Oxygen sensor - Import export

The Oxyfire™ in-situ oxygen sensor measures oxygen concentrations directly in the "high heat" zones of high temperature furnaces, boilers and incinerators. They are intrinsically safe, requiring no electrical input power, and generating only a low millivolt output. FEATURES • Available in a number of standard lengths up to 48" (1200 mm) • Field performance can be easily verified using integral verification gas port • Intrinsically Safe per EN50 014 (1977) clause 1.3 • Temperature Range: 1000°F (min) to 3000°F (max) / 538°C (min) to 1649°C (max) • Robust design eliminates "auxiliary sheaths" required on lower quality products • Single side connections ensure cables are safely away from the hot furnace wall • Proven track record: used in more furnaces, boilers and incinerators than all other high-temp probes combined • No drift or accuracy problems common to "side hole" probes • High quality construction eliminates the need for cooling air • Proprietary installation configuration...

The AtmoProbe™ is an industrial atmosphere sensor that provides extremely accurate and repeatable measurements, and may be used in a variety of atmosphere measurement applications. The proprietary design of the AtmoProbe™ utilizes a 100% solid zirconia electrolyte sensor mounted within a solid zirconia seat. The solid slip-cast zirconia sensor eliminates seams and seals near the measurement point that typically cause offsets and premature failures of most oxygen probes. Furthermore, the unique secondary 100% zirconia seat serves as a shock absorber and provides an extremely robust mechanical design that can handle repeated temperature cycling and mechanical stresses without damage.

The AccuCarb® Carbon/Oxygen Probe is a high accuracy zirconia oxygen sensor designed for the heat treating industry. This carbon sensing probe is a new, second generation zirconia sensor, specifically designed for highest accuracy, longest life and lowest cost. The AccuCarb® Advanced Probe is specifically designed for thermal toughness and can be installed and removed from a hot furnace in one-quarter of the time of conventional carbon sensors.

µdox is a multi-parameter hand-held measuring device that determines relevant measured values for checking the water quality. These include pH, redox, total hardness, acid capacity and dissolved oxygen with a resolution of 1 ppb. The measuring device is particularly easy to use and to display and record data from up to eight measuring points. Fast analysis of oxygen in the µ range with response times of t90 or t99 of approx. 13 s or 30 s. Oxygen, pH and redox can be determined in parallel. The sensor systems have integrated transient monitoring. Languages and units of measurement can be parameterized. The handheld measuring device is particularly suitable for measurements on hot and steam boiler systems, in district heating systems and power plants.

The CS87™ and CCS 2000™ series of oxygen sensors are designed for measuring the oxygen partial pressure of the furnace atmosphere. The robust design withstands thermal shocks and maximizes service life. A self-cleaning mechanism keeps a permanently clean surface between the zirconium dioxide and external electrode, always ensuring accurate signal detection. The modular construction allows easy disassembly /assembly and fast replacement of parts. FEATURES & BENEFITS • Easily installed and connected to your equipment • Modular construction allows easy disassembly /assemblyand fast replacement of parts • Robust design withstands thermal shocks • Self-cleaning mechanism ensures constant accuracy of signal detection • Accuracy +/- 0.05 weight percent carbon in normaloperating range • Response time less than 1.0 second

The AccuCarb® LTA Sensor is specially designed oxygen probe for annealing atmospheres and temperatures. While the electrode designs of standard oxygen probes fall short due to the high impedance of the device at annealing temperatures, the unique electrode contact and solid electrolyte substrate of the AccuCarb® LTA takes care of this problem. The sensor is also gas-tight for hydrogen applications to ensure safe operation.

The AccuCarb® Ceramic Probe is a high accuracy zirconia oxygen sensor designed for the heat treating industry. AccuCarb® Ceramic Probe is a patented, ceramic sheathed probe, high temperature probe, specifically designed for generator and for metal sintering applications. The standard model has an integral type K thermocouple and a tube fitting for air purge burnout of soot.

The PROTHERM 470 controller is designed to monitor, control, record, and archive combustion processes running in a furnace or simultaneously in multiple chambers. This powerful controller is suitable for various types of batch and continuous operations and can be installated on new, retrofit, or refurbished equipment. The fully configurable I/O channels can be used with oxygen sensors or any sensor with an analog output signal or Modbus communications. FEATURES • ½ DIN multi-loop embedded programmer with a color display and turn-and-push knob navigation • Up to 32 programmable PIDs included • built-in calculators for real-time carbon and/or nitrogen diffusion, and hardness profile • mathematical model for calculating atmospheric parameters • integrated web server for browser-based remote access. • works with internal and/or external I/O’s

