Shielding - Import export

Various requirements are imposed on modern device connection technology today. The main issues are progress in miniaturisation in engine and machine design as well as applications with increased power requirements. Safe data transmission must always be guaranteed, even in harsh environmental conditions. For connection on the device side, CONEC offers a broad range of unit side connectors. Fields of application are, amongst others: distribution cabinets, engine and speed sensor connection technology

Tubular-knitted copper tape made from Cu-ETP1 and Cu-OF1 in tin-plated, bare upon request, soft annealed. Single wire diameter Ø 0.10 mm, processed in 1 x 0.10 mm or 2 x 0.10 mm. Width 25 mm. For electrical shielding.

Shielding braids consist of bobbin wires, located parallel, which have been braided into a tube. Manufactured from Cu-ETP1, Cu-OF1, LEONI-Histral®-alloys (upon request), aluminium and stainless steel, with coating in bare, tin-plated, nickel-plated or silver-plated, hard or soft annealed. Sinlge-wire diameter ranging from Ø 0.10 mm to Ø 0.40 mm. Cross-section ranging from 0.25 mm² bis 400 mm². Tubular shielding braid is smoothly expandable and has a very good shielding effect. The couverage can be determined precisely by changing the braiding angle. Suitable for electrical and mechanical shielding of wires, cables, cable bundles and cable harnesses.

Flat-knitted copper tape made from Cu-ETP1 and Cu-OF1 in tin-plated, bare upon request, soft annealed. Single wire diameter Ø 0.10 mm, processed in three-fold and eight-fold. Width of flat-knitted copper from 20 mm to 100 mm. For electrical shielding.

-These sturdy snowdozers are available in 4 types (Type SCH-S steel shield trim, Type SCH-G rubber shield trim, Type SCH-V polyurethane shield trim, Type SCH-F spring-loaded shield trim, simple pick-up using forks) -can be secured to prevent slipping -adjustable shield, to the right or left -edge trim screwed to the shield; quick change possible The economic alternative: Type SCH-L

Round copper wire made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys, in bare, tin-plated, nickel-plated and silver-plated, soft annealed. Single wire diameter ranging from Ø 0.05 mm to Ø 0.254 mm. Number of wires used for strands: between 2 and 16 (subject to single-wire diameter). Single wire or multi wire on special bobbins fit for use in braiding machines. The braids manufactured by these machines are used in cables and conductors geared towards electromagnetic shielding or protection against damage as well as serving as a reinforcement.

Everyone knows that the key to a long and and troubleless operation of the engine is the use of high-quality motor oils and lubricants that meet the requirements of the vehicle manufacturer and its timely replacement. Buying oil and technical liquids from us, you can be confident in the quality of purchased products; then, our company is the official partner of such leading brands as CASTROL, MOTUL, VENOL, which is confirmed by the corresponding certificates. Our experts will help you choose lubricants, and prices will surprise even the most discerning buyer.

Windscreen Antifreeze Concentrate / Antifreeze Agent The windscreen antifreeze concentrate with active cleaning tensides for the windscreen washer system in winter. Fast cleaning without streaking. The product is adjusted to the desired freezing point by adding water. Can be used for all windscreens (also made of PC / polycarbonate) and headlight washers. Our windscreen antifreeze offers you first-class protection up to icy temperatures of -35 °C. Windscreen antifreeze also as private label Discover our high-quality private label windscreen antifreeze products. We offer you the opportunity to offer our first-class antifreeze under your own label. Available container sizes include: 500 ml, 1 l, 1.5 l, 5 l, 10 l, 25 l and 200 l. Made in Germany and exported to 50+ countries.

• Face shield to protect against class 2 (7kA) arcing faults • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The face shield is used with a head gear (GFKKH200) • The visor is manufactured from 2,0mm-thick Polycarbonate • It has excellent optical qualities • High impact strength • Good UV-protection

• Face shield to protect against class 1 (4kA) arcing faults • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The face shield is used with a head gear (GFKKH200) • The visor is manufactured from 1,5mm-thick Polycarbonate • It has excellent optical qualities • High impact strength • Good UV-protection

