Filtering equipment and supplies - Import export

Properties • suitable to be placed on top of a silo • jet-pulse cleaning by compressed air • bag or cartridge filter elements • available filter area from 2 m² to 60 m² • removal of the filter elements (clean gas side) from above via hinged cover • available with lateral fan on request (0,75 ÷ 11 kW) • available diameters DN540 and DN790 • body always made of stainless steel 1.4301 and cover made of aluminum • parts in contact with the product in mild steel or stainless steel

Properties • no screws, pull-in sleeves or stiffeners in contact with the product on which the product can deposit • all parts that come into contact with the product are suitable for contact with food • continuously welded seams • hinged, lateral inspection hatch, which closes practically without dead space, with replaceable and washable seal • parts in contact with the product made of stainless steel with material certificate 3.1 according to EN 10204 • available for applications in positive or negative pressure or equipped with a fan

Filtration process is a simple mechanical treatment applied to water for the suspended solid removal.

Hardness in water is caused by certain salts. The main ions causing hardness are Calcium (Ca2+), Magnesium (Mg2+) and Bicarbonate (HCO3).

A convenient and reliable technology of separation for treatments of surface water, conditioning and sterilization, civil and industrial sewage.

A saline solution is put in contact with a water permeable membrane (but impermeable to the dissolved solids) at a pressure higher than the osmotic pressure of the solution.

This process removes ionizable species from liquids using electrically active media and an electrical potential to effect ion transport.

High performance physicalchemical separation process for water clarification, sludge thickening and raw material recovery.

High performance physicalchemical separation process. Flotation and settling flotation processes simultaneously applied.

High performance and modern conception clarifier. Application of advanced technology of the fluids passing into a lamella system.

Vertical saturator designed and tested in accordance to installation Country Directives.

Low energy consumption and no need to be fed with compressed air. Kinetic energy is used to draw in air. Our partner Rithco Papertec

Continuous operation thanks to sand washing device, no stopping for backwashing required.

Fine filtration, water clarification, raw material recovery depending on the application.

Simple design, modular concept, easy to install and flexible for the operation.

Fractioning, separating filter reliable, self cleaning, continuous operation.

High performance gravity machine, no vacuum required, no particular installation sites.

Double belt dewatering machine designed to dewater a wide range of sludge, by means of progressive compression between two permeable belts.

MC can be equipped with slotted or holes baskets and thanks to its design, the thickening factor is reduced to the minimum, ensuring optimum runability.

Ink particles previously detached within the pulper, are removed by rising air bubbles. Atmospheric air is used so no compressor is required.

The positive or negative ions fixed on these radicals are replaced by ions of the same sign in the liquid solution in contact with them.

Aerobic type plants. Total Oxidation Activated Sludge Reactor. Moving Bed Biofilm Reactor. Combined Reactor. Membrane Bio Reactors. Water and Air Mixing. Dissolved Air Flotation unit.

The range includes VSL series (low consistency device up to 1.0% consistency) and VSH series (high consistency device up to 4.0% consistency).

AFS has been designed to ensure the better mixing performances, thanks to a high efficiency propeller.

Application of UBP aggregate is very wide and can vary from each position of a traditional paper machine to the tissue machine.

AS can be equipped with slotted or holed baskets. Special rotor has been foreseen to ensure low pulsation.

The function of DDR is to modify the fiber characteristics by increasing °SR and get it suitable according to the final paper grades.

The function of DEF is to open the flakes still present in the stock. DEF is widely used along the virgin lines and broke lines.

Combination of the rotor (DELTA) and vat shape (special deflector design), has made possible to reach the above mentioned aims.