for connection to all STRATE fill level recording systems: contact-based or contactless the 2DF2 plus also handles dual level measurement: Sensor/pilot tube and sensor/contactor for outstanding operational reliability the current level and operating hours are always shown on the display

2DFmaster AWAcontrol control system for STRATE sewage pumping stations with two pumps each and an installed overall motor rating of 0.75 kW to 75 kW each. Particularly suitable for building services engineering and municipal applications (twin systems), offers outstanding ease of use and functionality of the AWAmaster technology also for pumping capacities over 4 kW. LCD plain text display Thermal and electrical motor monitoring Manual – 0 – Automatic functions Pump switch-off through switch-off point with run-on time Acknowledgement button Electronic monitoring of the motor current Forced switch-on, switchover and alternation of pumps Internal acoustic alarm Collective fault message potential-free and potential-bound Backwater alarm potential-free All settings and fault messages retained after power failure Operating hours counter High resistance to interference Simple operation Level recorded either by internal pressure transducer, external 4 – 20 mA probe or float switch

Compact control systems with micro-processor technology for controlling STRATE sewage pumping stations with two pumps each and an installed motor rating of up to 5,5 kW per pump. Particularly suitable for building services engineering (twin systems) and do not require a separate control cabinet. Compact control system AWAmaster 2 in plastic housing Ready for connection with 1.5 m cable and CEE plug 16 A, 5-pole Parallel operation of both pumps to cope with increased sewage volume (e.g. during heavy rain) LCD plain text display Thermal and electrical monitoring of the motors Manual – 0 – Automatic functions Pump switch-off through switch-off point with run-on time Acknowledgement button Electronic monitoring of the motor current Forced switch-on, switchover and alternation of pumps Variable graduated start-up (switch-on delay) Internal acoustic alarm Collective fault message potential-free and potential-bound Backwater alarm potential-free

The compact control system with micro-processor technology for controlling STRATE sewage pumping stations with one pump and an installed motor rating of up to 5,5 kW. Particularly suitable for building services engineering (single systems) and do not require a separate control cabinet. Compact control system AWAmaster 1 in plastic housing Ready for connection with 1.5 m cable and CEE plug 16 A, 5-pole LCD plain text display Thermal and electrical monitoring of the motor Manual – 0 – Automatic function Pump switch-off through time or switch-off point Acknowledgement button Operating hours counter Ammeter Electronic monitoring of the motor current Forced pump switch-on Variable graduated start-up (switch-on delay) Internal acoustic alarm Collective fault message potential-free and potential-bound Flood alarm potential-free All settings and fault messages retained after power failure (battery back-up not required) Reserve inputs for float switch, telecontrol module

CSN® EXPLOSIONPROOF SPACE HEATERS CSN® explosionproof space heaters are used for heating zone 1 and 2 hazardous areas. Standard devices are available in the common temperature classes T1 to T4; temperature classes T5 and T6 can be offered on request. The use of finned tubes for the CSN® explosionproof space heaters is the most economical solution for heat transfer in the field of electric heaters. By coiling corrugated helical fins on tubes of different alloys, we obtain extremely large tubes surfaces and, consequently, low temperatures on their surfaces. We use this interaction to produce explosionproof space heaters on a highquality level. CSN® explosionproof space heaters with coiled fins are intended for horizontal mounting and suitable for both wall and floor mounting (for permanent installation)

The PFLITSCH CABseal is used to feed pre-assembled and non-assembled cables, as well as pneumatic and hydraulic lines, simply and reliably into control cabinets, primarily, but also into enclosures and machines. To this end, their sizes and dimensions of the frames are compatible with the common standard cut-outs and hole patterns in control cabinets so that just a single CABseal frame is required per cut-out. The CABseal cable entry system consists of four different sized frames and a number of cable grommets that can be equipped in various constellations. The grommets are slotted at the sides to make it easier to insert cables. While the frame is made of hard and robust polyamide, we use a flexible elastomer for the cable grommets and their special sealing lips. To ensure the cables are properly sealed, the grommets are positioned in the frame and compressed when the upper part of the frame is screwed down.

