Oils and fats - Import export

iglidur® F: Lightning arrester Extreme stiffening and hardening, besides being highly electrically conductive iglidur® F bearings can be used in dry operation only conditionally, but display full mechanical potentials with oil and fat lubrication. iglidur® F is available as cylindrical bearings and plain bearings with flange. Electrically conducting High compressive strength Good temperature resistance high pv-value Good chemical resistance

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Polysorb Disk springs delivery program De [mm]: Di [mm]: disc springs are annulus discs stressable in the axial direction, which are turned over in the shape of a disc in the axial direction. disc springs provide a more favorable space usage than other spring types. They are particularly suitable for designs that demand a small spring deflection. + When not to use Polysorb Disk springs? For the implementation of specially flat load deflection curves that are possible with metal only with considerable complexity and expenditure (slotted versions). For compensation of axial clearance and manufacturing tolerances For vibration compensation For noise dampening When an antimagnetic material is required For electrical and thermal insulation When no corrosion problems should arise When lubrication is not necessary For low weight For low space requirement – When not to use polyserb disk springs? When constant spring forces are necessary over a wide temperature range When high spring forces are required The spring deflection of the disk spring is relatively small. Therefore a number of disk springs are combined in practice. Alternatively layered disk springs enhance the spring deflection in proportion to the number, whereby the overall spring force is as large as the force of the individual disk spring. To increase the force, the disk springs can be layered in parallel as a spring packet. Chemical resistance Polysorb disk springs are resistant to many chemicals. iglidur® A500 has a higher resistance than iglidur® J. Medium Resistance iglidur® J iglidur® A500 Alcohols + + Hydrocarbons + + Fats, oils without additives + + Fuels + + Diluted acids 0 to - + Strong acids - + Diluted bases + + Strong bases + to 0 + Humidity absorption The low humidity absorption allows them to be used in wet or humid environment. Polysorb® disk springs absorb humidity. Thereby their mechanical properties alter. In the worst application that can be thought of - extremely long application in water - Polysorb® disk springs still exhibit high spring force. iglidur® Standard environment saturated in water J 18 15 A500 24 23 Increased operating temperature Increased temperatures lead to the decline of stiffening in polymers. Polysorb® disk springs exhibit a maximum spring force of 8 N even at the maximum permitted temperature of 80° C. See figure for relationship of spring force to ambient temperature. Polysorb Disk springs long-term tests X = downward deflection [%] Y= spring force [N] A = JTEM-10 B = A500TEM-10 Figure 35.1: Spring force depending on the percentage of deflection measured in installation size 10 X= Ambient temperature [°C] Y= Maximum spring force [N] Figure 35.2: Influence of the ambient temperature on the spring force, measured on JTEM-10 Polysorb Disk springs delivery program De [mm]: Di [mm]: Dimensions according to DIN 2093

DryLin® telescopic rails Total extensions Partial extensions Over-extensions DryLin® telescopic rails DryLin® telescopic rails with locking function Detent in start, medium and end position Freely selectable locking position DryLin® telescope - wth locking mechanism Completely lubricant-free linear extensions in continuous stroke lengths of 100mm to 600mm - maximum pulled-out length: 1200mm. The telescopic systems consist of anodized aluminum guide rails and a gliding block made of the proven iglidur material. By the incompounded solid lubricants, iglidur tribopolymers enable dry operation in every application. The advantage - besides being maintenance-free - is the carefree use in clean hygienic environments. No oil or fat can be transmitted to other products, clothing or people. Applications even in cleanroom air showers were already implemented. But the dry operation also has advantages in the dirt accumulation area. Dirt particles do not stick to the guide and do not become a sticky mass. As an option, all telescopic guides can be delivered with a detent in start-medium-end position. Requirements for individually positioned locking positions can be met. Detailed view: DryLin® telescopic rail in a guard door adjustment. DryLin® telescopic rails Total extensions Partial extensions Over-extensions DryLin® telescopic rails DryLin® telescopic rails with locking function Detent in start, medium and end position Freely selectable locking position DryLin® telescope - wth locking mechanism

We offer active ingredients In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

We offer pharmaceutical white oils In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

We offer technical white oils In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

We offer tall oil rosin In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

Spiral rings are mounted on standard rollers and used to clean conveyor belts. When the idler roller rotates, the spiral rings move the dirt from the center of the belt outwards through a tumbling motion. The spiral rings (rubber rings) from FTK Förderband Technik Kilian GmbH are permanently fixed on the conveyor roller and are characterized by their abrasion resistant quality. In addition to the tried and tested standard, we also manufacture rings in special quality, e.g. B. white food quality, oil and fat resistant or for the extreme temperature range ( 40 ° C to 180 ° C).

