Industrial waste - Import export

To dispose of waste is more and more a cost factor. Every industrial company produces a lot of general and municipal waste. With a license and an incinerator, you have a way to handle your waste problem. Be sure, incinerate municipal rubbish is an ecological, cost-effective and easy solution. In which industrial companies it is very popular Construction companies Building Chemical companies Food industry Oil and gas industry Production of raw materials Plastic industry Every kind of wood industries CBD industry Pharmaceutical industry

Diffusers designed for aeration of activated sludge basins and tanks in Municipal and Industrial wastewater treatment plants. Quick and easy to assemble by Rotating Diffusers clockwise into Screwed connection. Designed to give optimum performance. DIFFUSER BODY The manufacture of this component in Glass Reinforced Polypropylene gives it excellent resistance to abrasion, most chemicals with significant mechanical strength. EPDM MEMBRANE The EPDM Membrane prevents the penetration of water into the distribution pipework when the air is stopped. CLAMPING TYPE AQUADISC® 250-305: Clamps are manufactured in stainless steel or polypropylene and secures the membrane to the diuser body; AQUADISC® 320: Clamp made of glass fibre reinforced polypropylene. THREAD 3/4’’ CONICAL GAS TYPE FITTING Allows Aquadisc® difusers are mounted by simple turning clockwise

Submersible degreasing aerator The AEROSPEED is a submersible degreasing aerator that produces microbubbles which in turn causes grease to float onto the liquid surface. The unit is easy and simple to operate and install. Robust IP68 cast iron motor, coated with epoxy and equipped with a temperature control sensor Motor specially adapted to the constraints of operating a submerged degreasing aerator according to Europelec standards Stainless steel suction tube Stainless steel frame specially designed to optimize the hydraulic flow Stainless steel propeller specifically designed to ensure simultaneous mixing and suction of air.

Submerged self-aspirating aerator for wastewater treatment in municipal and industrial applications. Ideal for the Aeration of shallow and medium depth sewage treatment plant tanks. Suitable for buer basins, aeration tanks, aerated lagoons and SBR reactors. Size ranges from 4kW to 37 kW. IP68 Robust motor in epoxy coated cast iron, equipped with temperature control probe Motor specifically adapted for operating submerged and at high-speed in accordance with europelec stan- dards AISI-304 or AISI-316 stainless steel frame specially designed to optimise performance Discharge channels distributing the airflow to optimize aeration and mixing

Diffuser cover made of reinforced polypropylene Diffuser cover made of reinforced polypropylene Polypropylene mounting collar with A4 screw fixing Silicone gasket within the assembly Mounting on stainless steel pipe in DN40 or PVC 5 Mountings with smooth orifice/smooth air sleeve in polypropylene 30% glass fibre Mountings with tapped orifice/Air sleeve for tapped outlet in polypropylene 30% glass fibre Shark fin shape diffuser design limit the adhesion of solid and fibrous residues. Self-cleaning orifices whose profile privides the formation of homogeneous bubbles and avoids coalescence or breakdown The geometry of the self cleaning diffuser outlets guarantees the formation of homogeneous bubbles regardless of the air flow rates within the operating range. Compatibility with high temperatures up to 110°c

The Aquafen® is a high-speed floating aerator for the aeration and mixing of industrial effluent and wastewater prevents stagnation in lagoons. Provided the supply and distribution of oxygen for the treatment of wastewater. Allows the wastewater to be mixed to maintain the solid particles in suspension and ensure effective treatment of the solution in the lagoons. Designed for simple installation and can be in situ above the water surface without draining the lagoon. This aerator is used for many various applications including bioreactors, activated sludge reactors, SBRs and fixed and variable level treatment lagoons.

Fine bubble aeration system for lagoons & large surface area ponds. HDPE Floating Feed pipe sized to provide the required air flow Air supply pipe to difusers Aquatube 70 type Tubular Diffusers Stainless Steel Diffuser Feed Section Concrete ballast to stabilise the diffuser assembly Cost-effective solution Low maintenance Specific modular system Adaptable to any lagoon or large pond Low maintenance requirements Very reliable system easy to install and operate Very competitive design and scope of supply Significant mixing of the total volume within the lagoon The active biomass is aerated effectively and efficiently.

