Hygrometers - Import export

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !!

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !!

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !!

Trotec presents T260 Infrared-Thermohygrometer. It has been designed and made as per the highest German quality standards. It has a high readability display. The DP mode provides simultaneous display of the dew point and surface temperature. Once the wall temperature is approaching or is lower than the dew point temperature, the user is warned by the T260 through an alarm tone and an optical laser signal. This alert function facilitates quick investigation of surface and detection of weak spots. The user can individually configure these alert states. Using a USB cable, T260 thermohygrometer can be connected to a PC. It provides MultiMeasure Studio Software, which is freely available in the downloads segment of uk.trotec.com. The software enables real-time transfer of T260's measured values both online and to the PC. Thus the values can be stored for analysis or reporting at a later stage. It has a continuous glass surface, which can be cleaned with ease.

This measuring device is ideal for the fast determination of humidity rate in solid substances such as wood and building construction materials.

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !!

Grain moisture meter METRINCO M150G is designed for fast and accurate measurement of moisture content and temperature of grain crops - sunflower, wheat, barley, corn, rape, oats, soybeans, buckwheat, peas. The moisture tester is based on the dielcometric measurement method, which ensures high sensitivity and accuracy of the device, and the considerable length of the probe allows you to make measurements at different depths of the material.

Key features and advantages of the METRINCO M131SD sawdust moisture tester (in comparison with similar devices): The METRINCO M131SD moisture tester does not require pressing sawdust, which significantly reduces the measurement time and does not lead to wear of rubbing parts, such as the lid and cup of the measuring chamber. The dielcometric measurement method ensures an error of no more than 1 % moisture content. To take a measurement, simply immerse the knife-shaped sensor in sawdust and wait for the measurement result to appear on the screen. Thanks to its fast measurement speed, this moisture tester can be used to control technical processes, in production lines, during raw material acceptance, etc. The high accuracy of the device has been confirmed in the laboratory and in practice. The METRINCO M131SD wood sawdust moisture tester is manufactured in Ukraine, which greatly simplifies obtaining technical support from the manufacturer.

Key features and advantages of the METRINCO M130G grain moisture tester (in comparison with similar devices): The METRINCO M130G moisture tester does not require grain compression, which significantly reduces the measurement time and does not lead to wear of rubbing parts, such as the lid and the measuring chamber cup. To take a measurement, simply immerse the paddle-shaped sensor completely in the grain and wait for the measurement result to appear on the screen. Thanks to its fast measurement speed, this grain moisture tester can be used in process control, in production lines, during raw material acceptance, etc. The high accuracy of the device has been confirmed in the laboratory and in practice. The METRINCO M130G grain moisture tester is manufactured in Ukraine, which greatly simplifies obtaining technical support, service and free firmware updates (number of grain crops) from the manufacturer.

It is designed for fast and accurate measurement of wood moisture, including lumber, treated and untreated timber, as well as building materials - concrete, screed, cinder block, plaster, tiles, bricks, sand, etc. It is the most popular universal moisture meter in our range. Thanks to a special spring sensor, the device can measure the moisture content of materials with a rough surface while maintaining high measurement accuracy. The M120W moisture meter can also measure materials under non-conductive surfaces, such as painted or polymer-coated boards, concrete under linoleum, moisture content of materials in PVC bags, etc. The moisture meter operates on a dielcometric principle. To make a measurement, you need to attach the sensor plates of the device to the object of measurement and wait for the device to stabilise. Features of the Metrinco M120W moisture tester: wide measuring range: 0...80 % depending on the material group high accuracy of the device: 1,5 %.

Designed for quick and accurate measurement of moisture and temperature of sawdust, wood chips, wood chips and other bulk waste from the wood industry. The moisture tester is based on the dielcometric measurement method, which ensures high sensitivity and accuracy of the device, and the long probe length allows you to make measurements at different depths of the material. Features and benefits of the METRINCO M151SD wood sawdust and wood chip moisture tester: The device does not require pressing of the sample, which significantly reduces the measurement time and does not lead to wear of rubbing parts, such as the lid and the measuring chamber cup. The dielcometric measurement method provides an error of no more than 1% moisture content. The active zone of the sensor is located at the end of the probe, which means that it is possible to determine the moisture content and temperature of bulk wood waste at a specific depth.

Wide range of soil moisture measurement: 8 ~ 100 % depending on the soil type. High measurement accuracy of the device: ±0,5 %. Number of predefined soil type groups: 3 (sandy soil, black soil, peat). Number of user groups: 4 (can be adjusted by the user to any type of soil by means of calibration). English-language interface. The device has an ergonomic design and a robust ABS plastic case for use in the field. Large backlit LCD display for easy reading of readings. The moisture meter is equipped with a 165 mm long penetrating probe. Operating conditions: air temperature 0 ~ 60 °C, relative humidity 0 ~ 90 % RH. Power supply: 3 1.5 V AAA batteries. Possibility of metrological calibration of the device (optional).

