Lift wheels - Import export

Hydraulic cylinder for lifting for wheel loader FERRUM DM416 x4 . Will be delivered like shown.

Activated in a few seconds on site Very robust compact construction •Invertable fork with adjustable width Two Ø 200 mm wheels for easy transport on site • Base equipped with 2 stabilizing arms • Feet with adjustable height wheels Lifting cable anti-torsion in very high resistance steel Level for perfect control of the position of the feet Lifting winch with automatic brake • Steel pulleys on bearings

Palletless automated car parking system CUBILE Palletless technology The palletless fully automated car parking system CUBILE is a perfect solution for creating from 50 to over 1000 parking spaces. As no pallets are used for transporting cars, the system is very fast and efficient. Drivers park their car at ground level in one of the entrance cabins and receive a parking ticket. The cabin is the only interface between the driver and the car park. From this point everything is automatic. The cabin’s rolling gate closes and the car is transported below ground in a lift before it is collected by one of horizontal transfer vehicles and brought to a free parking space. In the palletless parking system CUBILE, the Lödige Shifter does the heavy lifting. This is an ultra-flat robot that drives underneath the car and lifts it up at the wheels to take it from the lift to the transfer vehicle and transport it to the parking space.

Wheeled lifting platforms with single pantograph, hydraulic foot pedal pump, 4 wheels (2 fixed and 2 steering), brake, chrome handle for pushing, hand lever for the controlled speed descent, oven painting.

ALUMINUM LIFT TABLE Aluminum lift table, lightweight and practical with 100 kg capacity and maximum lifting height mm. 755. Folding handle.

FP SPA 800-DE-1V DOUBLE PANTOGRAPH PLATFORM - ELECTRICAL FEEDING AND ELECTRO-HYDRAULIC LIFTING Double pantograph wheeled lifting platform, completely electric with motorized advancement and lifting. The platform is equipped with: - Driving tiller with feed and lift controls - Two pivoting steering wheels - Two traction wheels - Geared motor for feeding - 24 V electrohydraulic power unit - Chrome cylinder for lifting - 2 long-lasting batteries of 12V / 60Ah each - Single-phase 220 V battery charger supplied

ELECTRICAL ELEVATOR WITH FRONT TIPPING BY 85° FPLTM10E The elevator-tilter for dump boxes with hydraulic pump driven by the rudder allows operators to lift and fold up to a maximum of 85° each type of fork mounted container (plastic, metal, wood) and to withdraw/deposit products with maximum safety. The height of a pick-up is about 1000-1200 mm. (Depends on the level of tipping) and allows operators to maintain an ergonomically correct position. Equipped with sturdy steel frame with fork tip rounded, steering wheels in polyurethane with parking brake and foot protectors. OPERATION: After braking the wheels, for lifting it is sufficient to press the button on the rudder which regulates the ascent and descent of the forks. The tilting is done by pressing the buttonhole located on the rudder, the UP button tilts the load to the operator, while the DOWN button will lower it again.

Practical and functional MINI ARG allows to lift loads of 100 kg up to a maximum of 970 mm./ 1180 mm. depending on the model. The exclusive hand winch allows to lift the load with minimum effort and through the automatic clutch incorporated may stop the ascent at any point in lifting.The descent of the load can only occur if the operator acts on the winch and intentionally causes its gradual descent. The trolley ARG load 100 Kg painted is available in: MINI ARG/V lifting height 970 mm rubber wheels MINI ARG/1V lifting height 970 mm - bidirectional rubber wheels - delivery 10 days MINI ARG/2V lift height 1180 mm - large raised rubber wheels MINI ARG/4V lifting height 970 mm - 260 mm diameter pneumatic wheels - delivery 10 days MINI ARG/4V-2 lifting height 970 mm - wheels ANTI DRILLING - delivery 10 days

The IMPOX 70 is the perfect choice where handling has to be just right. This is because it is made of an optimum combination of aluminium and stainless steel. The chassis and handles are rust-free (electropolished) and all tools are made of stainless steel, while the plastic control unit for lifting and lowering and the wheels of the lifter are antistatic (ESD) as standard. All tools and components are approved for the food industry. This light and almost elegant lifter is ideal for use in the food and kitchen sectors, being able to easily move containers and meat crates with a total weight of up to 70 kg from A to B as required.

