Leaking - Import export

Special probe for the location of leaks in construction trenches. Carrying out concentration measurements horizontally in open construction trenches. For the search of gas pipelines and the direction in which it lays. The penetration of water into the measuring device must be prevented in such measurements, so a water separator is installed.

In case of a contaminated cooling system, it is recommended to first clean the cooling system with Lindemann Radiator & Block Flush. As a result, Lindemann Radiator & Block Stop Leak will work optimally

Standalone TÜV approved filter dust monitor suited to the measurement of filter emissions after bag houses, cartridge filters, cyclones etc. • reliable measurement of leaking and broken bags in dust collectors • external display and keyboard • inbuilt sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Standalone TÜV approved filter dust leak monitor suited to the monitoring of filter emissions (0100%) after bag houses, cartridge filters, cyclones, etc. • reliable monitoring of leaking and broken bags in dust collectors • external display • inbuilt sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtimes and filter costs

Standalone filter dust leak monitor (0100%) for filter emissions monitoring after baghouses, cartridge filters, cyclones etc. where performance approvals are not required. • reliable monitoring of leaking and broken bags in dust collectors • manual sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Controller based filter dust leak monitor (0100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones etc. where performance approvals are not required. • reliable monitoring of leaking and broken bags in dust collectors • sensor configured remotely via controller • manual sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Test gas consisting of 95%N and 5% H2 - Robust hand-held unit with integrated suction pump - Measuring range 1ppm to 1000ppm - Fast response time

Experience unmatched accuracy and reliability with IMS helium leak detectors. Designed and built to provide advanced, (semi) automated helium gas leak detection tailored to your products. Our detectors, equipped with the best Mass Spectrometers, accurately count helium particles, ensuring meticulous leak testing for a wide range of customer products. From a few centimeters to one meter in size.

In order to ensure that castings, valves, pumps, hoses and other components or groups have been manufactured free of leakage, they are tested in non-destructive leakage tests. Oxygen, air, nitrogen or sulfur hexafluoride (SF6) can be used as the test medium.

used for leak testing of compression fittings, 7 inch touch display, thermal printer, USB data out to excel file, automatic pressure control, automatic pressure cycle control, automatic time control

The test chamber is used for performing leak tests on mechanical fittings and pressure pipes under hydrostatic internal pressure while subjected to bending. We can also provide with a pipe tester for building up the test pressure according to ISO 3458. According to ISO 3503 , pneumatic force application , bending templates for different sizes

The Combined test stand is used to carry out leak tests on pipe connections while they are going to have some mechanical force application for bending and crimping of the joint. It is used for testing of plastic pipes like corrugated one for joint's sealing. According EN 1277 , EN 1035 , Computer controlled , windows based software , control unit separate from cabin , bending and squeezing device , special end plugs

— Minimize operator intervention with a fully automated and integrated solution — Capture data from inaccessible or dangerous areas to keep your team safe — Monitor sound signature changes in real-time to prevent unscheduled maintenance Visualize the unheard and unseen with the power of acoustic imaging. The SV600 Fixed Acoustic Imager enables users to continuously detect, locate and visualize air and gas leaks or changes in sound signatures before they become costly problems.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

The Lindemann Oil Stop Leak contains an additional agent that returns rubber oil seals and o-rings and also plastic parts that have been ” hardened ” back to the original flexibility so that they regain their original function. This is not part of the Lindemann Worn Engine Treatment! This is also the difference between the two products

Whether your products are flexible or rigid, liquid or solid, the SpeedAir 3050 can swiftly and accurately test them all. With testing times as short as 30-45 seconds, it delivers results you can rely on, ensuring the integrity of your pharmaceutical containers. The SpeedAir 3050 is suitable for a wide variety of pharmaceutical products, including but not limited to: Ampoules Autoinjectors Bottles Cartridges Flexible bags (IV Bags, pouches, etc.) Syringes Vials

Special probe for the location of leaks in construction trenches. Carrying out concentration measurements horizontally in open construction trenches. For the search of gas pipelines and the direction in which it lays. The penetration of water into the measuring device must be prevented in such measurements, so a water separator is installed.

The GasPro gas detector can be equipped with sensors for up to five gases with ATEX approval. With the option of equipping the gas detector individually with various sensors, the GasPro gas detector is ideal for use in sewers, sewage treatment plants, landfills, ships, chemical and oil processing industries. An important unique novelty "positive safety" display. The GasPro signals the status at a glance via a three-color LED, green display = everything OK, yellow display = still OK, but a check is due soon, red display = not OK Particularly noteworthy is the loud alarm at 95 db and the optical signaling indicated by two LEDs that can be recognized from each side. The measured gas concentrations are saved every 10 seconds and stored in the internal memory. In addition, various events (switching on, alarm, calibration) are stored in the memory. The collected data can be transferred to a PC with a USB cable. A charging station with interface or a calibration station are also available.