METRINCO M121P is a professional SHF moisture meter for paper in rolls and stacks, as well as for cardboard and cardboard products. The device is designed to take quick and accurate measurements of moisture content in paper, including filtering, corrugated and creped paper, as well as in cardboard of various thickness, density and number of layers. METRINCO M121P moisture meter for paper and cardboard utilizes the dielcometer measurement method. In order to perform measurements, put the device’s sensor plates against to the object of measurement and wait for the moisture meter readings to stabilize. Due to a specifically designed spring sensor, the device is able to measure moisture content of materials with uneven or rough surfaces with high measurement accuracy. The device is also able to measure moisture content in materials under non-conductive surfaces, e.g. moisture content of paper in PVC packaging without unpacking thereof, etc.

It is equipped with an impact (hammer) type sensor with 45 mm long insulated needles (length of the penetrating part: 30 mm, diameter of the penetrating part: 3.5 mm). Model 140W differs from the similar model M141W in the lack of an infrared pyrometric sensor, which is used for non-contact measurement of wood temperature and allows for automatic temperature compensation during measurement. Instead, the M140W model requires manual adjustment of the wood temperature. Features of the Metrinco M140W wood moisture meter: wide measuring range: 4...140 % depending on the material group high accuracy of the device: 0,5 % total number of wood types: 192, grouped into three classes. English language interface high-quality ABS plastic case with a protective silicone (rubber) cover screen backlight

The METRINCO M118W moisture tester is designed to measure the moisture content of wood in a non-destructive manner. The moisture meter is designed to measure the moisture content of processed wood (planed board or beam, finished wood products, etc.). It has the highest measurement accuracy among our line of non-destructive wood moisture meters (in practice, the accuracy is better than 1%). It is designed to work with wood up to 8 mm thick. Suitable for measuring the moisture content of veneer and lamellas. This model has a dielcometric method of measuring wood moisture content - the test sample is not damaged during testing. To take a measurement, simply place the device on the surface with the sensitive sensor and wait for the readings to stabilise. Features of the Metrinco M118W: The device can determine the moisture content of wood products in the range from 0 to 40% with very high accuracy.

Over time, various factors such as exposure to contaminants, age, incorrect operation, sensor deterioration, a drift in electronics or exposure to corrosive gases, can contribute to dewpoint instruments losing accuracy and reliability. To maintain accuracy and reliability, we advise an annual service and calibration. For instruments used in critical applications or aggressive environments, more frequent service and calibration intervals are recommended. Our Calibration Laboratory Engineers perform routine servicing, commissioning, fault finding, repairs and installation services in accordance with our accredited quality system. Our calibration range of -90 °C to +20 °C dewpoint is traceable to National and International Humidity Standards at the National Physical Laborarory (NPL). SHAW products are developed to be reliable, easy to install and simple to operate, We are committed to providing the highest quality products and services for accurate and reliable moisture measurement.

Manufactured in the UK, the SDH-PSS is an effective, self-contained sampling system designed for gas or general compressed air sampling, ensuring sample pressure and flow are suitable for trace moisture measurement. Its compact size means it can be taken as close as possible to the sampling point thereby minimising the volume of the sampling arrangement. Simple to setup and install. Fully configurable with options for a filter unit and pressure regulator on a chassis made from high quality stainless steel with stainless steel fittings and pipework. Designed to condition pressurised gas samples up to a maximum of 200 barg (2,900 PSI), Various configurations are available. The hygrometer docks securely in the sample system, which sits in a rugged, anti-static, foam padded carrying case with rubber feet. With no stored energy components, the SDH-PSS is suitable for use in hazardous areas when paired with the SDHmini-Ex, making this an all in one, dewpoint measurement and sampling system.

Accurate, reliable and easy to use for spot check measurements of trace moisture in gases and compressed air. The SADP portable dewpoint meter utilises the proven SHAW ultra high capacitance aluminium oxide moisture sensor, which is fast responding, reliable and accurate with an overall range of -100 to +20 degrees Celsius dewpoint. Incorporating the unique desiccant dry down head assembly and AutoCal function, means the sensor is kept dry between tests, giving the operator a meaningful reading in 5-10 minutes. The SADP indicates dewpoint temperatures in degrees Celsius (°C) dewpoint, degrees Fahrenheit dewpoint (°F) and parts per million (ppm(v)) on a large, easy to read, analogue display. Certified intrinsically safe to ATEX and IECEx standards traceable to the National Physical Laboratory (NPL), the SADP is suitable for use in hazardous environments and for a wide range of industries including power generation, semi-conductor manufacture and pharmaceuticals.

