Hydraulic control units - Import export

shock dampening for low operating noise levels thanks to a heavy overall frame and the sturdy, warpresistant design with heavy doublepost guides even toughest materials can be cut smoothly with adjustable blade clearance for a most precise cut at any thickness very precise blades made of special steel high operating safety through material guide at entrance and protective cover springactuated hold down clamp (from 250 mm stock width) top/bottom dead center control to monitor blade position counter control mounting bracket hydraulic power units in different sizes electrical control

The HZ series lifting platforms are lifting equipment to be installed in a fixed position and are operated by an electrohydraulic control unit. Manufactured according to the anti-accident guidelines, they consist of two lower and upper planks and a pantograph system operated by a hydraulic cylinder. TECHNICAL FEATURES: Sturdy structure Construction according to CE safety standard Top plate in smooth sheet Aluminum safety perimeter on the top deck European production hydraulic control unit, positioned externally, designed for intermittent use of 30% Pushbutton with low voltage controls Hydraulic system with overload safety valve Control valve for descent speed Over-dimensioned hydraulic cylinder with anticadut valve in case of pipe breakage Safety distance between the arms of the pantograph Self-lubricating sleeves Removable lifting hooks for transport and installation Yellow color RAL 1028 painting

The HD series lifting platforms are lifting equipment to be installed in a fixed position and are driven by an electro-hydraulic control unit. The double pantograph structure allows a high stroke and reduced overall dimensions (only the minimum height increases). Built according to accident prevention guidelines, they are equipped with a fall protection valve and a safety perimeter. General characteristics: Very robust structure in painted steel Construction according to CE safety standards Upper platform in smooth sheet Aluminum safety perimeter on the upper platform High quality hydraulic power unit, internally positioned, designed for intermittent use of 30% Push-button panel with low voltage controls Hydraulic system with safety valve for overload Control valve for descent speed Oversized hydraulic cylinders with anti-fall valve in case of broken pipes Anti-shearing safety distance between the pantograph arms Joints with self-lubricating bushings

These pumps have been designed according to the most difficult conditions and heavy work.They are high performance pumps with diesel engine and S Valve System. Both models can deliver concrete up to 100 meters vertically or 300 meters horizontally. Both ELKOPOMP S45 & ELKOPOMP S60 are equipped with axle and tires. Thus, it can be easily towed and transported to required points. Moreover, the concrete delivery pipes can be easily assembled and become ready to deliver concrete. The brand of the hydraulic control unit used in ELKON Trailer Type Concrete Pumps is BOSCH-REXROTH (Germany) and the system is an open-circuit hydraulic system. ELKON Trailer Type Concrete Pumps are equipped with high quality and chrome coated concrete delivery cylinders. The system can easily regulate itself with power regulation when it delivers the concrete to higher distance by means of hydraulic pump which has variable flow, power regulation and axial piston.

These pumps have been designed according to the most difficult conditions and heavy work.They are high performance pumps with diesel engine and S Valve System. Both models can deliver concrete up to 100 meters vertically or 300 meters horizontally. Both ELKOPOMP S45 & ELKOPOMP S60 are equipped with axle and tires. Thus, it can be easily towed and transported to required points. Moreover, the concrete delivery pipes can be easily assembled and become ready to deliver concrete. The brand of the hydraulic control unit used in ELKON Trailer Type Concrete Pumps is BOSCH-REXROTH (Germany) and the system is an open-circuit hydraulic system. ELKON Trailer Type Concrete Pumps are equipped with high quality and chrome coated concrete delivery cylinders. The system can easily regulate itself with power regulation when it delivers the concrete to higher distance by means of hydraulic pump which has variable flow, power regulation and axial piston.

shock dampening for low operating noise levels absolutely sturdy and warpresistant body design with heavy doublepost guides to smoothly cut even toughest materials with adjustable blade clearance for a most precise cut at any thickness very precise blades made of special steel high operating safety through material guide at entrance and protective cover springactuated hold down clamp (from 250 mm stock width) top/bottom dead center control to monitor blade position counter control mounting bracket hydraulic power units in different sizes electrical control

