Electromagnetic equipment - Import export

— Degaussing of pipes and metal sheets — Automatic degaussing before welding — Dependable degaussing for better welding results through stable welding process without magnetic deflection, minimisation of finishing work — activgauss (10–250 A) – degaussing during welding: — Avoids moving up of magnetic field during the welding process in case of very long and strongly magnetised components — Portable and robust — Quick connection at the pipe by means of three load cables — Use at -25 °C to +40 °C with mains voltage tolerances of +/- 20% Advantages of degaussing: — No deflection of the arc by residual magnetism in the workpiece — Prevention of lack of fusion due to insufficient sidewall fusion — Minimisation of finishing work — Cost-efficient and high-quality results — Set: Degauss 600 degaussing machine, two 5-metre, 35 mm² load cables, one 20-metre, 35 mm² load cable, RT DGS1 remote control and 5-m connection cable

• from high quality plastics • for all common spirits • for 0,7 - 1,0l bottles • not anise-resistant • Note: measure pourers only function flawlessly with unsweetened spirits

USED FOR HANDLING OF - scrap - turnings - burden, metal charge. 75% Duty cycle / Rugged cast case / Special coil design / Heat insulation gasket / Heavy-duty steel bottom plate / High-quality sealing compound. Compatible equipment: Sennebogen, Fuchs, Liebherr, Caterpillar, Hitachi, Volvo etc. Excusive one year replacement warranty

USED FOR HANDLING OF sheet steel in packs or single / slabs. Electro-permanent magnets; current is supplied to the coil only to activate or deactivate the magnet / a magnetized load may be held by the electromagnet as long as required / energy efficiency / high safety level / ease-of-operation / high level of operating efficiency

USED FOR HANDLING OF large diameter pipes. Specially designed for large diameter pipe lifting / copper coil as an option / hot material handling up to 650°C as an option

USED FOR HANDLING OF Sheet steel in coils / Sheet steel in coils, lifting from the lateral and end sides / -Rolled wire coils, rebar coils, from the end side Heat-resistant version (cargo temperature up to 650° degrees C). Aluminium coil

USED FOR HANDLING OF - bundles of coil, rod, rebar / rod and rebar in bundles. Specially designed for long-length cargo / copper coil as an option / hot material handling up to 650 C° as an option.

Electromagnets for slabs, sheet steel in packs or single pieces, rectangular metal blanks, tubes in packs.High reliability and durability of the winding / Stability of lifting parameters in the operating process / Special design is available for operation in underwater conditions / Heat-resistant version (cargo temperature up to 650°C). Compatible equipment: Cranes / Spreader beams. Aluminium coil

Transported cargo: Slabs / Forgings / Heavy-weight metal blanks. Compatible equipment: Cranes / Spreader beams. Energy saving as per ton of the transported cargo / Heat-resistant version (cargo temperature up to 650°C) / Aluminium coil