Liquid paints - Import export

Filters made at our factory in Nantes (France) Standard Filtr’Overspray is well adapted to filtration of paint overspray in spray booths. It is easy to manipulate and to stock. Its lifetime, 6 times longer than other filtering medias on the market, allows to make important costs reductions. This filter is perfectly adapted to filtration of any wet overspray particles (paints, varnishes, gel coat, glue, silicone, polyester etc…) Advantages of this filter : - Lifetime up to 6 times longer than other filtering medias on the market - Easy installation and manipulation - Environment friendly materials according to ISO 14000 - Adapted to filtration of solvent paints and water based paints This filter can be used in all spray booth with horizontal and vertical airflow.

Filters made at our factory in Nantes (France) This filter uses the same principle than Standard Pleated Cardboard Filter with a polyester media sticked at the back in order to increase filtration efficiency for dry dusts. Advantages of this filter : - Lifetime up to 3-4 times longer than other filtering medias on the market - Better filtration efficiency than Standard Pleated Cardboard Filter - Easy installation and manipulation This filter can be used in all spray booths with horizontal and vertical airflow. Construction : This filter is made of 2 layers of recycled kraft paper, perforated, pleated and glued with a polyester media at the back. The quality of kraft paper (250g/m²) guaranties rigidity of the filter in all positions. Standard widths : - 1m - 0,90m - 0,75m Other dimensions and cuts on demand.

Eccentric screw pump tube HD-E Industryfor oils, paints and disposal liquids is available in the food version (Pure) The HD-E Eccentric screw pump in the industrial version transfers the advantages of the Drum pump low-viscosity media quite simply to the medium-viscosity range. The positive displacement pump has an easily detachable outer tube, a bearing head with mechanical seal and a free-running shaft with an eccentric screw as the pumping element - all easy to dismantle and clean. The Pump tube can be suitably combined with our single-phase motor. This ensures the draining of liquids and thus saves important resources. * also available in special immersion depths * Pump tube equipped with Lutz original hand wheel * Media examples: Oils, waste oils, disposal liquids, paints. * Smooth running * Uniform volume flow * Gentle, low-pulsation product conveying * Low wear * Easily detachable outer tube

The first flow meter with touchscreen display and backlighting impresses with its needs-based display and operability, multilingual interface and compact design. Thanks to the rotating oval wheel meters and the magnets placed on the measuring wheels, it enables precise measurement of the volume flow and measures non-flammable liquids such as paints, varnishes, acids, solvents, alkalis, mineral oils, hydrocarbons and highly flammable liquids precisely, quickly and, above all, efficiently. * Optionally available in explosion-proof design Features & benefits * Measurement according to the oval gear principle * High measuring accuracy due to overrun correction * Low pressure losses in the system * Touchscreen display with self-explanatory, multilingual user interface * Relay module for volume preselection can be retrofitted at any time * Approved in accordance with ATEX Directive 2014/34/EU, Category 2

The flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as alkalis, paints, lacquers, mineral oils, solvents, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2

The flow meter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating oval wheel meters and the magnets placed on the measuring wheels, it enables precise measurement of the volume flow and measures non-flammable liquids such as paints, varnishes, acids, solvents, alkalis, mineral oils, hydrocarbons and highly flammable liquids precisely, quickly and, above all, efficiently. * Optionally available in an explosion-proof version Features & benefits * Measurement according to the oval gear principle * High measuring accuracy due to overrun correction * Low pressure loss in the system * Touchscreen display with self-explanatory, multilingual user interface * Relay module for volume preselection can be retrofitted at any time * Approved in accordance with ATEX Directive 2014/34/EU, Category 2

The flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as Paints, lacquers, mineral oils, acids, alkalis, mineral oils and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2

The flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as Paints, lacquers, acids, alkalis, mineral oils, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2

Many customers want to reduce the number of their suppliers and therefore ask us to supply FINISHED products. From this point of view, Mecanic Systems is surrounded with reliable and highly flexible partners capable of handling, under our control, the following operations: TIG & MIG welding, point welding. -Surface treatment : passivation, phosphatising, chromating, anodisation, galvanising, -Finishing :Painting (powder or liquid)µ, Electropolishing, Personalised screen printing

“Powder coating” is a type of coating that is applied as a free-flowing dry powder. Unlike conventional liquid paint, which is delivered using an evaporating solvent, powder coating is usually electrostatically applied and then heat-cured. The powder can be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is harder than traditional paints. Powder painting is mainly used for coating metals such as household appliances, aluminium profiles, drum components, and car and bicycle parts. Newer technologies allow powder coating with other materials, such as MDF (Medium Density Fiber), using a variety of methods. Powder coating is very often used to properly prepare and protect various metal materials. Choosing this technique is very cost-effective as it has many advantages. Any defects and inaccuracies that remain after processing are hidden under the applied layer of varnish. Moreover, such coatings will be resistant

The Husky 307 diaphragm pump with type number D31211 has a pump tube and balls that are made of acetal, the diaphragms and seats are made of teflon. These Husky 307 double diaphragm pumps are ideal for pumping chemical liquids. These can be liquids such as paint, thinners, glues and, for example, polluting liquids. Because this pump is provided with two pump chambers with a common inlet and outlet, a continuous vacuum can be created by a linear movement of the diaphragm, whereby a ball valve ensures that the material can be further pressed. The membrane pump has a maximum pump capacity of 25 ltr/min and can handle a maximum working pressure of 7 bar.