Support disks on idlers bridge larger distances to the conveyor belt. They support the belt and are preferably used in sidewall belts or profiled conveyor belts. The support disks (rubber rings) from FTK Förderband Technik Kilian GmbH are permanently fixed on the conveyor roller and are characterized by their abrasion resistant quality. In addition to the tried and tested standard, we also manufacture rings in special quality, e.g. B. white food quality, oil and fat resistant or for the extreme temperature range ( 40 ° C to 180 ° C).

Buffer rings absorb the falling energy of the conveyed goods and thus protect the belt from damage. The buffer rings (rubber rings) from FTK Förderband Technik Kilian GmbH are permanently attached to the conveyor roller and are characterized by their wear resistant quality. In addition to the tried and tested standard, we also manufacture rings in special quality, e.g. B. white food quality, oil and fat resistant or for the extreme temperature range ( 40 ° C to 180 ° C).

Constructed according to your application Constructions from 2 ways up to 14 ways All ports are noninteracting and every one comes with its own leakage connection. This makes external surveillance of each port possible Media: air, water, oil, fat, emulsions Sensor technology optional

The Flottweg Z8E: The Giant Decanter With the new Z8E decanter centrifuge, Flottweg is extending its product range and setting new standards. Right from the start of development of the Z8E, the target was set of concentrating on the specific requirements of an extremely wide range of industries. The modular design of this decanter centrifuge means it is possible to adjust optimally to all kinds of separating tasks. Irrespective of whether two-phase or three-phase separation is involved, Flottweg always has the right machine configuration available with the Z8E decanter centrifuge. Typical Applications of The Flottweg Z8E - Mining and the processing industry - Chemicals and biotechnology - Foodstuffs and beverage industry - Vegetable oils, animal fat and renewable fuels - Wastewater and oil sludges

"Origin and history of coconut oil Extra virgin coconut oil has a fatty structure. Comparing organic coconut oil with another natural product is almost impossible. Sometimes the smell is artificially (and chemically) imitated, but nothing beats the original. Production Process, Harvest and Processing Coconut Oil The cold pressed coconut oil is extracted directly from the nut. Coconut oil has a white colour and a rather mysterious smell. Healthy properties Coconut oil and applications Coconut oil extra virgin is particularly popular and that has obvious reasons. In a short time, extra virgin coconut oil has worked its way up to become one of the most popular oils in the world. Coconut oil organic can be used in countless ways: processed in dishes, or for example as a wonderfully relaxing massage oil. The fat of coconut oil has a completely different structure and composition than the fat you find in frying snacks or in dairy products and meat. Co…"

The universal hose to handle fatty (especially animal and vegetable fats/oils) and non-fat foods. Also for conveying alcoholic and non-alcoholic beverages and fruit juices. Construction: Light-coloured NBR tube Tension and pressure-resistant fabric inlays Concealed steel spiral Blue abrasion-resistant, weather-resistant Optional: black, light or red cover Optional: Embedded copper wire Interior smooth, exterior fabric patterned Suitable for CIP and conventional cleaning, brief steam cleaning up to 130°C All food qualities used by SIMON meet the current requirements of the German Institute for Consumer health Protection and Veterinary Medicine (BfR) and the US Food & Drug Administration (FDA). Supplied by the roll or cut to length. Also available without spiral or in reinforced version to transport abrasive foodstuffs. SIMON food quality hoses are available with built in fittings using the SIMON – Vulkofix method on request. Other versions and dimensions on request.

Rollers with a diameter of less than 75 mm are called contact rollers. They are equipped with a metal core flush on both sides and either covered with para rubber or Vulkollan®. The hardness of the coating is usually approx. 60º Shore, but other hardnesses are also possible. The coating of the contact rollers can, for example, be provided with grooves on request. Advantages Advantages of contact rollers FAPI-PA that have these coatings are: Wear resistance Oil resistance Fat resistance Emulsion resistance Ball bearings can also be easily integrated into the metal core from a roll width of 20 mm. Due to these outstanding flexible properties, Picard’s FAPI-PA contact rollers have proven themselves on the market for decades. Vulkollan® = registered trademark of the Covestro Group We will be happy to advise you in order to find a suitable contact role for you.

The INOX® Workshop Cleaner WS is a powerful universal cleaner, for all soiling in the workshop area. The cleaner is ideal for the removal of oil, grease and fat contamination, as well as for many other types of contamination. Due to its versatility, the cleaner concentrate can be used manually, mechanically and in HD equipment. The INOX Workshop Cleaner WS is biodegradable and does not attack rubber or plastic due to its material-friendly composition.

