Protections - Import export

Technical problems and new ideas are the inspiration of our engineers while creating the solution for your substation to fulfill the project requirements. The broad expertise in different protection and control vendors and the excellent collaboration with our partners we deliver solutions for your substation. Our expertise in engineering lies within: Parameterization and configuration of IEDs SCADA modeling and integration with protocols IEC 60870-5, DNP3, Modbus etc. SAS/SCS modeling and integration via IEC 61850. SCL-files modeling. You find a detailed view of our expertise on our website:

PMA cable protection systems are used wherever the mechanical protection of electrical lines and cables is needed. Highly flexible cable protection tubes are specifically suited for the additional protection of cable guides in e-chain® systems. Due to the combination of technical knowhow and the strictest international safety guidelines, PMA fulfils the worldwide requirements of industrial markets in application areas like mechanical engineering, automotive construction, fiber optics, solar systems as well as applications in the robot sector with high speeds and millions of alternate bending cycles.

AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.

AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.

AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.

CIC provides on-site support with experienced specialists when your supply chains threaten to break down, bottlenecks endanger your supply and ability to deliver, or crises need to be mastered quickly, flexibly and internationally. We offer you : Supply chain management Supply Chain Protection Bottleneck management at the supplier Bottleneck management in your production Bottleneck management for quality problems Bottleneck management for tool problems Bottleneck management for personnel problems Bottleneck management in insolvencies Securing the supply of parts Crisis management, also internationally

Double-acting special cylinders with a customer-specific base flange, pre-assembled with fork mounts with flexible rubber bellows over the piston rod to protect against coarse dirt and aggressive environments. Specially designed for use in commercial vehicles or agricultural machinery.

We know the challenges that new technologies in e-mobility (BEV) entail for established players in the transition from combustion engines to New Energy Vehicles as well as for start-ups in the process of structural development in daily practice. We would be happy to take over for you: quality assurance rework conversions field actions component qualification startup protection Congestion management production management and many other tasks that can be completed quickly and flexibly

Bespoke solutions for all structures requiring corrosion protection. Our specialists develop new components and undertake research to optimise corrosion protection. They design, build and monitor corrosion protection systems for pipelines, compressor and pumping stations as well as industrial installations, and provide advice, expert opinions and studies. We can calculate the degree of high-voltage interference on pipelines and build protection systems to prevent hazards for individuals as well as AC corrosion. Further information with a full description of our services is provided in our brochure entitled “Intelligent Corrosion Protection”. As a customer you will receive technically sophisticated, efficient and effective products and services from a single source: Germany´s competence leader, e.g. Passive corrosion protection High-voltage interference & AC corrosion Accredited expert services Condition assessment Training

In order to protect pipelines from damage (e.g. during construction activities), they are regularly inspected on foot, from a vehicle or helicopter. Practical experience has shown, however, that these methods do not ensure continuous and comprehensive monitoring. PipeMon+® closes this gap, allowing appropriate measures to be taken immediately when a pipeline is suddenly damaged. OGE has developed a pipeline monitoring method based on the principle of cathodic protection (CP). When a cathodically protected pipeline is damaged by construction equipment (excavator, drill, rotary cultivator, etc.), the protective current distribution on the pipeline changes. Using appropriate sensors and special analysis methods, these events can be detected in real time.

Safety and wearing comfort are the most important criteria for Protector Style 300, it provides best possible conditions for a easy, secure and modern helmet. Due to the proved Protector-technology in development of helmet interior in combination with high-density polyethylene for helmet shell leads to a very comfortable helmet. Features of Protector Style 300: Weight: 310g 30mm slot in order to combine ear- and face protection Rain gutter High wearing comfort by 4-point interior design Material: HPDE Head sizes: 50-66 cm Approvals: EN 397 VDE Accessories for Protector Style 300: Sweatbands (terry or leather) Chintrap with bungee or cotton Folding face protection Hearing protection

This face shield consist of Visor bracket of aluminium, View disc of scratchproof acetate- plastic, it is movable (can be folded upwards) and is fixed to helmet Style 300 Elite (manufacturer Scott).

VISTA PRO Full mask VISTA PRO ® The new full mask serie VISTA PRO ® is characterized by its great variety and takes account of highest breathing protection. A modern succeeded construction with wide, very good closing of two sealing edges. The smooth and yet robust rubber body adapts itself comfortably to every shape of face. Firstly, the construction of a full mask provides a truly distortion-free field of vision. Even with regard to straps a new position has been chosen. Unlike with the usual full mask, the head straps are not fixed it selves to mask body, but fixed to frame of vision field. All known device connections are available. Consequently, the complete range is from simple filter apparatus with double filter connector (Vista-pro DUPLA), up to flame-resistant breathing connecter with plug-connection for high-pressure technology. A long-term mask which attracts more and more user! For maintenance no tools are necessary, a dream for every equipment manager. Vista-pro...

