Removable - Import export

Reliably removes adhesive residues as well as grease, oil and tar stains from textiles and carpets. Other sizes available on request

Effective against mold on many surfaces such as mortar, tile, grout, stone, plaster, wood and wallpaper. Use biocidal products with care. Always read the label or product information before use. Other sizes available on request

The small drum pump COMBIFLUX with removable motor FBM-B 3100 is particularly suitable for pumping comparatively small quantities from containers such as cans or up to 200 litre drums. The small diameter of the outer tube allows pumping even out of narrow openings. The pump kits consists of pump with motor, 1,5 m hose and hand nozzle. Product attributes: - Connection motor and pump via quick-action coupling - Sealless in the liquid area - Small outer tube diameter - Holding hook for hand nozzles at the pump discharge - Low weight Benefits: - Motor easy to remove - Several pumps can be operated in series with one motor - Also suitable for filling smaller quantities - Can transfer from narrow-necked and containers difficult to access - Minimal force required to change drums - Hand nozzle always quickly at hand due to holding hook - Low storage space required

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

Dissolving of a wide range of sealants and adhesives such as polyurethane residues, materials containing epoxies Elimination of oily and greasy soiling Removal of bitumen and tar splashes Dissolving of labels and adhesive strips Removal of paints on a PMMA and PU resin basis from metal surfaces Advantages and benefits Good infiltration of adhesive films allows easy removal of the residues from the surface Good washable with water after use Applicable to surfaces of metal, stainless steel, glass, wood, ceramics. Do not apply on sensitive materials such as PVC, PS or on painted surfaces Low effect on the climate and no negative influence on the ozone layer (ozone-depleting potential: ODP = 0) Free of surfactants, halogenated and aromatic solvents

Castrol Transmax Manual EP 80W-90 is a mineral oil-based manual transmission oil of viscosity class SAE 80W-90 for use in transmissions where the API GL-4 requirement is prescribed. Advantages -High temperature stability protects against deposits and oil thickening -High wear protection and good load-carrying capacity leads to extended service life of the transmission components Specifications API GL-4 MAN 341 Type Z2 ZF TE-ML 02B, 17A

The Pump Set B2 Battery is suitable for low viscosity, aqueous to slightly viscous media. The set is suitable for the removal of small pads such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. . Exchangeable, powerful battery with Li-Ions . Battery life 35 min at maximum speed . 1 battery charge empties approx. 12 x 200 litre containers . BLDC Motor with high efficiency up to 70% . infinitely variable . high battery life . automatic shutdown in case of overload . sophisticated quick release * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

Maintenance oil for machines, mixers, moulds and mixings trucks, significant reduction of cleaning time, extends lifecycle of treated machines. Very good sticking, strong releasing effect, facilitates fast and easy cleaning, contains additional corrosion-inhibitors.

Biological based concrete stain and cement remover for resistant paving and flooring of natural and concrete stone. Fast and reliable removal of concrete-, cement-, lime- and efflorescence stains.

Concrete stain remover and intensive cleaner concentrate for machines, mixer, moulds and mixing trucks. Fast and reliable removal of concrete-, cement-, lime- and efflorescence and other residues, contains special corrosion inhibitors.

INOX STAIN REMOVER IX 500 is a fast and effective stain remover and removes stains from oils, greases, drinks, tars and many other types effortlessly and without leaving any residues. It is recommended for use on textiles, vehicle interiors, carpets and many other surfaces.

INOX® Engine Cleaner is a strong alkaline special cleaner for external cleaning. This cleaner degreases engine compartments, transmission parts, axles, chassis, engine and other components. Due to its strong oil and grease dissolving power, it cleans the most stubborn dirt in passenger cars and commercial vehicles.

The INOX® Oil Anti Smoke counteracts the formation of smoke and soot in all 4-stroke, diesel and gas-powered engines. The product ensures optimal lubrication of all moving parts. This makes the engine run smoother, smoke will be reduced and wear and tear reduced.