When it comes to handling large and heavy paper, cardboard and plastic reels, COMPACT is the right choice. The smallest battery-operated lifter on the market features a combined boom with wheel for easy lifting of rolls up to 100 kg and a rotating V-block for special reels with axle up to 60 kg. A cost-effective alternative for those who like to keep things simple. This ensures your reels are transported safely from A to B – and all the way to the packaging machine (perhaps better: further processing machine?). Our COMPACT lifter is a simple, self-explanatory lifting solution, specially developed for the printing and packaging industry. And it’s so simple: pick up the reel on the boom or the V-block, run to the machine, apply the brakes and then comfortably push the roll from the boom or V-block into the machine.

Power Source Hand Operated Number of Tyres 3 Max Lifting Height 400 mm Wheel Material Nylon Material MS Loading Capacity(Ton) 3-5 Ton

The Thomson Core Electric Forklift is an ideal compact four-wheel electric lift truck solution for most indoor and warehouse applications. The Core Electric Forklift is capable of moving most any standard load while maintaining the ability to fully operate in spaces as small as 11 feet wide. And Thomson designed and built AC motors provide new levels of performance, efficiency, and reliability to maximize your productivity and return on investment.

hydraulic work pump for lifting arm and control circuits for wheel loader FERRUM DM416 x4

hydraulic work pump for lifting arm and control circuits for wheel loaders FERRUM DM620x4 / DM625 x4 construction machines.

Telescopic forklift for Ferrum DM yard loader / wheel loader suitable for the wheel loader models listed below. In order to ensure that your planned undertaking makes sense with the combination options you desire, we strongly recommend personal advice. Our specialist staff will be happy to advise you. Height selectable for 3 meters or 5 meters Load capacity 2 metric tons [2,000kg] Requires 3rd control circuit for extending telescopic boom with connection for quick coupler Fork width adjustable Includes 2 forks Lifting power of the wheel loader / yard loader reduced by the weight of the telescopic forklift particularly recommended wheel loaders: FERRUM DM416 x4, FERRUM DM430 x4, FERRUM DM625x4, FERRUM DM732 x4 pay attention to warnings! In order to ensure that your planned venture makes sense with the combination options you desire, we strongly recommend that you seek personal advice. Our specialist staff will be happy to advise you. Recommended for the models: Wheel loader

Hydraulic crane arm extra long with swivel function for Ferrum DM yard loader / wheel loader suitable for with connection for quick coupler requires 3rd control circuit to extend & retract the hook Requires 4th control circuit to swivel the crane arm Lifting power depends on the own weight and lifting power of the wheel loader model used. Different lengths available. Standard length here: 3.00 m retracted and 4.50 m extended Pay attention to leverage Combination with calibrated or uncalibrated scales possible, e.g. crane scales Our recommendation: from model FERRUM DM416 x4 and larger Attention: extra long trunk, you can do even more with it In response to a customer request, we were commissioned to build a simple, inexpensive crane arm with a telescopic function, which we could combine with the versatile FERRUM wheel loaders.

Hydraulic crane arm for Ferrum DM yard loader / wheel loader suitable for the models from the listing with connection for quick coupler requires 3rd control circuit to extend & retract the boom to which the hook is attached Lifting power Depends on the own weight and lifting power of the wheel loader model used. Different lengths available. Pay attention to leverage Optionally with high-quality swivel load hook Combination with calibrated or uncalibrated scales possible, e.g. crane scales Our recommendation: from model FERRUM DM416 x4 and larger Attention: long trunk, you can do a lot with it Recommended for: Wheel loader Ferrum DM308 x4 V2 (conditional) Ferrum DM312 x4 Ferrum DM416 x4 V2 Ferrum DM522 x4 Ferrum DM430 x4 DLZ Ferrum DM625 x4 Ferrum DM732 x4 Court loader: Courtyard loader FIRST 12 Courtyard loader FIRST 16