Designed for aeration of Activated Sludge Basins in Municipal and Industrial Wastewater Treatment plants. The AQUATUBE® specific design prevents sedimentation and Optimises Mixing and Oxygen Transfer. The AQUATUBE® 90 is designed to be installed on DN100 stainless steel pipe or DN110 PVC using simple fastening system. The AQUATUBE® 70 can be installed on square stainess-steel manifolds or on polypropylene manifolds. DIFFUSER BODY The manufacture of this component in glassfibre reinforced polypropylene gives it excellent resistance to abrasion, high chemical resistance, and substantial mechanical strength. EPDM MEMBRANE The Membrane prevents water from penetrating into the feeders when air is stopped. EPDM MEMBRANE The Membrane prevents water from penetrating into the feeders when air is stopped. POLYPROPYLENE FIXING BRACKETS Allows simple and easy installation on circular manifold (only for Aqua tube® 90)

Bladed Horizontal surface aerator suitable for circular, racetrack or rectangular channel. Designed to be maximise oxygen and flow. Use of high-quality materials of construction together with mechanical gear driven equipment. Reliable equipment with extremely long service life. COMPONENTS Brush bridge shaft with anti-corrosion paint Galvanised Steel brush blades or stainless steel Side protection discs Bearings Vertical geared motor with high energy class IE3 enclosure and eciencies Horizontal geared motor with energy class IE3 enclosure and eciencies Geared motor support bracket Upstream and/or downstream rotor cover Automatic grease cartridge Operator safety features on and upstream of the brush aerator

Important role in the removal of grease, essential for the rest of the equipment and process of the treatment plants. Significantly Reduces grease in the wastewater process. Creates a mixing zone for the separation of grease and other materials. COMPONENTS Surface scrapers complete with motor gearbox IP55 – Suitable Enclosure – Painted Cast Steel Our degreaser is manufactured in stainless steel. Screen system with integrated mechanical torque limiter Integrated mechanical torque limiter Scraper arm Squeegee Stainless steel hopper for the removal of scum and other floatable materials

This product is designed to descale fine bubble membrane diffusers by injecting formic acid to their internal surface. This operation is required when an increase in head loss is observed and to significantly reduce calcium carbonate deposits (carbonation) in the membrane. PUSHCART manufactured in Stainless Steel and complete with the following Storage box in HDPE PVDF lined dosing pump Flexible delivery hose 25m in pvc (reinforced with polyester fibres) Spray nozzle in stainless steel

Polypropylene feeder for grids in bioreactors and degreasing tanks Suitable for both municipal and industrial wastewater treatment plants. Allows the installation of Aquadisc® 250 / 305 / 320 and Aquatube® 70 diffusers. Diffusers are known for their excellent temperature resistance, recyclability, and longevity. Glass Fibre reinforced polypropylene feeder. Noemi® module body, highly resistant to chemical and abrasive attack - standard length tubes of 2 m, which can be designed to fit many tanks configurations Polypropylene support and fixing brackets mounted on stainless steel anchor rods - the profiled shape of the bracket allows the module body to be locked in rotation and ensures its stability in the tank All stainless-steel fixi Drain plug

The removable aeration ramp is a solution to bring oxygen to effluent by fine air bubbles whatever the depth of the basin. These ramps are ideal to overcome an emergency oxygen deficit following a breakdown or an increase in the volume of effluent to be treated.

Sludge settling Equipment designed for primary and secondary settling tanks in urban or industrial wastewater treatment plants that contain solids and can then be extracted for sludge processing. Scraper bridge made entirely of aluminium and stainless steel for extremely long durability (compared to galvanised steel solutions in particular). Robust and reliable solution. The Scraper bridge is designed to be installed in circular settling tanks. Hundreds of scraper bridges installed over the last 60 years.

Submerged turbine operating at low speeds combined with an air blower for oxygen input. The Sofie® Submersible Aerator/Agitator is a mixing unit for extremely challenging applications. The units minimise blocking or clogging, the Sofie® can be used as an aerator or an agitator for wastewater treatment. Sofie® is designed to be installed at the base of tanks and to operate either in aeration or in a mixing mode. Sofie® is a good alternative to mechanical fine bubble aerators and is suitable for ponds with oxygen or mixing requirements.

Thickening of sewer station sludge Thickening of sludge from urban or industrial effluent treatment plants The sludge suspension is introduced into the centre of the circular thickener. The thickened sludge is discharged at the centre through the bottom. The sludge suspension is introduced into the centre of the circular thickener. This thickening solution is economical and requires little maintenance. Thickeners are usually made of concrete and can also be made of vitrified steel.

Designed to be installed in many circular clarifier tanks with flat or slightly sloping bases. Generally used for the treatment of urban or industrial wastewater containing solids that settle quickly and where it is important to be able to remove the sludge as it forms. Aluminium support beams Stainless steel feed well: at the bottom, which dissipates the effluent inlet and at the top, and assists in the sludge being raked towards the sludge discharge cone Sludge cone: collects the sludge transferring from the base of the tank through the suction tubes Suction tubes equipped with extended control valves Stainless steel weir plate and arm for the transfer to the overflow of clarified water

Specifically designed for fixed or Float mounting which allow impeller immersion to vary in accordance with flow levels and associated oxygen demand. Ideal for Oxidation Ditches and Pocket ASP’s.

Totally independent Aerator and Mixer. Air Provided by Blower with Variable Frequency Drive which can regulate oxygen supply from zero to maximum capacity; whilst retaining full mixing and oxygen dispersion capability therefore the units are ideal for SBR ASP & MBR applications.

