Hydraulics - Import export

Typical areas of use for hydraulic gas spring are controlled opening and closing of hatches and hoods. The gas springs can also be adapted to control complete equipment such as ventilation apertures, chairs, beds, windows, tools and machinery.

Lift castor system for a fast and flexible placing of plant and machinery or assembly tables; gear transmission ratio: 10:1 Max. Load: 500 kg per lifting unit Material: Housing: Die-cast aluminum with PTFE bearing Roller: Plastics PA with ball bearing Roller housing: Zinc plated steel Set: 4 lifting units 1 hydraulic drive unit 4 hydraulic pipes at each 3 m, pre-filled Extras: Other sets on request

— Whitworth pipe thread DIN ISO 228- chambered O-ring — Seals FPM — Material AISI 316L (1.4404) — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 232 psi (-0.95 to 16 bar) — Not designed for steady motion of the tube

— Whitworth pipe thread DIN ISO 228 — chambered O-ring — Seals FPM — Material AISI 316L (1.4404) — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 232 psi (-0.95 to 16 bar) — Not designed for steady motion of the tube

- Metric thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FKM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 psi (-0.95 to 16 bar) - cooling water, air, vacuum - Stiff angular shape, can be locked with jam nut

Application The portable HD 2500 is designed for delivering high hydraulic pressure up to 2500 bar required for operating hydraulic tools, especially hydraulic tools for loosening and tightening the clamping connections provided at large diesel engines. Capacity hydraulic pressure up to 2500 bar. Drive medium Compressed air with at least 6 bar. Features The hydraulic pressure is adjustable up to 1500 bar. Up to four hydraulic tools can be supplied simultaneously.

Application The portable HD 1500 is designed for delivering high hydraulic pressure up to 1500 bar required for operating hydraulic tools, especially hydraulic tools for loosening and tightening the clamping connections provided at large diesel engines. Capacity hydraulic pressure up to 1500 bar. Drive medium Compressed air with at least 6 bar. Features The hydraulic pressure is adjustable up to 1500 bar. Up to four hydraulic tools can be supplied simultaneously.

The PTS2 series is designed for prototype production, die set-up and modification work (including drawing, bending and punching tasks). The DSP series is especially suitable for die spotting. The mechanical micro inching system provides an accuracy of 0,05 mm. Overview: ● Press capacity: 300-20,000 kN ● Application: die testing tryout and production start-up

The high-speed servo-hydraulic control of the mill screwdown closes the loop: The thickness values measured precise to the micrometre form the basis for quick and precise control. Vollmer offers solutions for all control concepts from simple feedback control through to complete mass flow control or Direct gap contol for rolling of wedge-shaped strip and in tandem mills. Vollmer supplies the complete control system – from the sensors through the control technology right up to the hydraulics and the cylinder – from a single source. For our customers that means having just one contact partner – in short: A one-stop solution.

Specifications/Approvals: High-performance HLP hydraulic oils in accordance with DIN 51524-2 with very good oxidation and wear protection, excellent air and water separation properties and low tendency to foam.

can no longer be sold, has expired for 6 years ; Dispose of according to Castrol Specifications/Approvals: High-performance HLP hydraulic oils in accordance with DIN 51524-2 with very good oxidation and wear protection, excellent air and water separation properties and low tendency to foam.

This design by LEBENDämpfungstechnik GmbH acts as a hydraulic shock absorber in both, pulling and pushing direction. The energy dissipation of this kind of industrial shock absorber is performed in two ways Working principle As a purely hydraulic variant (TwinStroke®) – in push (compression) direction hydraulically reversible by means of damping medium – in pull (tension) direction hydraulically reversible by means of damping medium The TwinStroke® dampens push and pull forces without an additional functional element. A piston system transmits the push and pull forces gashydraulically to different gas and oil chambers. In this way, any load can be absorbed immediately without idle stroke, socalled “slack”, and with minimal wear. The TwinStroke® can absorb changing loads very well. The smaller size and lower weight is advantageous, as only one element is needed to absorb compression and tension forces.