Volume: 360 L -Dimensions: 596x880x1099 mm -Weight: 15,40 KG ( +/-5%) -Body and cover with warranty certificate, produced by injection system using high-density polyethylene(HDPE). -Resistant to violet and infrared rays, acids, and alkalis, high and low air temperatures. -Combs are suitable for garbage truck lifting systems. -Material: HDPE -Wheels: 2 rubber 200*50 in size. -Temperature resistant: 30"C to +8O°C -The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. -Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. -It has -1 piece steel shaft. (Axle) -Max ıoading weight 144 KG (±5%) -Max total weight 160 KG (±5%

Volume: 240 L -Dimensions: 605 x 745 x 1060 mm -Weight: 12,50 KG ( +/-5%) -Body and cover with warranty certificate, produced by injection system using high -Density polyethylene(HDPE). -Resistant to violet and infrared rays, acids, and alkalis, high and low air temperatures. -Combs arms are suitable for garbage truck lifting systems. -Material: HDPE -Wheels: 2 rubber 200*50 in size. -Temperature resistant: 30"C to +8O°C -The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. -Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. -It has -1 piece steel shaft. (Axle) -Desired labelling work can be done on the front body of the products.

Volume: 120 L -Dimensions: 925 x 465 x 580 mm -Loading Capacity: 60 Kg -Weight: 7,5 KG ( +/-5%) -Body and cover with warranty certificate, produced by injection system using high -Density polyethylene(HDPE). -Resistant to violet and infrared rays, acids, and alkalis, high and low air temperatures. -Combs are suitable for garbage truck lifting systems. -Material: HDPE -Wheels: 2 rubber 200*50 in size. -Temperature resistant: -30"C to +8O°C -The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. -Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. -It has -1 piece steel shaft. (Axle) -Desired labelling work can be done on the front body of the products

Volume: 120 L -Dimensions: 925 x 465 x 580 mm -Loading Capacity: 60 Kg -Weight: 7,5 KG ( +/-5%) -Body and cover with warranty certificate, produced by injection system using high -Density polyethylene(HDPE). -Resistant to violet and infrared rays, acids, and alkalis, high and low air temperatures. -Combs are suitable for garbage truck lifting systems. -Material: HDPE -Wheels: 2 rubber 200*50 in size. -Temperature resistant: -30"C to +8O°C -The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. -Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. -It has -1 piece steel shaft. (Axle) -Desired labelling work can be done on the front body of the product

Volume: 240 L -Dimensions: 605 x 745 x 1060 mm -Weight: 13 KG ( +/-5%) -Body and cover with warranty certificate, produced by injection system using high -Density polyethylene(HDPE). -Resistant to violet and infrared rays, acids, and alkalis, high and low air temperatures. -Combs arms are suitable for garbage truck lifting systems. -Material: HDPE -Wheels: 2 rubber 200*50 in size. -Temperature resistant: 30"C to +8O°C -The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. -Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. -It has -1 piece steel shaft. (Axle) -Desired labelling work can be done on the front body of the products. - There is foot pedal mechanism.

The OBC-25SC grain cleaner cleans any grain using 8 sieves and an aspiration system with a built-in cyclone. The installation of a cyclone at OBC-25SC made it possible to solve the problem of cleaning the air emitted by the OBC-25SC fan from dust and light impurities (small parts of leaves, grains, insects, sand, etc.). Previously, this was solved by installing a separate cyclone near the OBC-25S, conducting an air duct from the OBC-25S fan to it, and installing a clean air exhaust system from the cyclone. This led to significant additional costs and required a large free space. Now OBC-25SC with an integrated cyclone that successfully copes with cleaning a heap of grain, saves space and money. Additional advantages of the grain cleaning machine OBC-25SC: - high productivity with small sizes; - simple, durable design; - quick sieve change; - automatic cleaning of sieves with built-in brushes; - can be equipped with lifts, cyclone pipe and wheels.