Respirator masks are called full mask or respirators, because they protect not only the face but also the entire face and therefore eyes are fully protected. Sealing line goes through forehead, cheeks and underneath the chin. Full masks have an additional inner mask, which on the one hand minimise the “mask dead space” (reduction of collection of consumed air), on the other hand through special routing of the air to prevent the visor misting up. The body of full masks can be produced of several materials. Therefore, mask bodies of black neoprene and normally coloured silicone are available, as well. The latter is perfectly suitable for persons with sensitive skin. All Ican- full masks of 20-serie have following features: Nack strap in plastic material, 5-point flexible straps 80°C – wraparound windshield, round thread Synthetic speaking membrane, no replacement necessary Available with Perspex-, triplex or PC glass Full masks do not always correspond to consistency. Therefore,...

Full mask BLS 5500 of BLS made of silicone is equipped with two filter connections. Features: Soft silicone of face cover provides a high comfort for user Visor enables distortion-free visual field and guarantees a higher level of security, as well as less fatigue for user Visor passed optical test of class 1 Visor is protected against of inner fogging, scratching and aid Improved anatomical fit by ergonomic straps Valve of silicone inner- mask are flat and provides higher safety Optimal position of filter for maximal mobility and greater field Accessory (optional): Frame for insertion of individual lenses inside the mask Visor protection Textile adjustable straps Carrier bag Details: Face seal made of thermoplastic Inner mask of silicone Visor of polycarbonate Filter connection: ABS Adjustable straps of synthetic rubber Weight: 600 g BLS 5500 is CE-certificated and complies with all guidelines of PSA! Datenblatt

Full mask BLS 5400 of the manufacturer BLS, made of silicone is suitable for use of all standardized additives, e.g. filter against gases and dust particles as well as combined filters and electric filter apparatus. Features: Soft silicone of face cover provides a high comfort for user Visor enables distortion-free visual field and guarantees a higher level of security, as well as less fatigue for user Visor is protected against of inner fogging, scratching and aid Improved anatomical fit by six fold adjustable flexible straps Valve of silicone inner- mask are flat and provides higher safety Selectable textile straps enables higher wear comfort than rubber straps, as they are lighter and more breathable Optimal position of filter for maximal mobility and greater field Accessories (optional): Frame for insertion of individual lenses inside the mask Visor protection Textile adjustable straps Carrier bag Details: Face seal made of thermoplastic Inner mask of silicone Visor of...

The full mask BLS 5150 of BLS made of thermoplastic and is suitable for use of all equal standardised as filter against gases and dust particles, as well as combined filters and electrically filter units. Features: Soft thermoplastic of face cover provides high comfort for user Visor enables distortion-free visual field and guarantees a higher level of security, as well as less fatigue for user Visor is protected against of inner fogging, scratching and aid Improved anatomical fit by six fold adjustable flexible straps Valve of silicone inner- mask are flat and provides higher safety Selectable textile straps enables higher wear comfort than rubber straps, as they are lighter and more breathable Optimal position of filter for maximal mobility and greater field Accesory (optional): Frame for insertion of indivual lenses inside the mask Visor protection Textile adjustable straps Carrier bag Details: Face seal made of thermoplastic Inner mask of silicone Visor of...

Compressed air bottles are exposed to several external influences during transportation. Scratches result by strokes and dragging on the ground, which counts to everyday stress of the CFK-bottles. Therefore, Schönwolf Hamburg offers protective covers in suitable sizes for your bottles. The protective cover protects your bottle against external influences with the help of the integrated ground padding. Protective covers are individual fabricated according to your specification. Consequently, please quote your bottle size when ordering. These covers are washable and exclusively manufactured in Germany.

The shape of PF 112 Extreme has been proved in type A segmentation, inside is continually developed: the extensive endurance test in fire container of I.F.R.T (International Fire & Rescue Training) proved, that PF 112 Extreme withstand extreme encumbers. Often used by trainers it has been exposed to high demands. Hereby this helmet could exploit its strengths! MED- approval Helmet type A Made of high performance glass fibre GFK60 good isolation, best protection and low weight without any screw holes from the outside, i.e. no drilling hose in the helmet – 100% stability proven shape with maximal ear freedom comfortable headring leather cushion for easy change 6-point orb-weaving suspension CASCO Disc-Fit™- size adjustments, step less individual fitting to head size (53 – 64 cm), if needed in seconds adjustable Carrier net Loop for hanging up helmet Helmet: EN443:2008 Visor: EN 14458:2004

Glasses with modern wrap-around design: Soft PVC-frame Wide elastic tape for highest wearing comfort Can be worn on standard goggles View disc is exchangeable Technical specification: View disc made of scratchproof polycarbonate Anti-fog coating Partly indirectly ventilated 160 degree field of view Weight: 126g Approval: EN166 1 B 349

Limit values (so called MAK-value) for pollutants in ambient air have been defined by law, which should not be exceeded. This is done with the help of specially coated activated carbon that is amongst others in the activated carbon filter, and removes pollutants from the air of the wearer. But from the first, the breathing air needs to contain at least 19% oxygen! Dependent on application area you can choose between filter types as follows: Type A: colour code: brown Organic vapour or gas with boiling point above 65°C Type AX: colour code: brown Organic vapour or gas with boiling point under 65°C Type B: colour code: grey Inorganic vapour or gas (no CO) Type E: colour code: yellow Sulphur dioxide and acid gases or vapour Type K: colour code: green Ammonia and ammonia derivates Type Hg: colour code: red Mercury vapour Type CO: colour code: black Carbon monoxide Type P: colour code: white Dust Breathing filters, depending on filter type, can remove certain pollutants from...