"What is Maltodextrin? Maltodextrin is a polysaccharide (carbohydrate) that has the unique ability to bind fats and oils. It is used to improve the texture of food and drinks. Maltodextrin is also used as a powdered dietary supplement by athletes. DE-qualification Maltodextrins are classified according to their Dextrose Equivalent (DE) and can have a DE value between 3 and 20. The higher the DE value, the shorter the glucose chains and thus the sweeter the maltodextrin. Maltodextrins with a DE value up to and including 10 are considered to be non-sweet. Above the DE value of 20 it is so sweet that it may no longer be called maltodextrin. Then it is called glucose syrup. Maltodextrin DE-10 of Tapioca starch This maltodextrin is made from Tapioca starch. The starch is hydrolyzed with natural enzymes (GMO free) and then dried by a spray process. The powder is white, has a neutral taste and can in diluted form improve the viscosity of products."

In many aspects of process engineering, separators are used for mechanical separation and clarification of mixtures comprising solids and liquids. A separator is liquid-oriented and works with a higher rotation speed than a decanter. As a result, the generated centrifugal acceleration (g number) of a separator is significantly more powerful than in decanter centrifuges. Flottweg separators are suitable for separating ultrafine solid particles from a liquid (clarifier separator). Furthermore, Flottweg separators are suitable for separating mixtures of liquids with different densities at the same time as separating a solid (purifier). Flottweg AC separators (Automatic Cleaning) can be used in a wide range of applications, and are also available in various configurations. — Beverage and brewing industry — Starch industry — Chemicals and biotechnology — Extracting and processing fats and oils

Lotions are emulsions or suspensions based on water or alcohol. Unlike creams, lotions contain oil instead of fat, are therefore more fluid than creams and easier to apply to the skin. Usually, lotions contain little or no alcohol, which makes them attractive even for sensitive skin. Lotions are used to treat, care for or cleanse the skin. They contain light care substances such as almond oil, aloe vera, herbal or fruit extracts which make the skin soft and smooth. The advantage of a lotion over a cream is that the skin can still breathe when applying the lotion. Lotions are available in a variety of versions for all skin types and areas. The WFS will be happy to work with you to develop the right lotion according to your ideas.

The INOX® mineral spirits IX 200 effortlessly removes all types of dirt such as fats, oils and paint stains. The mineral spirits can be used on almost all surfaces, textiles, work equipment and many other areas of application. The INOX® mineral spirits IX 200 leaves no traces after use.

Precise atomisation and spraying can be continuous or selective. The revolutionary combination of continuous flask and low-flow spray chamber guarantees perfect spraying of low to highly viscous media with high edge sharpness and minimum overspray. Fields of activity: - Dosing - Coating - Microsputtering - Lubrication - Marking and much more. Materials: - Fats/oils - Colours - Activators/primers - Abrasive materials - Adhesives - Silicones - Solid-laden materials and much more. Advantages: - Constant quantity/area - Uniform spray pattern - Uniform coating - Little overspray/high edge sharpness - Defined volume per revolution - High chemical resistance - High spread - Adjustable round jet - From dot spraying to continuous spraying - Low-maintenance system - flow rate of the medium and atomising air can be regulated independently - High application efficiency

The Flottweg Tricanter® For Three-Phase Separation In three-phase separation, it is possible to separated two liquid phases from one solid phase at the same time. The Flottweg Tricanter® is the perfect partner for separating these three phases. Tricanter® - Typical Applications For Three-Phase Separation - Processing of sludges containing oil from refineries, oil ponds, etc. - Extracting animal/vegetable fats and oils - Starch manufacture for separating wheat starch and gluten Tricanter® - Advantages And Customer Benefits - Greatest possible purity of the liquids to be separated, by using the impeller - Other processing steps/separating stages can be dispensed with, or are no longer required, thereby offering cost savings for the plant owner - Adaptation to changing conditions (product in the feed) possible at any time - Automation is possible - Produced, manufactured and developed in Germany, for the highest possible production quality

Refined Canola Oil

Beef tallow Seal Oil Mutton Fat oil Lard Goose fat Fish oil Duck fat Cod Liver oil chicken fat

Wholesale Cheap waste/Used Engine oil for Sale

Factory Price Refined Sunflower oil /ISO/HALAL/HACCP Approved & Certified.

100% Refined 5L Cooking Oil Sunflower Oil For Food.

Increases the cleaning performance of your pressure washer. It dissolves oils, fats and mineral dirt. Suitable for cold and hot water. Other sizes available on request