The hydraulic industrial shock absorber of the C-series (COMPENSER®) is the ideal hydraulic buffer for storage and retrieval machines or smaller conveyor systems, crane systems, test stands etc. in light to medium mechanical engineering. Due to its short design, this hydraulic buffer (COMPENSER®) can be used in a spacesaving manner as limitation of the end position (as emergency end stop) in industrial applications. In addition, the low reset force allow operational pushin cycles at creep speed. Design & Function: The piston rod 2 enters the metering tube 3. The damping medium flows from the pressure chamber 6 through the throttle orifices 4 of the metering tube 3 into the volume balance chamber 5. The nitrogen gas between the outer tube 7 and the metering tube 3 is compressed and stores the energy required for the reset of the piston rod. When the piston rod 2 returns to the initial position, the damping medium flows back into the pressure chamber 6.

Hydraulic jacks have been widely used in all kinds of industries and jobs to do all the heavy liftings for us. They come in many shapes, mechanisms and capacities. Ronix RH-4923 Hydraulic Long Floor Jack is one of the most popular ones among mechanics and garage owners. This amazing piece of tool has a capacity of 3Ton which is considered to be the most commonly used by repair shops to lift cars. For more information about this long floor hydraulic jack, scroll down to detailed description.

Industrial hydraulics are an essential part of numerous industrial applications and play a crucial role in controlling machines and systems. At AIS Hensch Automation-Industry-Solution, we offer a comprehensive selection of high-quality industrial hydraulic components and systems designed for reliability, efficiency and performance. Precise Control and Performance: Our industrial hydraulic solutions provide precise control and performance for various applications, be it manufacturing, mining, construction or other industrial areas. By using high-quality components and state-of-the-art technologies, we ensure reliable and efficient performance. Versatility and adaptability: Our range includes a wide range of industrial hydraulic components, including hydraulic cylinders, valves, pumps, motors, hoses and much more. These components are suitable for a wide variety of applications and can be flexibly adapted to the specific requirements of our customers.

We install the necessary hoses between hydraulic power units and press cylinders. We also create piping and circuits for thermal oils and cooling water.

Hydraulic steering for wheel loaders - scope of delivery 1 piece as shown

Hydraulic embankment bucket swiveling width 60cm for the CT mini excavator embankment bucket hydr. swiveling 600mm for mini excavators for the models mini excavator CT-10E mini excavator CT-12E mini excavator CT-15-SE mini excavator CT-15-A PRO mini excavator CT-18E short tail mini excavator CT-27E envelope circle excavator mini excavator FERRUM DK24 Of course with connection for quick coupler Other attachments can be found on request or in our “ Attachments ” category.

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Valve screw mechanical accessories.

Specifications/Approvals: Zinc-free hydraulic oils type HLP-D based on DIN 51524-2 (with the exception of demulsifying properties) with very effective detergent/dispersing properties and wear protection. Use, for example, in machine tools and hydraulics where there is possible access to water.

Assembly immediately upon receipt of order - generally in stock Umbausatz Hydroaggregat Mit diesem Umbausatz kann die Hydraulikpresse S 2.1M Ecoline wie gewohnt mit der Handpumpe oder mit dem ... Category Hydraulic hoses and fittings / Machines and tools / Hose press / Hydraulic unit Product number supplier 43381008

Female couplings with hose stem With one handle material: modular graphite cast iron/steel, galvanized Category Low pressure hoses and fittings / Mortar couplings and accessories / Sockets / With hose sleeve 1-lever / Binding hydraulic Product number supplier 332014221

Female couplings with hose stem With one handle material: modular graphite cast iron/steel, galvanized Category Low pressure hoses and fittings / Mortar couplings and accessories / Sockets / With hose sleeve 1-lever / Binding hydraulic Product number supplier 332014221

Hydraulic Saws