Connectors- plumbing - Import export

Fittings Our manufacturing site in Switzerland produces over 100 different types of fitting under cleanroom conditions in compliance with DIN 16901-140. The fitting bodies are made of PFA, while the union nuts are made of PFA, PVDF or CPFA. We stock all the connections available on the market too. Emmen cleanroom plant GEMÜ has be producing valves and fittings at its new cleanroom plant in Emmen (Canton of Lucerne, Switzerland) since September 2012. A state-of-the-art manufacturing and assembly facility was built here when, thanks to commercial success, the capacity of our site in Rotkreuz could no longer keep up with demand. When planning and developing the facility, designers focused on creating a contemporary quality management system that is fit for the future. The result is that product and production quality are ensured, for example, by using specific inspected raw materials and through audits carried out by customers and official bodies.

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -20 to +120 °C - Working pressure range: -0.95 to 16 bar - cooling water, air, vacuum

— Whitworth pipe thread — Chambered O-ring — Sealing NBR, FKM — Material brass nickel-plated — Temperature range 32 to 122 °F (0 to +50 °C) — Working pressure range -13 to 218 psi (-0,9 to 15 bar) — Speed 800 rpm — Hybrid stainless steel ball bearing with ceramic balls

— Whitworth pipe thread — Chambered O-ring — Sealing NBR, FKM — Material brass nickel-plated — Temperature range 32 to 122 °F (0 to +50 °C) — Working pressure range -13 to 218 psi (-0,9 to 15 bar) — Speed 800 rpm — Hybrid stainless steel ball bearing with ceramic balls

— Whitworth pipe thread DIN ISO 228 — Chambered O-ring — Seals FPM — Material with media contact: Brass, dezincification resistant — Material without media contact: Brass — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 218 psi (-0.95 to 15 bar) — Not designed for steady motion of the tube

- Seals FPM - Material AISI 304/ 304L (1.4301 / 1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 348 psi (-0.95 to 24 bar)

- Whitworth pipe thread - Frame components with media contact: Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Frame components without media contact: Material brass chemically nickel-plated - Temperature range 32 to 176 °F (0 to +80 °C) - Working pressure range 0 to 362 psi (0 to 25 bar)

- Short design (exhaust-side throttle) - Adjusting screw with knurl - Whitworth pipe thread - VS seal rings - Material: brass nickel-plated, Al black anodized, KST - Type: Cone-type throttle - Allowable medium: Air - Temperature range 14 to 158 °F (-10 to +70 °C) - Working pressure range 7 to 145 psi (0.5 to 10 bar)

- Seals FPM - Material AISI 304/ 304L (1.4301 / 1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 348 psi (-0.95 to 24 bar)

— Whitworth pipe thread DIN ISO 228- Chambered O-ring — Seals FPM — Material with media contact: Brass, dezincification resistant — Material without media contact: Brass — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 218 psi (-0.95 to 15 bar) — Not designed for steady motion of the tube

— plug-in coding: round, triangular, hexagon, octagon — Fool-proof coding — 1.4404 (316L) / 1.4571 (316Ti) stainless steel — Seals: low temperature -50°C to 200°C (red) FDA — working pressure 0,5 bis 10 bar — With shut-off function — Suitable for compressed air