The neutralisation unit Neutrakon® is suitable for the neutralisation (increase of the pH value above 6,5) of acidic condensates of gas condensing boilers (heat exchangers) and/or flue gas systems up to 1000 kW. With booster technology for an increase lifetime. The Premium Line consists of 6 different units for the neutralisation of acidic condensates of gas condensing heating units up t0 1000 kW Neutrakon® N35 – up to 35 kW Neutrakon® N65 – up to 65 kW Neutrakon® N170B - up to 170 kW Neutrakon® N300B - up to 300 kW Neutrakon® N650B - up to 650 kW Neutrakon® N1000B - up to 1000 kW

The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

INOX Tar Remover is a very fast-acting cleaner for all tar, grease and oil contamination, as well as similar soiling on motor vehicles. The product can also be used for cleaning tools, equipment, devices and machines in which tar is processed. Due to the fast effect the tar remover is particularly economical in use and, when used properly, rubber and plastic friendly.

The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70% * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C .

The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70% * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

Concrete stain and cement remover for resistant paving and flooring of natural and concrete stone. Fast and reliable removal of concrete-, cement-, lime- and efflorescence stains.

Master patterns must be treated with ALWA surface tension remover (art. no. 9500000), so that the ALWA release lacquer does not roll off. ALWA surface tension remover is applied in a thin coat with a brush or a sponge. After approx. 10 min. the solvent is evaporated and ALWA release lacquer can be applied.

Perfect fit: Fat remover ASF 560 E for pork belly and loin of pork. Maximum yield with little post-processing. Optimised blade holder profile for exact adaptation to the cross section of the product. Electronically controlled movement along longitudinal profile for exact adjustment to the fat contours. The result: Less fat on the pork belly/loin, less lean meat in the belly/back fat. Advantages Minimal post-processing after the processing workflow Line concept: Perfect integration of the machine in stripping workflows Options: Operating personnel can also remain outside the machine stand Curved blade holder profile for ideal product adaptation Special sub-frames (height adjustment)

with its compact design using a structural aluminum profile, conveyor system is ideally suited for continuous duty applications in multiple shift environments. using the benefits of modular construction, this conveyor can be readily integrated into new or existing equipment or be used as a freestanding conveyor for bulk handling and loading aplpications. inclination smoothly adjustable steplessly fourwheel drive, 2 steering wheels with parking brake 13 collector rollers, height 20 mm transport cover PUeven, 2 layers, to be used at temperatures from 30 120°C, oiland grease resistant, antistatic funnel (attachment), aluminium anodized drop area pivotable clip/aluminiumclosed bar system suitable for materials to be conveyed from a thickness of 2 mm on for lower thicknesses of materials to be conveyed, allaround corrugated material edges made from celloflex. This reduces the usable width of the material by approx. 70 mm

For widths from 200 to 500 mm Pass line height 850 to 1,200 mm the base systems can be simply married with the tslots of the belt body the Base System 51.2 is mounted on one side only and supports widths of up to 150 mm; due to its very large floor plate, one base is usually enough the Base System 53.1 is mounted left and right of the belt body and thus suitable for wide units; since the mounting feet are relatively small, two bases are recommended

the conveyor system TB2000 distinguishes itself through its compact design. A modular scaling allows quick delivery while serving a great variety of applications. large belt widths and higher capacities allow removal of scrap also with bigger presses. the nuts on the sides can be used problemfree for tightening the directional controls or other accessories

the conveyor system TB1000 is suitable especially for the integration into complex machines (e.g. removal of scrap from punching machines) because of its compact design the aluminum extrusion framework resists twisting and at the same time features good load capacities under the running surface of the belt, a stainless steel plate is mounted to secure an enduring resistance to abrasion

Instead of mounting one or more Transporters to each die, the PSKS features one unit only – mounted directly to the face of the bolster. A heightadjustable mounting bracket allows flexible usage with multiple tools and dies. The only extra thing needed will be scrap trays in different sizes On the left and right end of the system, heightadjustable brackets with linear bearings support a crossmounted aluminum profile. The profile is fastened with standardized clamping brackets and will transfer the motion over the whole width Numerous trays can be mounted. Two rugged nylon Ushape clamps are permanently fastened to each of the trays. The fasteners are designed to slide and fit snug onto the aluminum profile so that exchanging of trays is just a matter of seconds. The length and width of the tray is determined by the size of the die slot.