Heating and air conditioning - Import export

Base Group specializes in the manufacturing of products for heating, ventilation and air conditioning (HVAC). We have been providing services in the heating, ventilation and air-conditioning sector for many years. We are manufacturer of heating structures, ventilation structures and air conditioning industry structures upon the earlier consultation with customers concerning their requirements.

TEPLOPANEL climatic cassette-type panels operate on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. Functionally it is a low-temperature energy saving infrared emitter. The heat carrier is water preheated by any hot water boiler, central heat supply or alternative source (for example, heat pump). Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects.

TEPLOPANEL climatic cassette-type panels operate on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. Functionally it is a low-temperature energy saving infrared emitter. The heat carrier is water preheated by any hot water boiler, central heat supply or alternative source (for example, heat pump). Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects.

TEPLOPANEL climatic cassette-type panels operate on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. Functionally it is a low-temperature energy saving infrared emitter. The heat carrier is water preheated by any hot water boiler, central heat supply or alternative source (for example, heat pump). Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects.

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

Electric infrared ceiling panels TEPLIY KVADRAT are low-temperature radiants for efficient heating of residential & office premises up to 4 m high. The system is based on principle of thermal infrared radiation. The advantage of transferring heat by radiation is the immediate effect of heating surfaces of objects that absorb heat from the panels, without preheating the air around them. Thus, all objects in the premises are heated, including floor, walls, furniture, equipment, etc. The heated objects emit heat secondary and give it to the air by means of convection. So, the system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room. TEPLIY KVADRAT panels are designed for comfortable and energy-efficient heating of any kinds of rooms, except rooms with high humidity. The panels can operate directly from the socket or standard thermostat-controller.

Supplying both work and leisure boats with heating and cooling solutions, Stream Marine uses Clion Marine as a primary manufacturer because of their capabilities and high success rate. Clion Marine are a Dutch climate control specialist with a well-established brand in the Netherlands. They have been developing and producing a range of climate control solutions for over 25 years. The full Clion range consists of Chillers, Self-Contained Units, Fancoils, custom made models and engine driven kits. The Clion products are specifically designed to be practical, reliable and efficient. All Clion systems are tested under extreme conditions to ensure that they are ready to withstand use in any extreme conditions they might face. Clion's full range consists of high quality, reliable and effective products that are built to last. Whether it be a leisure or commercial vessel, we are able to offer the right Clion product capable of providing you with a comfortable and controllable environment.

Anodized aluminum is a process that enhances the durability and resistance of aluminum by creating a protective oxide layer on its surface. This layer not only prevents corrosion and wear but also allows for custom surface coloration. Here are some key points about blue anodized aluminum: Color Options: Aluminum can accept a wide spectrum of anodized colors, including blue. Other available colors include pink, black, silver, gold, green, orange, red, and purple.Anodization serves multiple purposes: Corrosion Resistance: The protective oxide layer acts as a barrier against corrosion. Aesthetics: Anodized aluminum looks sleek and reflective due to the uniform oxide layer. Scratch Resistance: The tough anodic finish increases scratch resistance. Other Qualities: Anodization also affects wear resistance, heat dissipation, and adhesion. blue anodized aluminum combines aesthetics with functionality, making it a popular choice for various applications.

R290 is a new type of environmentally friendly refrigerant, mainly used in central air conditioners, heat pump air conditioners, household air conditioners and other small refrigeration equipment.

It is mainly used to replace R22 and R502 refrigerants in low-temperature refrigeration equipment; because R290 refrigerant is flammable, it is usually only used in low-temperature refrigeration equipment with a small amount of liquid, or as a component of low-temperature mixed refrigerant; R290 is compatible with traditional refrigeration oil. High-purity R290 is used as a temperature-sensing working fluid; premium and first-grade R290 can be used as a refrigerant to replace R22, R502, compatible with the original system and lubricating oil, and used for central air conditioning, heat pump air conditioning, household air conditioning and other small refrigeration equipment . R290 is a hydrocarbon refrigerant; it has no damage to the ozone layer and has a very small greenhouse effect.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