The 60 and 80 l MGB are the portfolio classics. They comply with DIN EN 840 and RAL-GZ951/1 (GGAWB) and are noise reduced according to EU directive 2000/14/EG. Characteristics: — Small holding capacity, ideal for the separation of different fractions in small households — Comb lift receiver with robust support struts and guiding strips for operator safety during mechanical lifting — External wheels, available with 200 mm Ø rubber tires

To let you know for which project(s) you can use these electric actuators, we share the following equipment or machinery: Off-highway mobile equipment such as agricultural machinery, construction machinery, mining, forestry, road work and railway equipment Turf and garden machine such as lawn mowers, golf carts, tractors, cleaning machines, sky lifts, and other utility vehicles Industrial equipment such as conveyors, adjustable work tables/platforms, and hatch-doors-locks opening/closing) Health, fitness, and medical equipment such as handicap vehicles, wheel chairs, lifting units/beds, gym and therapy equipment Marine boats, ships, and oil rigs such as seats, hatches, fire doors, rescue equipment, values, and throttle control

To let you know which project could use 12V linear actuator,we share the following equipment or machinery: Off-highway mobiles equipment such as agricultural machinery, construction machinery, mining, forestry, road work and railway equipment Turf and garden machine such as lawn mowers, golf carts, tractors, cleaning machines, sky lifts, other utility vehicles Industrial equipment such as conveyors, adjustable work tables/platforms, hatch-doors-locks opening/closing) Health, fitness, medical equipment such as handicap vehicles, wheel chairs, lifting units/beds, gym and therapy equipment Marine boats, ships, and oil rigs such as seats, hatches, fire doors, rescue equipment, values, throttles control.

This small actuator is popular in the overseas market. They can be used the following equipment or machinery: Off-highway mobile equipment such as agricultural machinery, construction machinery, mining, forestry, road work and railway equipment Turf and garden machine such as lawn mowers, golf carts, tractors, cleaning machines, sky lifts, and other utility vehicles Industrial equipment such as conveyors, adjustable work tables/platforms, and hatch-doors-locks opening/closing) Health, fitness, and medical equipment such as handicap vehicles, wheel chairs, lifting units/beds, gym and therapy equipment Marine boats, ships, and oil rigs such as seats, hatches, fire doors, rescue equipment, values, and throttle control

Allows the counter to be reset to zero manually at the push of a button or program controlled during marking. Option PN comprises of a compact compressed-air cylinder in the marking wheel and a RESET key on the machine’s control panel. Programmable, automatic reset function requires Option W. W - PROGRAMMABLE ELECTRONIC CONTROL MODULE FOR PN PNEUMATIC RESET SYSTEM OR OTHER PNEUMATICALLY OPERATED FUNCTIONS Causes, for instance, the counter to be reset to zero or the marking wheel to be lifted every time a preset length of cable has passed through the machine. An additional, programmable contact closure allows an external process (e.g., cutting the cable at a preset length after the counter has returned to zero) to be triggered. 2W - EXTERNAL DEVICE PRE-SELECTION Option 2W features a second pre-selection counter to be used for controlling an external device, e.g. for triggering a cutting device when achieving a pre-defined length of the marking good. The pre-defined length corresponds

for vacuum lifting devices type CLAD-LIFT More functionality for the CLAD-LIFT with attaching parts and several oad handling attachments. Twin wheels, Lifting hook, Support wheels, Adapter 150° and 165°, Radio remote control, optical or acoustical alarm, Platform for forks, Solid rubber heavy load wheels, suction plates, extensions of traverses or other application. Twin wheels Give the CLAD-LIFT more stability and better handling on soft surfaces and reduces the point load pressure of the wheels to the floor surface. Lifting hook For transporting suspended loads on the CLAD-LIFT. The goods to be transported can be simply suspended with a loading belt or a chain. Support wheels To stabilize the CLAD-LIFT when assembling windows and glass doors. Improves safety when pivoting and rotating the load. Lifting fork Turns the CLAD-LIFT into a pallet truck for transporting pallets and other loadable goods. Ideal for loading and unloading vehicles without crane and forklift. Adapter...