A hand held hygrometer suitable for a wide range of industries. Designed for quick, reliable spot check measurements of trace moisture in gases and dry compressed air. Utilising the proven SHAW ultra high capacitance aluminium oxide sensor, desiccant dry down head assembly and AutoCal function. The intuitive menu system allows simple operation of the instrument and can be viewed in 10 different languages, has real time graphing, screen shot features and selectable engineering units. The rechargeable lithium-ion battery provides over 150 hours of continuous operation on a full charge and the instrument is charged via USB or a plug type to suit your geographical location. Incorporating Bluetooth interfaces for connectivity and printing and advanced data logging with download to PC capability, up to 300,000 readings can be captured and displayed via USB. Suitable for use in hazardous environments, the SDHmini-Ex is certified intrinsically safe to ATEX, IECEx and UL standards,

Shaw Moisture Meters supply sample systems to assist with sampling direct from process lines, protecting your hygrometer from high pressures and contaminants particularly in hydrocarbon applications. These engineered solutions extract and analyse a representative sample of the air or gas, which is then either vented off to atmosphere or returned to the process. The SHAW range of sample systems has been developed throughout 60 years of experience in industrial moisture analysis and process applications. Built using the highest quality components to provide long term performance and reliability even in the toughest applications. Choose from an add on sample system suitable for your portable hygrometer, dewpoint meter, online analyser or contact us regarding a complete all-in-one system designed for your specific requirements.

The RH1 air thermo- hygrometer is an easy-to-use device for the rapid determination of the relative and absolute air humidity as the dew point temperature of the surrounding air. In addition, by storing the device at wood or paper, the equilibrium moisture content (EMC) and the water content in the material can be determined. At the same time the current temperature - optionally in °C or °F - is displayed by each measurement. The measuring range of the RH1 thermo- hygrometer is between 0 and 100% relative humidity at a resolution of 0.1%. The calibrated measurement range, in which the measurement is within the defined tolerance limits, ranges from 10% to 90% of the relative humidity, where the accuracy of ±1.5% of relative humidity (at 25 ° C) is reached. The temperature measurement range is from -10 to +60 ° C or 14 to 140 ° F, at a resolution of 0.1 ° C. The accuracy is ± 0.4 ° C.

The LF-TA transmitter of Schaller measurement instrumentation, with its robust and easy to mount aluminium housing, is best suited for all applications in this field. For temperatures of up to 60°C for laboratory, climate control and drying technology, wood processing industry, food and animal feed industry, building industry, printing and paper industry, agriculture, biotechnology and pharmaceutical industry.

Hygromètre à miroir refroidi (Chilled Mirror Moisture Analyzer), modèle Optisonde/Optica avec miroir refroidi 1111H / D2 / 1311-DR etc.

0 100%RH datalogger up to 38,000 samples Functions Max, Min and Avg

Based on the combined humidity and temperature sensor SHT21 by Sensirion we offer you the DKRF310XXS probe. The sensor is either integrated into a miniaturized stainless steel sleeve (d=4mm, l=20mm) or can be delivered as a tube probe. It provides an I2C output signal.

The micro-module DKRF4002 is designed for humidity measurements withing the range of 0...10%. Its humidity sensor offers high accuracy and excellent long-term stability and was specifically developed for OEM applications which require a RS232 interface Signals both for temperature and relative humidity can be output through the serial interface. Two models differing in measuring accuracy are available: DKRF4002 with +/-3.5RH and DKRF4002-P with +/-2%RH.

The humidity sensor DKRF4001 comes with two analog outputs. Its micro-module is specifically designed for OEM applications. High accuracy as well as excellent long-term stability are among its features. The calibrated, linear outputs offered are 0..1/0..5/0..10VDC. The sensor modules can perform measurements at 0...100%RH and between -20...+80C. With the right configuration measurement applications which demand higher temperatures can be performed.

The DKRF300 and DKRF300-0835 probes are based on the combined humidity and temperature Sensor SHT75 by Sensirion. Their filter protects the sensor against splash water and dust. Being of robust design the stainless steel probe body offers additional protection. This humidity/temperature sensor provides the digital two-wire signal by Sensirion (see SHT75DK data sheet for further information).

SHT75DK Digital, High Precision Sensor for Humidity and Temperature The digital humidity sensor SHT75DK comes fully calibrated and is easy to install thanks to its pin-type package (for 1.27mm sockets). Individual calibration and digital output make it a fully exchangeable option and also spare you the painful and intricate recalibration after changing it. Its sensor head is connected to the pins only through a thin bridge isolating it thermally which further improves its response time. A sealing ring in front of the pins protects against humidity and corrosion. The sensor element can completely seal openings with a diameter of 7mm.