Heating and cooling systems- - Import export

Because of the complexity of controlling both parameters, every project is designed according to dimensions, material of the case, target values as well as ambient extremes in temperature and humidity. Although we do not have standard, off shelf units we are offering: Maxi T – Large units to control temperature and humidity inside the medium size cases (5-10 cubic meters) where main generator is located inside the machine room or other technical area some distance from the display case. See below. Mini T – small, compressor based unit for installation under or behind the display case. This unit can work with venting type or cooling/heating panels system. Will work with our Mini One or sometimes PMCG units. Special, thermoelectric device for very small cases. Will work with our PMCG unit. Please note that controlling temperature and humidity requires some changes to display case design and its very hard if not impossible

The KASAG sterile containers, mixing tanks are used for preparing and mixing of products in the food industry. The container is equipped with a mixing device and jacket for heating and cooling. The entire system is built on a frame with a control unit and weighing cells.

The wastewater in the sewers is an ideal source of energy when combined with heat pumps and cooling machines, for heating and cooling of buildings. Per our experience, the minimal requirements for such a plant include: a wastewater flow of approx.. 10 l/s a wastewater temperature level of about 10°C a power requirement from 100kW (for heating and cooling from ca. 50kW). During the course of conveying wastewater to the sewage treatment plant, there are many possibilities for exploiting thermal energy. Wastewater can also be used many times over consecutively as energy source. Despite new inflows, or the confluence into larger canals, but also through heat influx from cooling systems, the change in temperature of the wastewater is mostly marginal. Innovative cities have ready energy guidelines (energy plans), based on which you can orient yourself to find out whether there is a suitable wastewater canal in your near vicinity (maximally approx. at a distance of 200 m).

The wastewater in the sewers is an ideal source of energy when combined with heat pumps and cooling machines, for heating and cooling of buildings. Per our experience, the minimal requirements for such a plant include: a wastewater flow of approx.. 10 l/s a wastewater temperature level of about 10°C a power requirement from 100kW (for heating and cooling from ca. 50kW). During the course of conveying wastewater to the sewage treatment plant, there are many possibilities for exploiting thermal energy. Wastewater can also be used many times over consecutively as energy source. Despite new inflows, or the confluence into larger canals, but also through heat influx from cooling systems, the change in temperature of the wastewater is mostly marginal. Innovative cities have ready energy guidelines (energy plans), based on which you can orient yourself to find out whether there is a suitable wastewater canal in your near vicinity (maximally approx. at a distance of 200 m).

Sealant and lubricant for cold and hot-water valves in plumbing and heating sector, in vehicle heating systems or cooling circuits, ground seals on glass taps and desiccators For lubricating O-rings and rubber seals during assembly and operation, as well as plastic parts of all kinds Advantages and benefits Highly effective due to excellent adhesion on all materials Neutral behaviour with regard to plastics and elastomers Consistent properties without drying out, hardening or bleeding Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Furthermore, the system enables an increased flow rate. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Classification number - Filter aid without Filtration degree 30-100 µm Medium oil, emulsion and water Filter material filter belt

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Interest in our products? Contact us! Download product brochure Classification number - Filter aid with Filtration degree 30-40 µm Medium oil, emulsion and water Filter material non-woven fabric

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Interest in our products? Contact us! Download product brochure Classification number - Filter aid with Filtration degree 30-40 µm Medium liquids of the chemical industry Filter material non-woven fabric

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Furthermore, the system enables an increased flow rate. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Classification number - Filter aid without Filtration degree 30-100 µm Medium liquids of the chemical industry Filter material filter belt

Sealant and lubricant for cold and hot-water valves in vehicle heating systems or cooling circuits and for ground seals on glass taps and desiccators Lubrication of O-rings and rubber seals for assembly and during operation Lubrication of plastic parts Advantages and benefits NSF H1 registered Tasteless and odourless Highly effective due to excellent adhesion on all materials Neutral behaviour with regard to plastics and elastomers Completely EPDM-compatible High long-term stability without drying out, hardening or bleeding Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol MOSH/MOAH-free

