Industrial connector - Import export

Connectors made by Axon’ Mechatronics are tailor-made. They are designed to be : -assembled to PCBA through different kinds of processes : wave soldering, reflow soldering or solderless solution. -assembled on Flat Flexible Cables or Flat Print Circuits with different processes : soldering, crimping, locking. -terminated to wire by welding or crimping. -assembled by electrical welding

Adopting Ethernet standards from the office environment into the industrial world has opened up new perspectives for automation technology. From control level via factory networking to field level, communication has to be provided with high transmission rates and in real time in order to enable remote maintenance and control of complete plants and systems via networks. However, the precondition is robust and high-quality connection technology.

With the LogTag ST100J external sensor you measure temperatures in places where a temperature logger cannot go. The external sensor is made of stainless steel and equipped with high-quality connectors and an industrial PTFE cable. Because of the high quality of the material the external sensor is FDA approved and safe to use for foodstuffs.

With the LogTag ST100K external sensor you measure temperatures in places where a temperature logger cannot go. The external sensor is made of stainless steel and equipped with high-quality connectors and an industrial PTFE cable. Because of the high quality of the material the external sensor is FDA approved and safe to use for foodstuffs.

High-performance connectors, signal connectors and several thousands of connector components – the range of industrial connectors in stock allows igus to provide a high level of availability with short delivery times. - Fast delivery - High level of availability - 100% tested and with warranty - Useful tools such as for crimping - Can also be harnessed with cables - Quantities from 1 to high volume production

The “casing” sector for the electro and electronics industry was developed as a result of demand from the lighting industry for transformer housing for NV lights. Here we can emphasise our housings for electronic mounting devices. Individual customer requirements can be realized cost-efficiently by using insert adapters. Other products for the electrical industry are connectors, strain relief and cable fastening.

Product Name: copper tube Material: T2 TP2 TU2 Specification: 10-1000mm Grade: C12000 /C11000 Length: as required Cu (Min): 99.90% Alloy Or Not: Non-alloy Ultimate Strength Elongation (≥ %): 40(≥ MPa): 205 Wall Thickness: 0.2-60mm Outside Diameter: 11-800mm Place of Origin: China Package: standard export packing Shape: round Payment term:T/T,L/C etc. Application: 1 Air Conditioner and Refrigerator 2 Water tube service and distribution 3 Fire Protection, Solar, Fuel/Fuel Oil 4 Natural Gas, Liquefied Petroleum (LP)Gas 5 HVAC, Snow Melting, Drain, Waste, Vent Piping 6 Re-drawing usage 7 High conductivity use 8 Cable Lugs and Termainals 9 Electric Connectors 10 Lighting industry

Features of 2023 New Arrivals Solar Fuse Connector: 1.Rated voltage up to 1500VDC. 2.Rated current up to 100A. 3.Rated breaking capacity reach 10kA. 4.In conformity with IEC60269.6 standard.

NSPV PV4.0 Solar panel connector 1000VDC Features: TUV certified; Imported PPE insulation material; IP67 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ. P.S.: Prices excluding dustproof cap.

NSPV PV4.0 Solar panel connector 1500VDC long type Features: TUV certified; Imported PPE insulation material; IP68 degree of protection at 1m,1H; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5 kV DC.

NSPV PV4.0 Solar panel connector 1500VDC standard type Features: TUV certified; Imported PPE insulation material; IP68 degree of protection at 1m,1H; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5 kV DC. P.S.: Prices excluding dustproof cap.

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.

Kofulso was established in 1989 as a company that manufactures gas pipes, drinking water pipes, new construction pipes used in firefighting and disaster prevention systems, industrial flexible pipes, and brass connectors. http://www.kofulso.co.kr/

A flexible and cost-effective way of connecting tubes to each other reliably and stably. RK Rose+Krieger developed the precision-cast stainless steel tube connectors specially for heavy loads and impact-resistance. The high-strength tube connectors are resistant to high temperatures and corrosion, and are engineered for dynamic loads. An electrochemical passivation – the tube connectors are electropolished in a final working step – makes them more resilient and resistant to acids than elements made of untreated stainless steel. As a result they are particularly resistant to cleaning with aggressive cleaning agents or hot water from high-pressure cleaners, and ideally suitable for use in packaging machines or for feeding technology in plants in the chemicals industry. Stainless steel clamp connectors are tough. Stainless steel clamps are particularly important for users working in the fields of chemical and food technology.

The PolyGrip® blind rivet nuts Die PolyGrip® blind rivet nuts are the logical further development of many years of experience with our PolyGrip® multi-range blind rivets. Thanks to the benefi ts of its large drilling hole tolerance and the option of covering various grip ranges with just one fastener, the PolyGrip® blind rivet nut has become a fi rst-choice connector in many industrial applications and in trade. PolyGrip® blind rivet nuts – The GESIPA® blind rivet nuts with large grip range Bringing together multiple dimensions saves handling and storage costs while also permanently reducing the risk of confusion in the workplace and the quality problems this can result in. Large grip range: Ideally, the one PolyGrip® blind rivet nut can replace up to fi ve different dimensions of DIN standard blind rivet nuts thanks to the large grip range.

