Installation of machines - Import export

SPIROL’s Series 2000 Vibratory Feed Systems provide higher feed rates, gentler feeding, and the ability to accommodate a wider range of part configurations and materials than conventional feed systems. The advanced state-of-the-art electronic controller combines modern technology and unique features to deliver superior performance by continuously and automatically adjusting the drive system to the natural frequency of the bowl. This variable frequency technology compensates for changes in the bowl mass to ensure consistent feed rates and eliminates bowl tuning, allowing interchangeable bowls with a single drive. Additional benefits include increased energy efficiency, clockwise/ counterclockwise capability, reverse rotation, and significantly lower noise levels. The controller utilises a touch screen interface with the capacity to store 50 recipes. This system is ideal for fragile, tactile, and slippery parts. Visit www.SPIROL.com to learn more!

The Model CLX operates the same way as SPIROL's Model CL, yet this extra-large Compression Limiter Installation Machine is custom-designed to accommodate larger assemblies outside the standard footprint of the Model CL. Visit www.SPIROL.com to learn more!

This robust, vertical installation machine is specifically designed to install Compression Limiters into a variety of plastic components. The machine is available in two models: the CL1000 is capable of 4.4 kN (or 1,000 lbs.) of installation force and the CL2000 is capable of 8.8 kN (or 2,000 lbs. of installation force, and is available with multiple installation tips in nearly any configuration at various elevations. The incorporation of a touchscreen operator interface machines makes our machines easy to use and customisable. Language conversion is easily executed to support international use. The Model CL is equipped with installation verification to ensure that the machine has completed a full installation cycle and a Compression Limiter was installed at each location. This highly flexible platen style machine with 228mm x 279mm (9" x 11") working area. The Model CL is available with optional enhancement features for error-proofing and maximum efficiency.

This versatile tool is ideally suited for low to moderate levels of production for assemblies that require installation forces up to 22.2 kN (5,000 lbs). The Model PMX Extra Heavy Manual Pin Inserter easily accommodates quick change-overs. The fixture is simply replaced at the base of the machine, and the pin diameter is easily changed by switching the pin driving chuck. This Extra Heavy Duty Manual Pin Inserter will provide smooth operation, repeatability and durability.

MACHINE OUTER CASING REVISION MACHINE MECHANICAL OVERHAUL CNC PERIODIC MAINTENANCE AND GENERAL MAINTENANCE SERVICES MACHINE TRANSPORTATION MACHINE INSTALLATION MAKING IDLE MACHINES OPERATIONAL MANUFACTURING AND APPLICATION OF MACHINE COMPONENTS

Largeur 1600mm à 4500mm Longueur max 15000mm Many of today’s industries are characterized by the wide variety of fabrics that are processed. A challenge to many manufacturers, since fabrics with different characteristics require different cutting technologies. SM 375 TA is the solution to that challenge. With its multitude of installable tools and accessories this machine is able to cut an infinite range of patterns on a wide variety of fabrics and materials and deliver the versatility and manufacturing quality you are looking for. A series of specifically developed software programs make this machine a highly efficient cutting solution that delivers precision work and exceptional productivity, one of the flagship manufacturing solutions in the SMRE product range

Punches and set eyelets with washers in only one operation, in all types of material. It can be manufactured for setting eyelets from 6mm to 17mm internal diameter hole (only one measure per machine). According to the work developed, washer setting can be cancelled so the machine only sets eyelets. This machine is especially designed for textile and awning industry and also for graphic arts. Led lighting inside the machine to light the working area. Great raceway capacity. Laser pointer installed on the machine as standard. Sensors as standard on both eyelet and washer raceways. Detects lack of eyelets/washers. Touch screen to control all machine functions, alarm warning or grease needs.

Garbage separator machine is used to separate foreign grain products such as garbage and straw in wheat. The garbage purifier consists of two parts. Upper sieve part: It separates the large foreign substances in the wheat and throws them out. Lower sieve part: It eliminates small foreign substances from the wheat that pass through the upper sieve part and fall on it. Both screen wires can be easily removed and installed by hand. Wheat entering the machine from the product entrance is distributed smoothly and homogeneously on the sieve thanks to the vibromotor mounted on the center of gravity of the machine. The feeding box is oscillated with the body working by vibration on rubber wedges. With an adjustable flap, it ensures that the wheat is distributed across the entire sieve surface.