With the very simple operation and the generated and saved measurement protocol, the documentation can be created quickly and completely reproduced. It is possible to save the measurement data in the device and to print it out again later. No tracer gas nor a second measuring device are required for use. The internal battery, the 230V charger or the 12V vehicle voltage can be used for the energy supply. All included in a complete set. Ethane is always contained in natural gas; evidence of this gas is also evidence of natural gas. A lengthy gas analysis is normally required to prove beyond any doubt that the measured gas concentration is actually natural gas and not swamp gas. This, also due to the sampling, a difficult and time- consuming process, is completely eliminated. Measurement and sampling directly at the borehole is easily possible. The printout can take place after the measurement.

With the GPL 3000 you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GP 2000 is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GP 2000 is a professional leak detector for everyday work.

With the GPL 3000 you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GPL 3000 is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GPL 3000 is a professional leak detector for everyday work.

With the GPL 3000 Ex you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GPL 3000 Ex is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GPL 3000 Ex is a professional leak detector for everyday work.

With the GPD 3000 you can detect the smallest of leaks. The digital display enables the measured value to be recognized precisely and the analog display makes it easy to assess the trend. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The sensor in the GPD 3000 is protected from dirt and mechanical stress by a metal protective cap. o simple o light o exact o rugged o 30 year guarantee o includes a free annual revision Clear digital display of the measured values enables even inexperienced users to easily search for leaks. Together with the robust metal sensor head and the stable housing, the GPD 3000 is a professional leak detector for everyday work.

With the GPD 3000 Ex you can detect the smallest of leaks. The digital display enables the measured value to be recognized precisely and the analog display makes it easy to assess the trend. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The sensor in the GPD 3000 Ex is protected from dirt and mechanical stress by a metal protective cap. o simple. Clear digital display of the measured values enables even inexperienced users to easily search for leaks. Together with the robust metal sensor head and the stable housing, the GPD 3000 Ex is a professional leak detector for everyday work.

The Sensistor Sentrac Hydrogen Leak Detector is a modern leak detector for industrial use. Based on the highly selective and sensitive Sensistor sensor, the instrument offers leak locating in a variety of situations both on the production and repair lines. Thanks to its unique ability to handle small and large leaks as well as high background levels of tracer gas, this leak detector is highly adaptable. The leak detector's hand probe is designed for maximum ergonomics and efficiency. The unit is controlled by a multi-function button for fast access to frequently used functions. It is equipped with LED lamps illuminating the area tested for leaks for more reliable pinpointing. The probe is also equipped with an easy-to-read OLED display to provide information about the entire leak detection process directly in the palm of your hand. For added flexibility, the Sensistor Sentrac leak detector is available in both desktop and battery operated models. Internal, rechargeable...

The Sensistor ISH2000 is a robust instrument for professional leak detection, both manual and automatic. The unique method involving the use of inexpensive forming gas (5 % hydrogen and 95 %nitrogen) as tracer gas. This combines unmatched measuring properties with user-friendly technology, low costs and minimal service requirements. This makes the Sensistor ISH2000 the best option for a wide range of production and maintenance applications. It is especially suitable for finding leaks of a size that would leak liquids such as water, fuel and oils or in environments with occasional large leaks. Sensistor ISH2000 Hydrogen Leak Detector is available as desktop and panel versions.

ULTRATEST Technology™ Speed, Sensitivity and Reliability for Demanding Leak Detection Applications The INFICON UL1000 Mobile Helium Leak Detector is designed to meet the most demanding industrial leak detection applications. Providing fast, accurate and repeatable test results, testing flexibility, and high sensitivity in a low maintenance design, the UL1000 is ready to tackle the toughest leak detection jobs industry can offer. The UL1000 is optimized to provide quick, accurate results in any application from the leak checking of large vessels and systems to high-cycle, repetitive component testing - 24 hours / 7 days a week - in the toughest industrial environments. With the addition of the TC1000 Test Chamber accessory, the UL1000 Helium Leak Detector provides easy, fast and accurate testing of hermetically sealed parts like IC packages, quartz crystals and laser diodes (according to MIL-STD 883, Method 1014).

Leak Testing for the Highest Quality Demands INFICON is taking a further step toward leak detection at the highest level with the HLD6000 refrigerant leak detector. It is setting new standards in user-friendly handling, reproducibility of measuring results and integration into local networks. The newly developed, slim and ergonomically shaped sniffer probe allows for more efficient leak detection. Furthermore, with its intuitive touchscreen display, the HLD6000 is even easier to operate than its predecessor the HLD5000. The HLD6000 leak detector also delivers the maximum in communication diversity. A USB interface as well as an optional I/O module and an optional fieldbus module are available for acquiring and using measurement data and integrating that data into local networks. COMPACT, LIGHT AND SLIM For optimal, efficient leak detection a compact sniffer probe is especially important. The HLD6000 sniffer probe is not only extra slim, but also light and ergonomically shaped....