Technical data UNI FUTURE with pressure transducer Pressure needs detection with switch-off upon reaching the required working pressure of 20 bis 850 bar Suitable for all tools with a oil flow to 700cm³ With built-in-pressure sensors for enhanced features and advanced settings Jogging for intermittent tool feed Power stepless adjustable, short time possible to 1,2 kW For Network and battery (24/230V) Powerful Li-Ionen battery 24 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy savin mode – Unit switches off 10 minutes after the last activity, or to low battery charge Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatically adjust to 1l/min Size L/B/H: 215 x 165 x 220mm (Handle height 40mm) Weight: ca. 6,9 kg SUPPLIED WITH Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data UNI FUTURE 2050 SCU Also as a drive towards a cutting system Automatic detection with switch-off pressure required for achieving the required operating pressure of 20 bis 700 bar Suitable for all tools with a oil flow to 700cm³ With pressure gauge (1000 bar) and ground connector on the front side With pressure sensors for advanced features Detection tool with speed adjustment to (tool speed 10mm/sec) BG provision to fulfill Optional jogging for intermittent tool feed. Power adjustable,short time possible to 1,2 kW ch Network and battery (24/230V) Powerful Li-Ionen Battery 25,2 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy spaving mode– 10 minuets after the last activity or to low battery condition, switches off the unit Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatic adjustment to 1l/min Size L/B/H: 222 x 168 x 229mm (Handle height 40mm) Weight: ca. 6,9 kg Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data cube with pressure transducer and lock valve Pressure needs detection with switch-off upon reaching the required working pressure of 20 bis 850 bar Suitable for all tools with a oil flow to 700cm³ With built-in-pressure sensors for enhanced features and advanced settings Jogging for intermittent tool feed Power stepless adjustable, short time possible to 1,2 kW For Network and battery (24/230V) Powerful Li-Ionen battery 24 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy savin mode – Unit switches off 10 minutes after the last activity, or to low battery charge Keeps the pressure of max. 850 bar upon actuation of the stop valve Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatically adjust to 1l/min Size L/B/H: 215 x 165 x 220mm (Handle height 40mm) Weight: ca. 6,9 kg The lock valve for pipe crimping tools prevents reduction of oil pressure in the tool. So it is possible to hold hydraulic pressure over not time limited space. Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data ED 100 To drive the nitrogen charging apparat «SL 230 SLG» and all crimping and cutting tools. Designed for continuous use Maximum pressure: 850 bar Delivery volume: up to 0,8L/min Fitting to all tools with oil demand up to 700cm³ Shiftable automatic detection of pressure requirement with switching off at the Essential working pressure from 20 to 850 bar Built in pressure sensor for improved functionality and enhanced adjustment Inching function for interrupted tool infeed Robust housing, operating elements and coupling are built in secured under body top Weight: ca.14 kg Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Hydraulic oil HLP 32/46/68 hydraulic oils with a high level of performance. They are manufactured on the basis of highly refined petroleum base oils with a multifunctional additive package that improves filterability, antioxidant, anticorrosive, antiwear, demulsifying and antifoam properties. Designed for use in hydraulic systems of industrial equipment operating under high mechanical and thermal loads, equipped with servo-hydraulic units, proportional control systems and filter elements with a filtration rating of 3-5 microns.

Major players in the oil and gas extraction industries rely on Fine Tubes for corrosion resistant tubing to protect their control systems and instrumentation. Custom-Made for Corrosive Oil and Gas Environments Thousands of metres beneath the surface of the sea, our high-quality tubes are deployed in control units for hydraulic pumps, measuring devices, subsea manifolds, and templates. Onshore applications include control panels and topside processing facilities. Please note that we have a minimum order value of £10,000.