As a floor mounted submersible aerator with intensive mixing action, it is ideal for deep tanks, existing pocket ASPs with moderate to high sludge concentrations and will re-suspend of settled sludge

Specifically designed for fixed or Float mounting which allow impeller immersion to vary in accordance with flow levels and associated oxygen demand. Ideal for Oxidation Ditches and Pocket ASP’s. 1.5 – 30kw Drive Motors 2 + 4-Pole + Dual Speed, Direct Drives Submersible Motor – IP 68 protection AISI 304 / 316 or special SS

Discharges the volume of clean water without disturbing the sludge blanket or floatable materials on the surface. Ideal for the SBR Process, Sludge Settling Tanks, Sludge Thickeners plus the general decanting process. Comprises of a Stainless-Steel float Circular Type – 10 to 150 m3/h Capacity Rectangular Type – 150 to 3,000 m3/h Capacity Custom manufactured AISI 304/316 or special Materials Can also be equipped with a pump which allows to transfer the water from the sbr to a basin located at a higher level Minimal sludge blanket disruption Adjustable flow rate Avoids discharge of floatable materials Straightforward design + installation

To assist bio-digestion FB aspirates and breaks high volumes of foam forming on the surface of some biological and thermophilic reactors. Foam is drawn into the volute where the degassing tube allows air to vent to atmosphere and liquid to re-entrain. Nothing is discharged from the basin. Applicable in high foam treating biological reactors, high foaming influent, thermophilic reactors, biological treatment of animal waste.

The FRMD is used to remove the upper layer of foam, oil or fats. The natural flow within the basin, together with the suction of the pump, attracts the surface of the water towards the center of the FRMD. An adaptable floating weir allows the upper layer to enter the pump and be removed from the basin. The weir and the submersible pump are mounted on a robust floating structure held in place by cables and springs or guiding tubes. Depending on the application and the geometry of the basin, the FRMD can be mounted together with a MIX SL (directional submersible mixer) or MIX-AS (floating downdraft mixer) to help the flow towards the weir. Applicable for removal of oil, fats, bulking + aging sludge, recycling of scum in sludge stabilisation + biogas, SBR and ASP tanks.

Open, two-bladed helical impeller providing intensive radial, sub-surface mixing pattern with minimal surface disturbance and extremely low power to volume performance Turbulent 3D radial mixing pattern 1.5 – 55kW Motor Range 4 + 6-Pole Speeds, Direct Drive Motor AISI 304/316 or other SS General-purpose mixer adaptable to most tank configurations plus applications and easily positioned for various process requirements Simple, robust, and reliable Non-clogging, no sheering action impeller Virtually zero surface turbulence and no aerosols No o2 transfer and easy to install and remove

Exceptional mixing performance for both low and high solids concentration solutions. Intensive, low-energy, 360 - degree mixing pattern and totally non-clogging impeller. 1.1 – 30KW Drive Motors 10-42 rpm Geared Drive AISI 304/316 or special SS Fixed Bridge + Floor Mounted High efficiency mixing of basins + tanks Activated-sludge processes Denitrification + sbr Also ideal for deep tanks + high mlss Intensive low energy to volume mixing Totally non-clogging design Minimal noise output Robust design – low maintenance

The EUROMIX® vertical shaft floating agitator is designed for all mixing applications and operates at 1000 rpm. The liquid rises to the surface of the tank and discharged at the base. The EUROMIX® flow-guide pipe allows the fluid to be directed to the base of the tank and can be used for deep tanks. The specific flow created ensures the mixing of the liquid. The general basis of the mixing being vertical, the water is directed at very high-speed causing a laminar flow by the agitation unit at the tank base. The EUROMIX® thus prevent the formation of dead zones in the tanks. It prevents sedimentation and rapid settling in holding and mixing tanks.

Slow speed aerators used for aeration and mixing of urban and industrial wastewater in various processes Provided in either fixed bridge or floating designs Ideal for Aerating most types of wastewater or industrial euents The TLF® Turbine Aerator is one of the most ecient aeration products in the marketplace Produces High Mixing and Homogenous Solutions in large lagoons and ASP tanks. IP55 geared motor with IE3 highly efficient rating Coupling sleeve and based materials coated with high grade Epoxy Paint Float can me supplied in various materials including HDPE Rotor made of glass fibre reinforced polyester. The GRP has a low density which allows installation without having to empty the tank and the design also reduces the axial loads on the gearbox.

Radial Aspiration and Mixing floatable material with downdraft flow and dual action impeller. The homogenization phase allows re-entrainment with the biological process. FRED units prevent settlement and crust formation as well as mixing the entire basin. Nothing is discharged from the basin. Applicable for Viscous + sludge bulking applications and grease trap systems upstream of biological reactor SBR. 1.1 – 22KW Motors 4 – 6 Pole Speed, Direct Drive 2 + 3 Float Options AISI 304/316 or special SS Special dual action impeller Excellent mixing performance Reliable + non-clogging design Easy installation + removal