The aluminum enclosure Type CA from Bernstein is corrosion resistant, impact resistant and has a high mechanical strength due to which it is ideal for the encapsulation of electrical, electronic, pneumatic components and applications that are used in potentially explosive environments. The CA enclosures feature copper-plated earthing screws for connecting PE conductors on body and cover, and are finished in RAL 7001 in a silver/gray shade. Earthing sockets and mounting flanges can be utilized for mounting as well as for securing the built-in components. These come with factory-assembled seals that confer class IP 65 (optionally IP 67) protection according to DIN EN 60529.

Bernstein Series CP and CPS polyester enclosures are made of high-grade glass fiber-reinforced polyester. The black polyester enclosures conform to the requirements for Ex applications and are sufficient for accepting and encapsulating electrical and electronic and control components in harsh environments or implicitly explosive atmospheres. All enclosures have achieved protection class IP 66 in accordance with DIN EN 60529. The captive stainless steel cover screws are maintained by a self-latching element integrated into the cover. The threaded bushes are embedded in the flange on the narrow sides of the base and obtain mounting rails, plates and PC boards.

This product is made of high-grade polycarbonate or ABS and are typically designed for enclosing electrical and electronic components and even complete small-scale controllers. The BERNSTEIN Series CT plastic enclosers all comes with a transparent polycarbonate cover and follows protection class IP 65 of DIN EN 60529. Also provided are attachment bosses on the enclosures' base to built-in components mounting. Components can be easily secured using self-tapping mounting screws. These plastic enclosures allows various direct mounting options because attachment bosses' location and installation of mounting rails is possible. The BERNSTEIN Series CT enclosures are manufactured with the BERNSTEIN developed and patented quick-release fastener.

INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 800Flexible all-rounder with 86 kg / 24h dehumidification performance for a variety of industrial fields of application Keeping humidity perfectly under control The maintenance-friendly desiccant dehumidifier TTR 800 not only guarantees high dehumidification levels even at very low dew points – with its stainless steel housing and an electrical control box in IP53 design, the corrosion-resistant TTR 800 even withstands adverse operational environments and is therefore ideally suited for a variety of dry keeping tasks or the production of dry air in the chemical, pharmaceutical and food industry as well as in the sector of mechanical engineering, but also to protect machines, inventory and buildings from corrosion, condensation and mould formation, for example in water processing facilities or electrical control centres. High Performance made in Germany

WIWOX® VIVERK are single and multi-stage spray chamber cleaning systems for aqueous cleaning, pretreatment and degreasing of tools and parts. Loading takes place via an extendable platform, which can be loaded at an ergonomic working height. The workpieces are mechanically cleaned by means of pump pressure in the spray chamber process. The temperature-controlled washing liquid is sprayed onto the workpiece via a spray frame.The washing plant is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

Single and multi-stage spray chamber washing systems for industrial cleaning and degreasing of tools and parts. Loading takes place via an extendable loading platform at ergonomic working height. Before cleaning, the loading basket is loaded and moved into the rinsing chamber. The individual stainless steel washing nozzles can be easily maintained and adjusted according to the application. The motor-driven spraying rotor completely revolves around the loaded parts. The washing system is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

As a manufacturer of control cabinets, we are always at your side. We process standard cabinets as well as special designs for our customers. We take care of construction and wiring plans directly according to customer specifications, as well as the mechanical processing, the construction and the wiring of the control cabinets. After the actual construction, we also carry out an electrical test and insulation tests. Upon delivery, you will receive the customer-specific labels and accompanying documents. Your advantages with A + B Electronic -Switch cabinets directly according to your specifications -We are not just a service provider, but a technology partner: A + B Electronic thinks your project with you and together we can bring it to series production successfully