Plastic material processing - Import export

Process of grinding and ultra fine grinding during which compressed air is blown into the grinder under high pressure through nozzles, thereby swirling and crushing the particles. Examples of our services: 1. PA12: d50 = ca. 5 µm; 2. PEEK: d50 = ca. 8 µm; 3. PPS: d50 = ca. 12 µm; 4. PA11: d50 = ca. 8 µm Let us know what you would like us to do for you!

Hedgehog fingers/ hedgehog mats/ hedgehog bands are used for safe transport of sensitive and pressure-sensitive fruit as well as vegetables. The hedgehog tapes can even be glued with a PVC carrier tape. Thanks to an approval according to various regulations of the EU, we can offer you a top material with the casting polyurethane Intec E for extreme applications in contact with food. Whether for small quantities from 1 or for large-volume components weighing up to 900 kg, Intec E covers the entire range in hardnesses from 45 Shore A to 93 Shore A. If you need large quantities, we offer food contact approved materials in injection molding with up to 6 kg weight and 1.5 m² area.

100% No: 1 Grade Carnauba Base. OSKAR'S M-700, especially formulated for easier application to polyester- and epoxy moulds. Highly heat-resistant. Provides outstanding mould protection and easy release of finished parts. Formulated to prevent wax build-up. Silicone free.

Pipe lining made of cast polyurethane (75 Shore A). The lining is held from the outside via two flanges. Due to the extremely good abrasion resistance you have proven our linings!

The screw elements can be mounted on a square shaft. You transport bulk materials into bins or silos via rotary movements.

The Dexnyl PEEK filaments of BIEGLO is a high performance product made by melt spinning. Semicrystalline PEEK has high tensile strength, it is exceptionally resistant to chemicals and can withstand extreme temperatures. These features ensure a longer product life, lower maintenance costs, less machine downtime and wider material design options compared to steel or aluminum parts. PEEK filaments can be used very well for 3D printing. Printing with PEEK requires 360 ° C to 380 ° C. So far, only specially modified 3D printers are able to achieve this heat. Sliced ​​woven and/or unidirectional fibers significantly reinforce matrix material and are a popular additive for composites. PEEK filaments are also used on musical instruments, rackets and wide or narrow woven straps, filtration mesh fabrics and sewing threads. Due to their low weight and high temperature resistance, PEEK filaments are popular in many other industies, such as automotive and aerospace industries.

Customer requirements for environmentally friendly products with high design standards, economical production methods and maximum safety have led them to rely on our expertise and technologies since 1959.

DG Mixing process which under the application of high speeds injects enough energy into a powder quantity to create a stable compound from different types of powders and grain particles. Used, for example, for coating surfaces of one type of particle with other particles.

We produce blanks from plastic in line with your specifications. Upon your request, we also process pellets specified and also provided by you in our injection molding department. We keep a wide range of common plastic grades in stock, which we process into test specimens of various sizes according to your specifications. On request we also procure special materials and process these in line with your specific requirements. We process every available type of pellets to form DIN A5 format sheets or smaller sheets lap shear test specimens 100 x 25 x 3 mm dumbbell test specimens We deliver various surface finishes structured high-gloss automotive graining used by a wide range of car manufacturers We deliver every SMC quality depending on the availability of prepregs with class-A finish also in automotive quality Types of plastics ABS, PC, PE, PMMA, POM, PP, PS, PVC, PET, PTFE, PA6, PA6.6, PU, Polymer-based glass fiber-reinforced plastics

A universal fast cutting mixture of fine and medium fine abrasive particles, for outstanding buffing action. Formulated for profes­swnal, high temperature machine buffing, but can also be applied by hand. Especially formulated for the preparation and maintenance of polyester and epoxy moulds or surfaces. Devel­oped tot quick and easy removel of the „coarse marks" and scratches remaining on the surface after the „wet and dry" sanding procedure. M-200 LIQUID EXTRA HEAVY DUTY CLEANER, is the most abrasive cleaner and the first to be used after the sanding procedure - then followed with M-300 LIQUID HEAVY DUTY CLEANER (fine abrasive), for the final high gloss surface. The unique feature of the polishing alumina used for the OSKAR'S M-200 and M-300, is that the abrasive particles „break-down" to finer and finer particle size, during the appli­cation, and thereby ensure both effective and gentle cleaning and polishing action simultaneously, without any possible damage to the gel-coat.

OSKAR S M-800 is especially formulated for mouldings with high exoterm temperature or preheated moulds in polyester, epoxy, aluminium or nickel. lt contains a mixture of high quality synthetic waxes and lubricants, to provide an outstanding heat resistant mould protection and easy release of finished parts.

M-50 is an universal, fast cutting formula of medium fine abrasives with extre­mely uniform particles that gives an ontstanding polishing action for high tem­perature machine buffing. M-50 is developed to simplify all common heavy duty buffing, formulated especially for the preparation and the maintenance of Polyester and Epoxy moulds er surfaces. Developed for quick and easy remo­val of coarse marks and scratches, remaining on the surface after the „wet and dry" sanding procedures. For the final deep gloss finish, OSKAR'S M-100 BUFFING AND POLISHING COMPOUND is recommended. Contains no additives harmful to Polyester gelcoats er Epoxy surfaces. Does not contain silicones or waxes.