In heating mode 1, it has a capacity of 15.88kW and an efficiency of COP 4.36 at a hot water output of 35°C in 7°C outdoor air. In heating mode 2, it has a capacity of 14.98kW and COP 3.38 efficiency at 45°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 12kW and an efficiency of EER 2.56 at 7°C water output in 35°C outdoor air. Capacity 16kW Circulation Pump External Compressor: Panasonic Scroll Operating Modes: Heating-Cooling-Hot Water Power Supply: 380-420V Refrigerant: R407C Product Dimensions W/D/Y: 1360/500/1160 Total Weight (kg): 148 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 38.01kW and an efficiency of COP 4.32 at a hot water output of 35°C in 7°C outdoor air. In heating mode 2, it has a capacity of 36.33kW and an efficiency of COP 3.38 at 45°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 26.75kW and an efficiency of EER 2.50 at 7°C water output in 35°C outdoor air. Capacity 46kW Circulation Pump External Compressor: Panasonic Scroll Operating Modes: Cooling, Heating, Hot Water Power Supply: 380-420V Refrigerant: R407C Product Dimensions W/D/Y: 1030/953/1003 Total Weight (kg): 310 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 31.67kW and an efficiency of COP 4.28 at a hot water output of 35°C in 7°C outdoor air. In heating mode 2, it has a capacity of 30.04kW and COP 3.32 efficiency at 45°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 22.39kW and an efficiency of EER 2.49 at an outdoor air temperature of 35°C and a water output of 7°C. Capacity 39kW Circulation Pump External Compressor: Panasonic Scroll Operating Modes: Cooling, Heating, Hot Water Power Supply: 380-420V Refrigerant: R407C Product Dimensions W/D/Y: 1030/953/1003 Total Weight (kg): 270 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 21.93kW and an efficiency of COP 4.30 at a hot water output of 35°C in 7°C outdoor air. In heating mode 2, it has a capacity of 20.44kW and an efficiency of COP 3.35 at 45°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 15.53kW and an efficiency of EER 2.56 at 7°C water output at 35°C outdoor air. Capacity 26kW Circulation Pump External Compressor: Panasonic Scroll Operating Modes: Cooling, Heating, Hot Water Power Supply: 380-420V Refrigerant: R407C Product Dimensions W/D/Y: 927/803/1003 Total Weight (kg): 210 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems,. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 12.32kW and an efficiency of COP 4.25 at a hot water output of 35°C in 7°C outdoor air. In heating mode 2, it has a capacity of 12.02kW and COP 3.25 efficiency at 45°C hot water output at 7°C outdoor air. In cooling mode, it has a capacity of 9.28kW and an efficiency of EER 2.53 at 7°C water output in 35°C outdoor air. Capacity 13kW Circulation Pump External Compressor: Panasonic Scroll Operating Modes: Cooling, Heating, Hot Water Power Supply: 380-420V Refrigerant: R407C Product Dimensions W/D/Y: 717/753/803 Total Weight (kg): 135 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 16.20kW and an efficiency of COP 4.31 at a hot water output of 35°C in 7°C outdoor air. In heating mode 2, it has a capacity of 15.33kW and COP 3.41 efficiency at 45°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 12.15kW and an efficiency of EER 2.73 at 7°C water output in 35°C outdoor air. Capacity 16kW Circulation Pump External Compressor: Copeland Scroll Operating Modes: Heating-Cooling-Hot Water Power Supply: 380-420V Refrigerant: R407C Product Dimensions W/D/Y: 1360/500/1160 Total Weight (kg): 148 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 12.92kW and an efficiency of COP 4.34 at a hot water output of 35°C in 7°C outdoor air. In heating mode 2, it has a capacity of 12.56kW and COP 3.43 efficiency at 45°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 9.57kW and an efficiency of EER 2.77 at 7°C water output in 35°C outdoor air. Capacity 12kW Circulation Pump External Compressor: Copeland Scroll Operating Modes: Heating-Cooling-Hot Water Power Supply: 380-420V Refrigerant: R407C Product Dimensions W/D/Y: 1360/500/1160 Total Weight (kg): 138 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode, it has a capacity of 7.2-21.8kW and COP 4.61 efficiency in 7°C outdoor air and 35°C hot water output. In cooling mode, it has a capacity of 6.4-16.7kW and an efficiency of EER 3.24 at 7°C water output in 35°C outdoor air. Capacity 22kW Circulation Pump External Compressor: Mitsubishi DC Scroll Operating Modes: Cooling, Heating, Hot Water Power Supply: 380V Refrigerant: R410A Product Dimensions W/D/Y: 1200/540/1750 Total Weight (kg): 210 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode, it has a capacity of 24.3-60.8kW and COP 4.64 efficiency at 35°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 13.4-47.1kW and an efficiency of EER 3.26 at 7°C water output in 35°C outdoor air. Capacity 65kW Circulation Pump External Compressor: Mitsubishi DC Scroll Operating Modes: Cooling, Heating, Hot Water Power Supply: 380V Refrigerant: R410A Product Dimensions W/D/Y: 1210/1090/1400 Total Weight (kg): 405 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode, it has a capacity of 13.6-39.8kW and COP 4.62 efficiency in 7°C outdoor air and 35°C hot water output. In cooling mode, it has a capacity of 12.1-31.3kW and an efficiency of EER 3.23 at 7°C water output in 35°C outdoor air. Capacity 40kW Circulation Pump External Compressor: Mitsubishi DC Scroll Operating Modes: Heating-Cooling-Hot Water Power Supply: 380V Refrigerant: R410A Product Dimensions W/D/Y: 1210/1090/1400 Total Weight (kg): 400 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode, it has a capacity of 5.4-15.63kW and COP 4.72 efficiency at 35°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 4.6-11.8kW and an efficiency of EER 3.23 at 7°C water output in 35°C outdoor air. Capacity 16kW Circulation Pump Built-in Compressor: Panasonic-Sanyo Operating Modes: Cooling, Heating, Hot Water Power Supply: 220V Refrigerant: R32 Product Dimensions W/D/Y: 1215/500/830 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode, it has a capacity of 4.18-12.1kW and COP 4.68 efficiency at 35°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 3.74-9.6kW and an efficiency of EER 3.19 at 7°C water output in 35°C outdoor air. Capacity 12kW Circulation Pump Built-in Compressor: Panasonic-Sanyo Operating Modes: Cooling, Heating, Hot Water Power Supply: 220V Refrigerant: R32 Product Dimensions W/D/Y: 1215/500/830 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

