Window installation - Import export

The intuitive configuration, control, and monitoring software MediorWorks can be downloaded from any MediorNet mainframe via the Configuration Port of the Processing Card. This way you always have access to the correct software version of a specific installation. The software is a JavaTM based application, allowing any computer with a JavaTM Runtime environment such as Windows, Mac OS X or Linux to serve as the host for the application. MediorWorks auto senses the configuration and status of the system it is connected to. Five windows give easy access to any aspect of the MediorNet installation. All windows are visible at the same time. Alternatively, they can easily be accessed via one mouse click on the “Views”-window, which is floating above all other windows. The “Device Browser” shows all available nodes, the cards installed in the node and each connector of the specific media card. If a connector is selected, the “Connections”-window shows the active connections and how the...

Model 7020 FB4 is ready to install window section for use in internal areas. Use as a reception counter or night counter, with integrated intercom public 3 and glazing C3

HotCoils have a larger cross-sectional area and are thus capable of greater power than MicroCoils. For this reason they are used in hot runners with adequate space and where high heat densities are required. Owing to the large number of variants and for cost reasons, the sheath material for HotCoils is stainless steel - the standard for the market and thus also for Freek. HotCoils are large enough that thermocouples can be integrated into them. Our standard here is Type J (Fe-CuNi; red/blue), while Types J and K are also available conforming to the IEC and ANSI standards (see colour codes). Since the measurement point of a built-in temperature sensor is situated in the heater and never where the heat is actually required, a HotCoil with a thermocouple makes particular sense where the application allows the use of larger processing (temperature) windows or where the installation location or the design requires protection against overheating.

Self-adhesive PVC rigid profiles for quick and clean finish to window installations, covering the joint between the window frame and wall, and also as wall connection profiles for interior fittings. Profiles in PVC U window grade, new materials. Suitable for interior and exterior bonding. Acrylate foam tape grades; weather and ageing-resistant, permanently elastic. Follow the cleaning instructions for the window frame profiles.Wood and single-colour decorative strips coated with weather and ageing-resistant Renolit MBAS or Cova foil.

Trapezoid Window Bars G18 x 10, G35 x 13 Antique window bars for the architectural design of window casement systems with bevelled profile design and long lips. G 18 x 10 for smaller window units and fulfilling requirements for the protection of historical monuments. Comply with the special cutting notes for the 45° cross joint in accordance with the installation instructions. Nostalgic Window Bars G22 x 10 Nostalgic window bars for a visually appealing bar design. For appropriate window casement systems, small windows or to fulfil specifications relating to historical buildings. Bar design with long lips enables easy adhesion following cross joint cutting. Installation notes with cutting equipment. We can supply special cutters.

By inserting a 10 mm thick covering panel in the pre-assembled, self-adhesive or screwed U10 profile on the window frame, damaged niches in walls can be covered up following the installation of replacement windows. The F10/65 profile can be bonded in position to neaten the wall corner. The F10/65 profile is PVC window grade and can also be used to create a frame (e.g. for loft ladder openings).