Oxygen is essential for life. Measuring oxygen concentrations plays a central role in controlling biotechnological processes . No matter if fermentations, scale-up studies, bioproductions in lab or industrial scale, the BCP-O2 sensor determines the oxygen concentration in realtime (real time monitoring) in a very convenient way. By measuring the oxygen concentrations oxygen limitations can be avoided and conclusions to metabolic activity can be drawn. With the help of measuring the oxygen important process parameters as OTR oxygen transfer rate or respiratory quotient RQ can be determined. Using BCP-O2 simplifies process optimization in bioprocessing and makes it efficient and precise. In contrast to other sensors the BCP-O2 has in integrated automated temperature and pressure compensation and can be connected to each and every fermenter type. BCP-O2 doesn´t need a minimum flow rate and thus can be applied from small (lab) scale (e.g shake flask) up to the large industrial scale.

The analyzer for carbon dioxide and oxygen has been specially designed for monitoring cell growth processes in biotechnology. The device can be installed directly in the exhaust flow of the bioprocess and measures the concentration of CO2 and O2 there in real-time. The BlueInOne Cell automatically compensates any fluctuations of pressure and humidity in the system. The readings are therefore extremely accurate even under fluctuating measuring conditions. The BlueInOne Cell gas analyzer is fitted with an IR CO2 sensor, as well as a electrochemical oxygen sensor with galvanic cell. The O2 detector offers a measuring range of 0-100 % Vol. for oxygen, long-term stability and has a very high resolution of 50 ppm. The device can also analyze anaerobic processes with high precision.

Oxygen combination sensor with built-in Type S thermocouple and holding tube connection. The standard dimensions are connectors with 22 x 150mm or 27 x 150mm in stock. The sensor is not heated. Minimum operating temperature is 500°C Configuration: Connection head form A with M20x1,5 cable gland Pressure range: Ambient to max 2 bar pressure Fitting: Thread G3/4" DIN 228 Thermocouple: 1 x Type 01 - S PtRh(10%) - Pt DIN EN 60584-1, Class 1 Protection tube: Ø 17mm Protection tube material: 99,7% Al2O3 SAT tube: 1 Nominal length: 27.559 in ( 700 mm ) Weight: 2.425 lbs ( 1.1000 kg ) ECCN: N AL: N Commodity code: 90258080 Including : - Certificate of calibration in accordance to DIN EN 60584-1 with correction values from 150°C to 1320°C in 140°C steps. - Certificate of conformity including production data and Helium leak test results. - 4 years warranty against drift and thermocouple wire defects provided the ceramic tubes are not damaged.

Oxygen combination sensor with built-in type S thermocouple and threaded connection. Applications (examples): The sensor is used, for example, in carburizing plants to control the C-level, in forging furnaces to control the air supply of the gas burners, or in the atmosphere of crematoria. The sensor is not heated. Therefore, a minimum operating temperature of 500 ° C is required. Material Order: Assembly: Connection head form A with M20x1.5 cable gland Pressure range: Ambient pressure up to 2 bar Temperature range: 520 ° C to 1300 ° C Connection: thread G3 / 4 "DIN 228 / thread G1" DIN 228 Thermocouple: 1 x Type S PtRh (10%) - Pt DIN EN 60584-1, Class 1 Protection tube: Ø 17mm Thermowell material: 99.7% Al2O3 Continuous zirconia tube as electrolyte Reference air connection: Ø 6,0 nozzle max 10 liters / hour Purge air connection: Ø 6,0 nozzle max 200 liters / hour Gas electrode: spiral / helix platinum wire Air electrode: spiral platinum wire

Monitoring of oxygen concentrations in bioprocesses in real time offers the possibility to learn about the actual metabolic state of the culture and use the information for process optimization. Values like OUR, OTR, RQ or even feeding strategies are essential for process control and optmization. BCP-O2 oxygen analyzers in the simple PA housing have a space saving design and are suitable for small scale stuides (e.g experiments in shake flasks) up to industrial scale processes. Due to the integrated automated temperature and pressure compensation gas cooling, specific valves or pipes are unnecessary. Gas concentrations can be measured directly in the process without expentiture.

Online real-time measurement of O2 in biotechnological processes is especially helpful and delivers important information about the acutal status of the culture. No matter if fermentation, bioproduction, scale-up study or else knowing the oxygen concentration directly in the process is essentiel for the success of the process. Oxygen limitations or exceeding certain values can be dected and actions of regulation can be done in time. The measurement principle of BCP-O2ec is an electrochemical principle which can cover - after being calibrated - the whole spectrum of 0-100%vol O2. Like the other sensors of the BCP series it fits on almost every fermenter, every pipe from lab to industrial scale and is very easy to install and needs only few maintenance. BCP sensors can be ordered with aluminium or plastic housing, depending on what you like and where you will apply them.