BIEGLO offers high temperature resistant and flame retardant fibers. The application is similiar to meta-aramid, but PI fibers have its own advantages. The long-term service temperature is 260℃. The decomposition temperature is 560℃. The LOI is 38%, it means it is non-flameble fiber. The Dexnyl Polyimide fibers are applicable in many products, but they are used best in niche-applications with extreme standards for the material: 1- FR Protective clothing: e.g. military fligth clothing, flame resistand underwear, firefighter uniform etc. 2- High temperature filtration and industrial insulation: e.g. dedusting filtration for cement factories, steel or powder plants, air filtration for painting area operated at more than 300°C . 3- Composite material: taking advantage of insulation, flame retardance and high emperature resistance, chopped fiber can be used as reinforced material.

Two current examples of Dressler Group innovations: Spherical Powder Technology (SPT) and the development of integrated processes. SPT is a process that allows powders to be made out of high-performance polymers that cannot otherwise be pulverised. This opens up completely new kinds of applications, using processes such as 3D printing/additive manufacturing, that were equally impossible before. Meanwhile, integrated processes allow grinding, sieving and dust removal to be carried out in a single operation rather than separate steps, thus saving energy and time.

Sustainability is an important part of BIEGLO GmbH where we assist our customers to get rid of the scrap their processing produces, try to support the environment and foster the economic sustainability. Based on the specialization of our company, we focus only on high performance polymers; especially PEEK. We collect scraps and meet our recycling partners needs. We have a wide range of PEEK scraps in differnt forms, such as shavings, regrind and small parts. If you are interested in buying those scraps, please do not hesitate to contact us. On the other hand, if you have PEEK scraps that you want to sell, kindly send us the details of the material.

Dressler Group (DG) has four brand values: flexibility, quality, innovation – and service. The last point is so important, a Dressler subsidiary bears its name: Dressler Group Customer Service. After all, the family business is renowned for its absolute customer focus. The best way to get to know Dressler Group is in person: Your contacts: Jan Dressler, CEO, COO: jan.dressler@dressler-group.com Christian Manteuffel, Team Manager Sales: manteuffel@dressler-group.com Alexander Leis, Staff Member Sales: leis@dressler-group.com

At our Technical Centre, which has proven its worth over many years, even the smallest quantities bring you great benefits. With an area of over 1,000 square metres, we offer the perfect facilities to verify how the raw materials will actually behave in the intended processes and finishing steps. In addition, we run scalable test series to generate reliable data for calculating costs. The process in three steps: 1. Pilot trial: testing on the smallest scale 2. Scale up trial: testing on the high-performance universal mill, with close support from our experts 3. Large-scale production: testing on the large plant for production on an industrial scale

Fine grinding of dry products is a core competence of the Dressler Group. An extensive range of machine and system programs are available for this, offering the right solution for almost all applications. Finenesses from 1 μm (d97) and into the millimetre range can be reproduced here.

Method for determining the grain size; air jet sieve, vibrating sieve, but also used in a production system for separating the coarse component of a powder so as to obtain the desired grain size distribution. Using acceleration to separate particles of different weights and therefore mostly different sizes.

Recording of data and events in written form for later reference. Full documentation is important for all stages of an order. All relevant data is documented and archived, from order entry, production, quality assurance to dispatch. This ensures that the individual processes can be traced back.

We developed a special process for making fine powder systems and composites from low-viscosity melts. With the patented cryo-spraying process CSP, it has become possible to produce highly sensitive products directly from a hot melt to form a solid powder without after-cooling. The entire spraying process is overlaid with nitrogen and also protects very critical substances against oxidation and thermal stress.

DG Grinding processes with simultaneous cooling of the raw material to temperatures far below ambient temperature (e.g. minus 30°C); usually done with the help of liquid nitrogen, which has a temperature of around minus 196°C.

Plastics processing through the homogeneous mixing of additives, particularly in extruders at temperatures above the melting point.

We grind our customers products at temperatures below room temperature.

Available with stainless steel axle with suspension for permanent belt contact. We will be happy to assist you with the initial installation. Thanks to an approval according to various EU regulations, we can offer you a top material with the casting polyurethane Intec E for extreme applications in contact with food. Whether for small quantities from 1 or for large-volume components weighing up to 900 kg - Intec E covers the entire range in hardnesses from 45 Shore A to 93 Shore A.

At our Innovation Lab, we develop entirely new processes when the desired results cannot be achieved with standard solutions. Our customers can practically watch over our shoulder and participate in the process to the extent they choose. The results are then put to the test in the adjacent Technical Centre. Sometimes this opens up whole new business areas for our customers. Getting more than they bargained for – that’s one more thing our customers appreciate.

ProTec designs and supplies innovative solid-state polymer post-condensation lines and complete PET bottle flake recycling lines. The batch tumble reactor which combines homogeneous mixing with short processing times is the keystone of the line. The IV value (intrinsic viscosity as a yardstick for molar mass) of polyesters (PET, PBT, PTT etc.) and of polyamides (PA6, PA66 etc.) can be purposefully increased by precise control of temperature, vacuum and processing time, with or without defined addition of auxiliaries.

With the METROFLOW gravimetric material loader, plastic processors can automate important areas of the production process cost-effectively and efficiently. The METROFLOW weighs every single load and evaluates the results, with a guaranteed precision of <1%. This improves the entire material management process and allows for full traceability. The material loaders come in 6, 10 and 30 liter volumes. The METROFLOW series is part of the motan range of products and systems for all stages of management, conditioning and preparation of plastic granules. The design quality, plus the engineering, ensures high performance and reliable operation.

Efficient, accurate material drying is a crucial element in the processing of engineering plastics to ensure impeccable product quality. LUXOR CA A series compressed air dryers with ETA­-process® and ETA plus® energy saving technology are specifically designed for supplying dried plastic granulate for many different plastics processing applications, with material throughputs up to 20 kg/h. Dryers can be mounted directly on the throat of the processing machine or on an adjacent support frame.