Hot air generators for industrial use - Import export

Drying processes with hot air generators fully configurable in flow and air pressure AGM hot air generators are units that work completely autonomously, they do not need heat dissipative elements, which reduces acquisition and installation costs. They can run on diesel, natural gas or propane gas and their function is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated or dried. Its design allows the application of all types of low, medium or high pressure fans according to the needs of each installation. The main advantages over other heating systems are: - Reduction of acquisition and installation costs. - Very fast heating or drying system. - Air diffusion can be direct or a network of ducts can be applied. - 90% combustion efficiency. - Possibility of supply with low, medium or high pressure fans.

Outdoor hot air generator for the heating of tents, covered swimming pools, etc. POOL MANN hot air generators are a perfect solution for the heating of closed premises where a heating system is required where the heat generating equipment must be located outside the room to be heated. Its operation can be diesel, methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - 90% combustion efficiency.

Industrial warm air heater with diesel or gas operation from 26 to 500 kW The MM hot air generators are indirect heating type equipment (the hot air does not mix with the combustion gases) and they work completely autonomously. They do not need additional elements for heat dissipation, a fact that reduces acquisition, installation and maintenance costs. Its operation is based on the heating of a certain air flow, through the combustion of diesel, natural gas or propane gas. Said flow is aspirated and driven by the fans that the equipment incorporates and that comply with the ERP 2020 regulations. The main advantages over other heating systems are: - Reduction of acquisition and installation costs - Very fast heating system - Air diffusion can be direct or a duct network can be applied - 90% combustion efficiency

Our modules to increase the air temperature incorporate a combustion chamber and heat exchanger with high thermal performance, it has an insulated exterior paneling and a temperature control panel to order the start and stop of the burner and the fan. Our modules to increase the temperature are designed to be applied in drying process facilities where it is required to increase the temperature of the air driven by an external air fan. Depending on the air flow, the thermal increase can range from 20ºC to 60ºC. The air flow treated by the equipment can range from 2,150 m3/h to 18,000 m3/h depending on the selected model. The fuel used by the burner can be diesel, natural gas or propane gas.

Hot air heaters with gas operation from 23 to 34 kW The K gas hot air heaters are units that work completely autonomously, that is, they do not need heat dissipative elements, which reduces acquisition and installation costs. Its operation can be methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - They do not take up space on the floor. - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - Combustion efficiency greater than 90%.

The ECO POL industrial wood stoves are designed for fast and efficient heating of all types of industrial, agricultural and livestock premises. The equipment incorporates a large combustion home where firewood or woody waste is introduced, once the combustion is carried out, the gases come into contact with a heat exchanger where heat transfer occurs with the air driven by a fan. The hot air is diffused in the room to be heated, obtaining a very fast and efficient heating system. With our industrial wood stoves, you will obtain a fast and efficient heating system, taking advantage of the woody waste produced in the manufacturing tasks (wooden pallets, wooden boxes, cardboard boxes, etc.). We have two models that provide a heat output of 50 and 100 kW that allow heating of 300 to 600 m2.

Industrial wall mount heater with diesel operation The GS wall-mounted industrial heaters are units that operate completely autonomously, that is, they do not need heat dissipating elements, which reduces acquisition and installation costs. Its diesel operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - They do not take up space on the floor. - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air in adjoining areas where the equipment has been installed. - Efficiency of combustion of 92%.

Heating of greenhouses and large areas with diesel or gas hot air generators The hot air generators for greenhouses of the AM series are equipment that works completely autonomously, that is, they do not need heat dissipating elements, which reduces acquisition and installation costs. Its operation can be diesel, methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - 90% combustion efficiency.

Electric heaters for any type of premises RP PROFESSIONAL electric heaters or heaters are robust and with the best components to obtain a fast, efficient and durable electric heating system. All models include, as standard, an ambient thermostat to start and stop the equipment once the desired temperature has been reached in the room and in this way optimize energy consumption. The 30 kW model can be applied to an external room thermostat with 10m of cable in case you want to control the room temperature at a point away from the equipment. Constructive details - Armored electrical resistance AISI 321 of high thermal exchange - Built-in room thermostat - Power selector - 1.5m electrical connection cable - Manual reset safety thermostat - Front protection grid - Channel up to 6m (except RP 33 M model) - Possibility of stacking several teams

Powrmatic SRP U-Tube Radiant heater

Powrmatic CPx 360kW Gas Fired Cabinet. Upright. Horizontal and External Cabinet Heaters also available

They are the most economical and correct solution hot air generators for large volume spaces where ambient air should be heated. High efficiency, Homogeneously heat distribution in a short time, Ease to assemble and execute, Economic, Long life, Investment and operating costs are lower than, Electronic ignition system heating system with boiler and tubing system Technical Features Model Sirokko 50 Sirokko 60 Sirokko 70 Nominal Thermal Power (kW) 47,5 57 66,5 Natural gas Consumption (Nm3/sa) 5 5 7,5 Heating Area (m2) 200-400 250-500 325-650