Our new, innovative inflatable DST module has sturdy and highly insulating double walls, and offers an unparalleled level of comfort and strength. Thanks to the use of the revolutionary 'drop-stitch' technology, the tent can withstand the harshest weather conditions. This makes it perfectly suitable for both long-term and short-term military operations in areas with harsh climatic conditions. Our DST module offers unprecedented thermal and acoustic insulation, significantly reducing both consumption and the cost of heating and air conditioning. Another advantage of using drop-stitch technology is that the walls are stronger and more durable than regular military tents. These modules therefore require less frequent maintenance and can be used for a longer period. The combination of durability and unmatched insulation values make this tent a very solid long-term investment.

We develop and manufacture electric heating components for air conditioners in train systems and shipbuilding as well as preheaters and braking resistors for the drive technology. In the field of separator technology, we manufacture heating elements for the temperature control of different liquids. In all areas we apply the highest standards of high voltage and insulation resistance.

UNIVERSAL HEAT TRANSFER FLUID WITH FROST AND CORROSION PROTECTION PRODUCT DESCRIPTION Antifrogen® N is a monoethylene glycol-based, yellow- colored heat transfer fluid for industrial applications such as hot water heating, cooling and air conditioning systems, heat pump systems and wind turbines, but can also be used in rail vehicles or to fill Clariant leak indicators. Antifrogen® N contains a highly efficient combination of inhibitors that offer long-lasting corrosion protection in your systems. The frost resistance depends on the mixing ratio with water (chloride content <100 ppm, water hardness 0° - 25° dH) and must be at least 20% v/v Antifrogen® N (corresponds to frost protection down to -9 °C). Antifrogen® N is free of nitrite, amine, borate, phosphate and silicate , and contains neither CMR substances (Cancerogenic Mutagenic

UNIVERSAL HEAT TRANSFER FLUID WITH FROST AND CORROSION PROTECTION PRODUCT DESCRIPTION Antifrogen® N is a monoethylene glycol-based, yellow- colored heat transfer fluid for industrial applications such as hot water heating, cooling and air conditioning systems, heat pump systems and wind turbines, but can also be used in rail vehicles or to fill Clariant leak indicators. Antifrogen® N contains a highly efficient combination of inhibitors that offer long-lasting corrosion protection in your systems. The frost resistance depends on the mixing ratio with water (chloride content <100 ppm, water hardness 0° - 25° dH) and must be at least 20% v/v Antifrogen® N (corresponds to frost protection down to -9 °C). Antifrogen® N is free of nitrite, amine, borate, phosphate and silicate

The AMD Ultra-Fast Deployable Shelters provide an all-in-one shelter solution, where all equipment (air-conditioning, heating, groundsheet, sunscreen accessories, tools, lighting, generator set) is fitted on a single all-terrain trailer. This makes these shelters ideal for field maintenance operations in remote and hard to access areas. Thanks to their innovative hydraulic shaft system, AMD shelters are quick and easy to assemble with only two operators at ground level, and without the need for specific tools or engines. Their connectable groundsheet means the shelter is fully air- and watertight, while their integrated sunscreen helps limit air-conditioning power consumption.

Electric duct heater Electrical duct heater type “LEH-R” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with adapters to flanges DIN EN 1092 Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

EEx’e’ certified electric duct air heater EEx e T2 – T6 ATEX The “LEH-Exe” type electric heaters comprise a range of certified EEx e air duct heaters, custom built to meet client specifications and suitable for use in zone 1 &amp; 2 hazardous areas. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with flat flanges Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

Electric duct heater Electrical duct heater type “LEH-K” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with flat flanges Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

Electric Air heater Electrical air heater type “LEH-A” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The air heater essentially consist of the following main-components: Process flange Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

Zepter’s Swiss Cosmetics laboratory combines technology with luxury to formulate this incredible new Intensive Repair Body Cream. After the first application, the intensive repairing cream instantly: • Restores the skin, providing a firmer, more energetic and silky look • Effectively prevents & treats Stretch Marks • Intensely nourishes even very dry skin • Protects the skin from pollution, air conditioning, heating • Prevents skin slackening and loss of firmness. Presentation IMPROVE SKIN TEXTURE - PREVENT & REDUCE STRECH MARKS La Danza Intensive Repair Body Cream reveals authentic beauty through a highly innovative Swiss cosmetic formula which delivers constant hydration to the skin. The essential vital and active ingredients build a more resilient skin barrier and boosts your skin’s performance.