• Face shield to protect against class 1 arcing faults (4 kA / 135 kJ/m²) • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The electrician´s face shield is made entirely of plastic • The flexible plastic profile fits on many helmets • The visor is manufactured from 1,5mm-thick Polycarbonate • It has excellent optical qualities, and its light transmittance VLT (D65) according to ISO 10527:2007 i ≥75% • The visor can be folded up and can be locked in place in any position by means of a screw connection • The electrician´s face shield is attached in a non-slip manner by means of a wide, adjustable elastic band

• Face shield to protect against class 2 arcing faults (7 kA / 423kJ/m²) • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The visor is manufactured from 2,0mm-thick Polycarbonate • It has excellent optical qualities, and its light transmittance VLT (D65) according to ISO 10527:2007 i ≥75% • For better protection of the ears, the visor is extended toward the back • The visor can be folded up and can be locked in place in any position by means of a screw connection • For protection against heat entering through the bottom edge of the shield, the visor has a chin protection with a Nomex bib

• Face shield to protect against class 2 arcing faults (7 kA / 423kJ/m²) • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The visor is manufactured from 2,0mm-thick green Polycarbonate • It has excellent optical qualities, and its light transmittance VLT (D65) according to ISO 10527:2007 i ≥75% • For better protection of the ears, the visor is extended toward the back • The visor can be folded up and can be locked in place in any position by means of a screw connection • For protection against heat entering through the bottom edge of the shield, the visor has a chin protection with a Nomex bib

Easy and quick to use with an effective spray bottle. Other sizes available on request

The advantages of flexible packaging in stand-up pouches are the approx. 70% weight reduction and the approx. 90% volume saving when the container is empty. Furthermore, the bag can be printed all over, ideal for tight storage, no sharp edges, easy to transport, is easy to open, is resealable, 100% free of bisphenol A. This innovative packaging makes a significant contribution to avoiding waste, as well as to the increasingly required sustainability of products. Other sizes available on request

Very good cleaning performance and material compatibility Removes dirt and salt deposits quickly and effectively Gentle on paint and plastics Compatible with polycarbonate & suitable for fan nozzles Environmentally friendly More safety for children (contains Bitrex) DEKRA checked Made in Germany Other sizes available on request

Very good cleaning performance and material compatibility Removes dirt and salt deposits quickly and effectively Gentle on paint and plastics Compatible with polycarbonate & suitable for fan nozzles Environmentally friendly More safety for children (contains Bitrex) DEKRA checked Made in Germany Other sizes available on request

Other sizes available on request

Powerful cleaner against insects and grease. Compatible with polycarbonate and suitable for fan nozzles. Other sizes available on request

The de-icer spray is sprayed onto snow-covered or icy car windows or headlights. After a short exposure, the surface can be easily freed from snow and ice. Other sizes available on request

Very good cleaning performance and material compatibility Removes dirt and salt deposits quickly and effectively Gentle on paint and plastics Compatible with polycarbonate & suitable for fan nozzles Environmentally friendly More safety for children (contains Bitrex) DEKRA checked Made in Germany Other sizes available on request

• The face shield is made of 1 mm thick polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C bis +135°C • Good UV protection • Additional protection of the forehead due to the extended face shield • The face shield fits on the GFKKH100 headgear

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to+135°C • Good UV protection • 94% of the radiant heat is reflected by the gold layer • IR-protection shade 4-5

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C bis +135°C • Good UV protection • High impact strength • Additional protection of neck an chin due to fully enclosed face shield • Also available with non-fogging treated inner side

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to +135°C • Good UV protection • High impact strength • 94% of the radiant heat is reflected by the gold layer • IR-protection shade 4-4

• The face shield is made of 1,25 mm thick Cellulose-Acetate • Excellent optical quality • Resistance to temperature extremes up to +90°C • Available with welding protection shade 5 • Good resistance to chemicals • Lower notched impact strength

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extemes approx. -50°C to +135°C • Good UV protection • High impact strength • IR-protection shades 4-4 and 4-5 available • Additional protection of neck and chin due to fully enclosed face shield

• The face shield is made of 2 mm thick Polyphenylsulphone (PPSU) • Excellent optical quality • High resistance to temperature extremes up to approx. +220°C • Good UV protection • High impact strength

• This face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to +135°C • Good UV protection • High impact strength • The face shield has recesses on the side and is a perfect fit on the ear protection hard hat bracket • Also available with non-fogging treated inner side