Parking area - Import export

Single packaged or in 10 pieces boxes.Wide by 6 cm wheels parking One space stand grounded bike rack – with patented system in black varnished steel with black pvc caps. Lower curves are a patented design by ANDRYS srl to set even the disk brake bikes. Single packaged or in 10 pieces boxes.Wide by 6 cm wheels parking dimensions : 38.5 x 29 cm h. 67 cm -Wide by 6 cm wheels parking

The Swing Carousel consists of a rotating structure rising along a central column and supporting three rows of swinging chairs; 16 double seat chairs are located on the inner row for accommodation of one adult and one child. The whole structure is hot-dip galvanised, with exception of the central column and is covered by hand painted decorative fibreglass panels on which lighting is fixed. The swinging chairs and their supporting chains are made by stainless steel. The covering roof is made up by a flame-retardant canvas. The rotation is made by two self-braking AC motors on top and one AC motor at bottom of central column. All motors are controlled by frequency drives and the whole system is operated by PLCs.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Catalogue dedicated to noaccess posts for car parks, pedestrian areas, parks and town squares in cast iron or metal and cast iron.

The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twelve cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 3 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive.

Table + benches for outdoor. Structure made in galvanized and powder coated steel, plan of the table and seats made with wooden slats treated for external use. http://ecommerce.flysrl.com/categoria/arredo-urbano/set-pic-nic/

Litter bin for outdoor, structure made in galvanized and powder coated steel, covered with wooden slats treated for external use, complete of inner container. http://ecommerce.flysrl.com/categoria/arredo-urbano/cestini/

Tree grate made in galvanized and powder coated steel. Available in various sizes and designs, the possibility of having combined vertical protection. http://ecommerce.flysrl.com/categoria/arredo-urbano/griglia-salvapiante/

Bench for outdoor. Structure made in galvanized and powder coated steel, seat made with wooden slats treated for the external use. http://ecommerce.flysrl.com/categoria/arredo-urbano/panchine/

Litter bin for outdoor. Structure made in galvanized and powder coated steel. Complete of inner container. http://ecommerce.flysrl.com/categoria/arredo-urbano/cestini/

Bike rack made in galvanized and powder coated steel. http://ecommerce.flysrl.com/categoria/arredo-urbano/portabici/

Planter made in galvanized and powder coated steel. Available in various sizes and designs. http://ecommerce.flysrl.com/categoria/arredo-urbano/fioriere/

Bike rack for outdoor. Structure made in stainless steel (like the picture) or in galvanized and powder coated steel. 5 - 7 - 9 places. http://ecommerce.flysrl.com/categoria/arredo-urbano/portabici/

Bench with backrest, structure in galvanized and powder coated steel, seat and back in pine wood, litter bin with ashtray and inner bin, structure in galvanized and powder coated steel, base in stainless steel

cestini per la raccolta differenziata da esterno in polietilene HDPE colorato e stabilizzato UV. Capacità 100 lt . Dimensioni: Altezza 1075 mm - Larghezza 560 mm

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. Ali cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 40-70 Volt Low voltage motor is also available for "Floor power pick-up" installations.

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 60-11O Volt. Low voltage motor is also available for "Floor power pick-up" installations.

Go-karts are among the best-suited entertainment for young people, men and women, who like competing while driving single-seat vehicles without any special driving skills. The vehicles produced by Bertazzon were designed to be easy to operate, both on fixed tracks (concrete or asphalt) and mobile ones. These vehicles are equipped with a perimetral inflated rubber bumper, specially designed to reduce the impact between vehicles and with the guard-rail. Available both on "Bare body" version and with fibreglass body (Sport, Buggy, ...).

The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twenty cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 5 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive.

The track-ride consist of open pavilion where automatically operated vehicles (multi-passengers) runs along apposite rail. Each car have a capacity of 2 or 4 passengers.These vehicles is designed to be operated on a multi-level ride. The vehicle consist of a painted steel chassis. The driving unit consist of DC gear-motor connected to the rear axle's wheels.

The track-ride consist of open pavilion where automatically operated vehicles (multi-passengers) runs along apposite rail. Each car have a capacity of 2 or 4 passengers.These vehicles is designed to be operated on a multi-level ride. The vehicle consist of a painted steel chassis. The driving unit consist of DC gear-motor connected to the rear axle's wheels.

The dark-ride consist of enclosed pavilion where automatically operated vehicles (multi-passengers) runs along apposite rail across "scaring" scene with animations and sound effects. Each car have a capacity of 4 passengers and is equipped with restraint lap-bars to hold passengers inside vehicles during operation. This Dark-Ride vehicle ìs designed to be operated on a single-level ride with flat surface.The vehicle consist of a painted steel chassis, surrounded by bumper profile, and painted fiberglass body. The driving unit consist of AC gear-motor connected to driving wheels "cllmbing" along the track. The electric motor is controlled by Frequency Drive programmed with pre-set operational speeds. The vehicle is supported by fours swivel castor wheels.

Bertazzon's "Midi" bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of one Adult and one Child each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 40-70 Volt. Low voltage motor is also available for "Floor power pick-up" installations.

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 60-11O Volt. Low voltage motor is also available for "Floor power pick-up" installations.

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 60-11O Volt. Low voltage motor is also available for "Floor power pick-up" installations.

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 60-11O Volt. Low voltage motor is also available for "Floor power pick-up" installations.

Double Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The two overlapped floors structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The second floor is accessible through two staircases. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

The Galleon Race ride consist of a circular development track with depressions and two “cat’s back”. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twelve cars run along the rail, connected to a central rotor by radial arms (sweeps). The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. The ride moves by means of 1 self-braking A.C. gear-motor fixed to the central rotor and controlled by Frequency Drive.