It is a machine that works with a fully compressed air system and is used to turn wheat coming from the cleaning unit into flour in flour factories. The chassis is made of sheet metal construction, and the sub-chassis is completely scanned on the borvek bench to ensure the parallelism of the balls. Rubber wicks are placed under the bed slides to absorb vibration. The properties of the rollers installed on the machine vary according to the diagram and are determined according to the purpose of obtaining the desired flour yield from the factory. All controls on the machine are made with the help of air stimulated valves and there is no electricity consumption. Depending on the amount of incoming product, the valves are stimulated, the pistons close and the grain balls come into action. Thanks to the plate on the grain rolls, the amount of product can be adjusted and flow is provided

It is a machine that works with a fully compressed air system and is used to turn wheat coming from the cleaning unit into flour in flour factories. The chassis is made of sheet metal construction, and the sub-chassis is completely scanned on the borvek bench to ensure the parallelism of the balls. Rubber wicks are placed under the bed slides to absorb vibration. The properties of the rollers installed on the machine vary according to the diagram and are determined according to the purpose of obtaining the desired flour yield from the factory. All controls on the machine are made with the help of air stimulated valves and there is no electricity consumption. Depending on the amount of incoming product, the valves are stimulated, the pistons close and the grain balls come into action. Thanks to the plate on the grain rolls, the amount of product can be adjusted and flow is provided as a curtain between the roll rolls.

It is a machine that works with a fully compressed air system and is used to turn wheat coming from the cleaning unit into flour in flour factories. The chassis is made of sheet metal construction, and the sub-chassis is completely scanned on the borvek bench to ensure the parallelism of the balls. Rubber wicks are placed under the bed slides to absorb vibration. The properties of the rollers installed on the machine vary according to the diagram and are determined according to the purpose of obtaining the desired flour yield from the factory. All controls on the machine are made with the help of air stimulated valves and there is no electricity consumption. Depending on the amount of incoming product, the valves are stimulated, the pistons

This is a plactic cover,used for machine accessories.

Brass types for stamping paper, wood and synthetics. In the pharmaceutical industry brass types are installed in packaging machines with corresponding brass type holders and give the product the labelling. Batch labellings, manufacturer coding and process data are thereby stamped flexibly. If you request changes, the types used can be replaced.

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of chain links Assembly Instructions Application examples Applications in various industrial sectors. E2 mini One-/Two-piece E-Chain® Small pitch for silent operation High torsion resistance Double stop system and large pins for long service life Optimized weight/stability ratio Easy to mount Manifold interior separation Typical industrial sectors and applications Construction machinery Handling systems Installation Packaging machines Textile machines Vehicle construction Wood machines Glass machines Machine construction General mechanical engineering etc. UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request

Aluminum separators automatically pick up aluminum and steel cans from all waste collected from the recycling stations. 1. Recovery aluminum cans from plastic bottles. 2. High efficiency of recovery of aluminum from city waste.

Iron Material grommets are recommended for indoor or short term outdoor use such as campaign signs that are meant to be used for a few months and get disposed. In time, when material is in contact with rain or humidity for a few months, it will cause erosion or rust. This can be installed with the same dies and machine as the self piercing brass material grommets. Iron Material Grommets Our quality Micron (Iron) Grommets are available in sizes # 1, #2, #3 and #5 for indoor/short term outdoor use grommets for an affordable short term usage fasteners for campaign signs or indoor birthday banners. The affordable pricing makes this particular grommet an option of choice.

This exceptionally versatile tool for post-mould assemblies is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The SPIROL® Model CM Manual Compression Limiter Installation Machine easily accommodates quick change-overs by simply: • Replacing the fixture • Swapping insertion punch/pusher tip • Adjusting the positive stop for new install height. The use of high quality shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model CM Manual Compression Limiter Installation Machine installs Compression Limiters ranging in diameter from M3 to M10 metric and #4 to 3/8" unified, and has a maximum insertion force of 0.9kN (200 lbs).

An accurate and consistent method to install virtually any Compression Limiter into plastic applications requiring up to 4.5kN (1000 lbs). Install just one Compression Limiter into one assembly, or several Limiters across multiple assemblies simultaneously for increased productivity. The Model CP’s quick-change tooling creates the flexibility to adapt the platform to a variety of products within seconds. The Model CP has a 230mm x 280mm (9”x11”) work area and is built on a rigid steel frame with high-precision shafting and linear bearings resulting in smooth operation, precise positioning, repeatability, and durability. The Model CP is available with optional enhancement features for error-proofing and maximum efficiency.

SPIROL offers robust, vertical installation machines specifically designed to post-mould install Compression Limiters into a variety of plastic assemblies. The machines can install a single Compression Limiter or multiple Compression Limiters simultaneously into various polymers, thermoplastics and thermosets. SPIROL’s Compression Limiter Installation Machines are versatile solutions designed to be retooled to accommodate changing part configurations. All designs incorporate standardized machine components to reduce factory lead time, improve component reliability, and lower component costs. SPIROL also specializes in application-specific fixtures to ensure that all assembly components are held accurately in place through the installation process.