New design 21.5 inch 16:9 wide screen touch with arm and connectors industrial monitor 21.5 inches operating panel with control buttons

Adopting Ethernet standards from the office environment into the industrial world has opened up new perspectives for automation technology. From control level via factory networking to field level, communication has to be provided with high transmission rates and in real time in order to enable remote maintenance and control of complete plants and systems via networks. However, the precondition is robust and high-quality connection technology.

Modern automation solutions need universal communication cabling for the differentnetworks. High speed connectors are demanded in the circuit between the office world and the production level. The M12x1 X-coded connectors have been developed for such applications. These components are designed for transmission technology according to CAT6A and 500 MHz/10 Gigabit, and are standardised to IEC 61076-2-109. The X-coded connectors have 4 shielded pairs, for reliable high speed data transfer, and industrial grade materials for harsh environments, all in the small M12 connector.

Bus technology has advanced over the last few years in industrial automation. The connectors required for data transmission are very bus-specific in their design. To access the very complex world of bus technology, CONEC offers connectors for Profibus DP, Device- Net and Industrial Ethernet 10 Gbit. Profibus is a manufacture-dependent, open field bus system for a variety of applications in manufacturing, processing and building automation. Industrial Ethernet is the general term for all applications that use the Ethernet standard to network devices used in industrial automation.

In industry and transport, M12 connectors are used for sensor / actor wiring as well as for BUS systems. Increasing time pressure due to short time-to-market requirements and high cost pressure make it necessary to build systems quickly, flexibly and reliably. During implementation, easy field attachable connectors play a crucial role. The new CONEC M12 field attachable connector with screw connection offers the appropriate solution and is available in codings A, B, D, and X.

In industry and transport, M12 connectors are used for sensor/actor wiring as well as for BUS systems. Increasing time pressure due to short time-to-market requirements and high cost pressure make it necessary to build systems quickly, flexibly and reliably. During implementation, easy field attachable connectors play a crucial role. The new CONEC M12 field attachable connector with crimp connection offers the appropriate solution and is available in codings A, B, D, and X.

M12 Power L-coded - A new standard for miniaturised power supply. M12 Power with L-coding as the new standard connector for 60V/16A DC power supply. The connector is standardized to IEC 61076-2-111

For industrial applications in harsh environments, connector systems meeting such special requirements are needed. For our IP67 connectors are special hoods in plastic or plastic metallized available. Our hoods can also be combined with a broad range of applicable accessories of the CONEC programm for shielding, sealing and securing of connections and interfaces. For applications requiring not only IP protection, but also protection against electromagnetic interference in sensitive signals, CONEC offers a metalized version with shield connection at the cable strain relief.

Industrial plug is suitable for industry use. It is generally divided into 3-core, 4-core, 5-core and so on. The current is generally divided into 16A, 32A, 63A, 125A, 250A, 420A and so on. The protection degree can be divided into IP44 and IP67. Generally, it is used with industrial socket and industrial connector. Economic Industrial Plug ● Conform to European / international standards EN/IEC 60309-2

The ITT Cannon CA-COM and CA-COM-B series connectors are enhancements of the legendary CA series for specific market needs. They were developed particularly for industrial application and impress with their superior contact technology. These are water-proof connectors that are completely sealed and insensitive to condensation, vibration and contamination. The connectors of both CA- series can be replaced with the corresponding types according to MIL-C-5015 or VG95234, as mounting dimensions and layouts are the same. RoHS compliant

The ITT Cannon CA-COM and CA-COM-B series connectors are enhancements of the legendary CA series for specific market needs. They were developed particularly for industrial application and impress with their superior contact technology. These are water-proof connectors that are completely sealed and insensitive to condensation, vibration and contamination. The connectors of both CA- series can be replaced with the corresponding types according to MIL-C-5015 or VG95234, as mounting dimensions and layouts are the same. RoHS compliant

The MS / CA connectors form one of the most reliable series in the connector industry. They have a simple design but are simply great for individual wiring and have extremely rugged shells. Designed for single wire assembly, not for jacketed cables. The MS / CA series is a reliable connector range for applications "from device to device"; it is also widely used for testing or inspection purposes.

The MS / CA connectors form one of the most reliable series in the connector industry. They have a simple design but are simply great for individual wiring and have extremely rugged shells. Designed for single wire assembly, not for jacketed cables. The MS / CA series is a reliable connector range for applications "from device to device"; it is also widely used for testing or inspection purposes.

Dalroad supply a wide range of DEUTSCH Connectors for industrial commercial vehicle applications including AEC, DRB, DRC, DT (DT Detector), DTHD, DTM, DTP, DTV, HD10, HD30, HDP20, HDSCS, IMC and STRIKE connectors, contacts, tools, and accessories. Order DEUTSCH connectors online today on our new website: shop.dalroad.com Request the DEUTSCH catalogue from Dalroad today at http://www.dalroad.com/new-deutsch-connector-catalogue/