Air handler hire to match your needs Our air handling unit system are specifically designed to work with our fluid chillers and boilers to provide cool or warm air for a variety of applications. With a wide range of sizes available, from 50 to 500 kW, we can design and install air handling unit systems to fit any need – whatever your request. Our experienced team offer industrial air handler hire when you need it. We have the know-how to calculate the most complex cooling requirements, giving you a cooling package that will deliver energy and cost efficiencies. Industrial air handling units fitted for you, by our engineers Choosing air handler hire with us means that if you need to circulate air through your existing heating, ventilation and air conditioning (HVAC) systems, we can match our air handlers to your set-up. We’ll also provide all the air handling equipment needed, such as ducting, hoses and cabling as part of our air handler hire service

Heavy industrial contactors are essential components in industrial systems that enable reliable switching and control of electrical loads. At AIS Hensch Automation-Industry-Solution we offer a wide range of high quality heavy industrial contactors designed for demanding applications in various industries. Robust construction for use in demanding environments: Our heavy industrial contactors are specifically designed for use in the harshest environments. They feature a robust construction that ensures reliable performance even under extreme conditions. High switching performance and reliability: Our contactors offer high switching performance and reliability to meet the needs of industrial applications. They are capable of switching large electrical loads and provide stable performance over a long period of time. Versatile Applications: Our heavy duty industrial contactors are versatile and suitable for a variety of applications including motor control

Pump units are largely responsible for the efficient and reliable pumping of liquids in various industrial applications. At AIS Hensch Automation-Industry-Solution we offer a versatile selection of high-quality pump units that have been specifically developed to meet the requirements of our customers. Complete solutions for various applications: Our pump units provide a comprehensive solution for a wide range of applications, be it water treatment, industry, agriculture, construction or other areas. They are delivered as complete units containing all the necessary components for efficient fluid delivery. Tailor-made configurations: We offer pump units in various configurations and sizes that can be customized to meet the specific requirements of our customers. From simple pump sets to complex multiple pump systems, we offer customized solutions tailored to individual needs.

As KMC Group, we serve to automotive main industry, furniture, domestic appliance, steel goods, decoration, heating & cooling, air conditioning, civil works & steel construction, scaffolding profiles, heated towel rack, solar energy systems, and agricultural irrigation & greenhouse industries by specially produced profiles with MEKO Brand. We continue to our stabilized commercial life for over half century, with annually 150 thousand trade capacity of Carbon Steel, Galvanized, Hot Rolled and pre-painted on demand and following the latest technology in order to serve you better. We maintain our quality perspective by performing physical & chemical tests in our own in house laboratories and R&D center, from raw material to finished products, using EC (Eddy Current), leak proof test, zinc spray coating on welding point and internal deburring processes. Your special cut to length requirements can be done in our computer controlled CNC and multi saw lines.

Westron R407 C a Non-Ozone Depleting, Non-Toxic, Non-riammable Refrigerant developed for Residential and Commercial Air-conditioning applications. Westron 407C can also be replaced with R22 and also used as a Retrofit refrigerant with R22. Widely used in Residential and Commercial Air-conditioning systems, Non flooded Evaporator Chillers, Heat Pumps, Unitary Air-conditioning Systems. Westron 407C also used to replace R22 Refrigerant in existing Medium Temperature Commercial refrigeration Systems including Supermarket display cases and other similar refrigeration eguipment. Westron 407C is a HFC Zeotropic blends of three refrigerants namely R 134a (52 %), R 125 (25%) and R 32 (23%). In the case of R22 Retrofit refrigerants if there is any efficiency loss equipment design modification is required with some changes.