Power units and Control Systems Ruhfus Systemhydraulik GmbH specialises in the production of special solutions in the field of hydraulic units for industrial use. In order to be able to optimise the product to meet your requirements, you will be supported during the whole project phase by our competent team. Ruhfus Systemhydraulik GmbH can supply hydraulic units with tank sizes of up to 10,000 litres capacity. For this we use DIN oil tanks but also special tanks that are individually adapted to your needs. Here it is immaterial whether the oil tank is made of steel, stainless steel or aluminium. For special designs such as table valves, tank support frames, supporting structures for motor pump units and many more special components connected with your hydraulic unit we are of course likewise the right people to contact. For each of our hydraulic units, 3D models are generated beforehand which can be made available to you. From these you can plan earlier the field piping, possible foundations or building and also transport or other matters in detail. For the drives of our hydraulic units we use standard electric motors with a power of up to 80 kW. On request the motors can also be equipped with a frequency converter. As the valve technology, as well as the oil supply unit, are always subject to customer-specific requirements, limits are always hard to define here. As far as possible only two limits should not be exceeded, on the one hand a maximum volume flow of 275 l/min and on the other a maximum system pressure of 315 bar. Furthermore we can offer you the supply of a complete system of cylinder and hydraulic unit to electric control. If you a seeking a competent partner in the “complete solution” area, we will be glad to support you with our team. 3 D Models

What is a Hydraulic Manifold Blocks? Hydraulic manifold blocks is a hydraulic manifold block made of carbon steel or alloy aluminum. There are many chambers are intergraded inside the hydraulic manifold to meet various requirements in hydraulic systems or install hydraulic valve for modular valves, cartridge valves threaded installation . Hydraulic valve manifold is available to control the fluid direction, hydraulic pressure with hose fittings or adjusting flow rate with its designed chambers and valves. Hydraulic manifold block is easily to maintain, lower cost and standard replacement. Why Our Customers Choose FRIMA hydraulic Manifold blocks: We provide a wild range of manifold blocks for standard of CETOP, NFPF, DIN2430 & ISO4401 or Customized Design available. 100% high quality materials, heavy-duty carbon steel (Pressure Up to Max. 60Mpa(600bar, 8700psi) ) or alloy aluminum (Pressure Up to Max. 21Mpa(2100bar, 3045psi) ) .

Remote controllers with key switches or with key switches and screen-displays for permanent 100 % security, used with all MedicCleanAir units. Remote controller RC 100 with key switches Key switch to select speed. Connects directly to the air purification unit or isolation unit / no seperate power supply needed. Avoids undesirable external use (only hospital staff)

Are stand-alone units that are not built-in for machines. This unit uses fluid to power a machine and transmit power from one location to another. It includes a reservoir of many different shapes and sizes, regulators, a pump, motor, pressure supply lines, and relief lines. Packages have multiple valve connections, which means they can operate a variety of machines using the appropriate valves. Mini power packs, on the other hand, are smaller in size and consist of a wide variety of simple mounts, making them extremely versatile. It offers a compact solution for a multitude of applications, often without the need for tube and reinforcement assembly. It is a functional design product with high performance gear pump and steel or plastic oil tank options. Special production on demand

We have power units at difference dimensions and features

we can form our products as the customer want

Special units 1000 to 50000 liter tank volumes, standard aggregates, motor / pump assemblies, valve stands, storage stations, filter cooling circuits, lubrication systems, engineering and delivery compl. tube sets

Hydraulic

Units for mobile use tend to have more restraints placed on them than standard industrial units. Normally they will not be used continuously and unit weight and overall size envelope can sometimes be critical. 12 & 24 DC, IC engine & standard voltage electric motor options are available.

We have control valves at different dimension and brands.

Tanks for Hydraulic Power Units and mobile Hydraulic or Diesel Tanks

A wide variaty of control units, from Vestas CT unites to Mita-Teknik controllers and specific Dan control parts for Neg Micon and many other controls for Nordex, Vestas and other wind turbine brands.