Joint filler - Import export

Surface preparation; Before starting the application, the surface should be cleaned of dust and anti-adhesive substances. The smoothness and mechanical health of the application surface should be checked. Application; The appropriate consistency of the mortar is 25 kg of joint filler in 5-7 liters of water. With a low-speed mixer, the joint filler is mixed into clean water for 3-5 minutes so that no lumps remain. The mortar, which is left to rest for 5 minutes, is mixed again for a short time and becomes ready for use.

Hyaluronic acid (HA), a polysaccharide (glycosaminoglycan), is naturally found in many areas of the human body, including the skin, eyes, and synovial fluid of the joints. HA has a unique capacity to bind and retain water molecules (up to 6 L water per gram), functions as derma filler and lubricant. It is the key molecule involved in skin moisture, and formulated also in nutrition supplements. Our HA is made by a process called bio fermentation, non-animal source, biocompatible and bio-degradable. It has excellent quality (pharma-grade), formulation friendly viscosity. In general, HA can be used as derma filler, joint injectables, eye drops, regenerative medicine, skin care products and nutrition supplements.

FUGA is a gypsum-based jointing compound for manual jointing with a joint tape of plasterboards. It is suitable for complete skim coating or filling small cracks. Application: • For filling and finishing joints between gypsum boards • Suitable for complete skim coating • Filling of small cavities and repairs • Application in premises with normal humidity Advantages: • High level of smoothness and smoothness of joints • Economical and easy to work with • Provides strong and durable bond between boards • Limited shrinking during storage TECHNICAL INFORMATION: In compliance with EN 13963:2015 : Type 3B • Paper bag: 5 kg / 25 kg • Mixing Ratio: ~ 2.8 l water : 5 kg | ~ 13.5 l water : 25 kg • Coverage: ~ 16 m²/ 5 kg | ~ 83 m²/ 25 kg • Consumption: ~ 0.30 kg/m² • Bond strength: 0.3 MPa • Bags per pallet: 120 pcs / 40 pcs • Pallet weight: 600 kg / 1000 kg

FUGA HYDRO is a moisture resistant joint filler for manual skim coating and jointing with a joint tape of plasterboards in premises with high humidity. Application: • For filling and finishing joints between Moisture resistant plasterboard types H2, DFH2, Titan Board, or Blue Board • Suitable for complete skim coating • Application in premises with increased humidity Advantages: • High level of smoothness and smoothness of joints • Provides strong and durable bond between boards • Limited shrinking during storage TECHNICAL INFORMATION: In compliance with EN 13963:2015 : Type 3B • Paper bag: 5 kg • Mixing Ratio: ~2.8 l water / 5 kg • Coverage: ~ 16 m2 / 5 kg • Consumption: ~ 0.3 kg / m2 • Bond strength: 0.3 MPa • Bags per pallet: 120 pcs • Pallet weight: 600kg

INSTRUCTION MANUAL 1- First, water is poured into a clean container. 2- 10 kg to approximately 4.8- 5.0 kg of water PLASTER BASED SPECIAL PURPOSE JOINT FILLER is added. 3- Mix for 3 minutes with 60 seconds of sipping and 60 seconds of waiting. 4- The molds and materials to be used must be clean. 5- Before completing the setting time, the amount mixed in the container at room temperature should be used. 6- Completion of the application before the start of the first freeze should be provided. 7- The mortar mixture, with its flexible and easy application, It dries in minutes. 8- In the joints where gypsum-based special purpose joint filler is used There is no need to use joint tape.

Cement based joint filler - Please contact us additional information.

These profiles are being used as sealant and fillers in the joints. They are divided into two groups as compressible and taped. Joint sealant profiles are commonly chosen for their high bending resistance, flexibility, chemical and water resistance and being noise free.