Purity and Quality Control: High purity refrigerant gases are manufactured and stored under stringent quality control measures, ensuring that the gas is free from impurities, contaminants, or unwanted byproducts. This purity is essential for the optimal performance and efficiency of refrigeration systems.2. Efficient Heat Transfer High purity refrigerart gases facilitate efficient heat transfer in cooling systems. Impurities and contaminants can hinder heat transfer, leading to reduced system efficiency and increased energy consumption.3. Environmental Compliance: Many high purity refrigerant gases comply with environmental regulations, especially those related to ozone layer protection and glooal warming potential. They are designed to have minimal or no impact on the environment, making them environmental^ friendly choices.Energy Efficiency: Using high purity refrigerants contrioutes to the overall energy

Floor heating systems

The range of our products includes control cabinets enclosures for indoor and outdoor applications only from the most reputable European brands. Our cabinets are equipped with 3 mm thick mounting plates which allows us to mount even the most demanding equipment without losing the flexibility of the plate. The skeleton construction of enclosures based on closed profiles allows their unlimited expansion and joining switchboards in series. The devives used by us in every switchgear is feature durability and compactness. These are exclusively products of market-leading manufacturers such as SIEMENS, SCHNEDIER, Rittal or EATON. Besides, depending on their location, we install heating or cooling systems in each cabinet. We offer our clients a comprehensive service, starting from the design and construction of a control cabinet through its installation and commissioning.

The Rotor B4-2L represents an impressive blend of engineering acumen and high-quality materials, offering robust performance and long-term durability. With a compact design, it manages space and functionality efficiently, making it suitable for industries grappling with space constraints. Constructed from wear-resistant materials, the B4-2L operates optimally at high rotational speeds, maintaining stability and resisting heat effectively. Its innovative cooling system aids in preventing overheating, thereby extending its lifespan and maintaining consistent performance levels. One of its notable features is its low vibration and noise output, making it an ideal choice in noise-sensitive applications. Its low-maintenance design further reduces operational downtime, thus enhancing overall productivity.

The Rotor D8-1.5, designed with a perfect balance of advanced engineering and top-grade materials, offers robust performance and durability. Its compact form allows optimal functionality without compromising on space, ideal for industries where space is a concern. Made from wear-resistant materials, it operates efficiently at high rotational speeds, resisting heat and maintaining stability. An integrated cooling system prolongs its lifespan and sustains consistent performance. Notably, it generates low noise and vibration, while its low-maintenance design enhances productivity. The D8-1.5 excels in torque transfer, offering smooth operation and superior energy conversion efficiency. This rotor is a reliable choice for various applications, ensuring high returns and operational efficiency.

* Silent and vibration-free operation in all surgical procedures * Durable and UV Protected Design * Color Coded Vacuum Indicator * Easy to use with foot pedal * 39.4 dB Sound Level * Overflow Protection System * Maintenance Free Oil Free Pump * Design Suitable for Continuous Operation * Easy Access Between Jars * Cooling with extra fan against heating

The specified indivdual work steps, coupled with the best technical equipment, give the customer the assurance for a high quality product made in Germany. Through its unique selling pro position in term of the accoustic sound and fire protection properties, the system stands out clearly from the rest of the market and offers unpreceden ted opportunities. Modular system for substantially shorter installation times. Unique sheetpanelled acces floor system for intensive installation areas for example stages, lecture halls or congress centers. Prefabricated vents in the plasterboard covering for the integration of heating and cooling systems has the advantage of shorter installation times on site, as well as reduced overall assembly height. A uniform air distribution is ensured by source air outlets or perforated louvres. Drilling and milling for the subsequent assembly of chairs, lighting and ventilation outlets are already prefabricated.