Flexible, versatile solutions for post-mold Insert installation into thermoplastic and thermoset plastics. SPIROL's Installation Machines are the ideal foundation for stand-alone systems and enhanced assembly systems provided by SPIROL. Our standardized, time-tested, modular designs are robust, reliable and easily adjustable — allowing simple customisation to meet the specific needs of your application. More than 80% of the components in the Insert Installation Machines we design are pre-tested and production-proven standard items. This translates into faster delivery, greater reliability, and lowest cost for Insert Installation Equipment of comparable quality. We specialize in custom application-specific part holding devices. Fixturing – holding your components accurately and firmly during insertion – is a critical element to the performance of your assembly equipment.

Suitable for online printing of large text and graphics directly onto the sealing film. Can be combined with our online inkjet printer PM460 for simultaneous printing of fixed and variable texts and graphics.

Online printing of variable data such as batch number, production date, etc. Suitable for installation on blister packaging machines. Can be equipped with different inkjet systems.

Our entry-level model for printing fixed text and graphics on (coated) paper or Tyvek. Suitable for installation on blister packaging machines and can be combined with our PM460 online inkjet printer for printing fixed and variable content at the same time.

metal separator was developed for the examination of plastic granulates, ground material and powders for metallic foreign bodies. It is used in the injection molding and extrusion areas for slow-flowing material columns. Both the detector and the ejection unit have been specially developed for this area of use. This results in top performance data for precision, operating reliability and ease of cleaning. Failsafe storage of all system parameters Digital signal processing for best detection Process- and condition monitoring Standardised system for a wide area of use Robust construction for maximum lifetime Highest precision in long-term operation Fast ejector for minimized material loss Dismantle without tools All components are easily accessible

Capacitive sensors are designed for non-contact measurement of displacement, distance and position, as well as for thickness measurement. Due to their high signal stability and resolution, capacitive displacement sensors are applied in laboratories and industrial measurement tasks. In production control, for example, capacitive sensors measure film thickness and application of the adhesive. Installed in machines, they monitor displacement and tool positions.

Some of SPIROL's standard Pin Installation Models can be equipped with a pusher punch (in place of a pin insertion quill) to press Threaded Inserts into plastic assemblies. The most appropriate Installation Machine depends on the actual insertion force required to press the Insert into the plastic hole and the desired productivity. Generally speaking, the Model PMH Heavy Duty Installation Machine is typically used for low to medium volume installation, and for medium to high volume installation, SPIROL's Model PH/PHX Platen-Style Installation Machines can be used for simultaneous installation of several Press-In Inserts at the same or different elevations. Due to the length to diameter ratio of Press -In Inserts, it is not possible to cost-effectively tube feed this type of Threaded Insert with SPIROL's automatic feeding and Installation machines.

Self-Compensating, Soft-Contact Energy capacity 33 Nm/cycle Stroke 19 mm Ideal for soft damping: The SC found in the model code from the ACE series SC190 to 925 stands for 'soft contact'. These miniature shock absorbers manufactured from one solid piece are designed in such a way that they can be setup with a linear or a progressive braking curve. The soft damping character is thanks to the special, long strokes producing smooth deceleration and low reaction forces. These maintenance-free, ready-to-install hydraulic machine elements are equipped with an integrated positive stop. The use of side load adapter allows impact angles of up to 25°. Thanks to the designed overlapping effective weight ranges, these dampers cover an effective load range of below 1 kg to more than 2,000 kg! The miniature shock absorbers from the SC190 to 925 series are used in mechanical engineering and primarily in the areas of handling and automation.

Self-Compensating, Soft-Contact Energy capacity 73 Nm/cycle Stroke 25.4 mm Ideal for soft damping: The SC found in the model code from the ACE series SC190 to 925 stands for 'soft contact'. These miniature shock absorbers manufactured from one solid piece are designed in such a way that they can be setup with a linear or a progressive braking curve. The soft damping character is thanks to the special, long strokes producing smooth deceleration and low reaction forces. These maintenance-free, ready-to-install hydraulic machine elements are equipped with an integrated positive stop. The use of side load adapter allows impact angles of up to 25°. Thanks to the designed overlapping effective weight ranges, these dampers cover an effective load range of below 1 kg to more than 2,000 kg! The miniature shock absorbers from the SC190 to 925 series are used in mechanical engineering and primarily in the areas of handling and automation.