Substations are transformer or distribution centers made of sheet steel in desired dimensions. They are suitable for use of all types of MV switchgears and LV panels. They are manufactured in the requirement number of sections and doors according to the project design. Strong construction made of sheet steel and profiles is painted with electrostatic powder paint or liquid paint for high corrosion resistance. In order to prevent the strong solar radiation in hot summer, the shell can be equipped with heat insulation material with low thermal conductivity, the most used fillers are: rock wool board, polystyrene foam, etc. Modular design in requested depth, width and length, in average 4 times lighter than a concrete version along with easy transport and commissioning are just some of the advantages of this solution. Compact substations are suitable for residential quarters, urban public utilities, renewable power plants, power distribution etc

Design, manufacturing and installations of customized and product based industrial painting line solutions

Automatized solutions for powder coating and liquid painting

KMP3 Manual airspray is ideal for parts that require fine finish quality delivered by electrostatic technology. Description Lightweight electrostatic gun Paint savings (high transfer efficiency up to 95%) Outstanding finish quality Performance: Reliable perfomance with high end production Adjustable high voltage to adapt the electrostatic effect to the part to be painted Productivity: Increased operator comfort Easy and quick flushing (no deadzone in paint tube) User friendly with simple control Light and ergonomic to minimize operator fatigue Easy fan pattern adjustment Sustainability: Quality of selected components ensure reliability Fewer parts for easy field repair Reduced booth maintenance due to reduction in overspray KMP3 gun has been designed especially for spraying liquid paints electrostaticlly on substrate

Siga Filtration self-cleaning filters provide continuous filtration of low and medium viscosity liquids and have very low maintenance requirements. The KSF Series self-cleaning filters do not require backflushing which results in less fluid waste, zero interruption, and fewer maintenance parts. Applications include filtration of low to medium viscosity liquids in water, wastewater, inks, paint, varnishes, oils, and food products.

With this high-end spectrometer the advantages of a fast and precise 50mm2 SDD, a flexible and robust X-Ray excitation and a motorized XYZ-stage can be used to analyse a wide range of samples in fast, reliable and precise measurements. This includes for example (but not restricted to): - solids (like metal alloys, minerals, jewellery, electronic parts [PCB],…) - powders (minerals, ceramics, paint, soil,… ) in a corresponding holder - liquids (oils, solutions, paint, …) in a corresponding holder A Dual CCD camera system with wide view and high-magnification view enables a precise positioning of the sample easily from a big area to investigate exactly to region of interest you want to analyse. With the help of the optical system an easy navigation over the sample is possible and a laser-based auto-focus system ensures correct measurement position. Furthermore a second laser-system prevents collisions. The easy identification of areas containing targeted elements is possible by combi

The use of XRF techniques enables a non-destructive analysis of nearly all kind of samples with almost no pre-processing. Already this basic spectrometer configuration allows you to analyse: - solids (like metal alloys, minerals, jewellery, electronic parts [PCB],…) - powders (minerals, ceramics, paint, soil,… ) in a corresponding holder - liquids (oils, solutions, paint, …) in a corresponding holder with respect to the latest restricted materials guidelines (like RoHS, WEEE, etc.) but also in a more general way to estimate the composition in an element range from Al (13) to U (92). A CCD camera is used to position the sample that only the area of interest is measured – with the use of suitable collimators a minimum spot size of 1mm can be realized. To enhance the measurement speed and analytical performance (energy resolution) the EA1000VX is equipped with a state-of-the-art 50mm2 SDD detector (no liquid Nitrogen needed anymore). This hardware allows you to analyse film thickness

booth for liquid painting The booth for liquid painting Tamadry is a system of dry filtration, used to purify the air from the solid particles in suspension. Its installation ensures the quality of the production environment and the protection of those who work there. It’s suitable for the extraction of potentially explosive dusts (ATEX) from painting operations . Benefits The filter elements installed on the booth for liquid painting Tamadry avoid the consumption of compressed air. The maintenance of the booth for liquid is facilitated by easy access to the filter elements and other components. It is transportable in a horizontal position and easy to install. Standard equipment two-stage filtration spark proof fan electric box neon lamp

The PLM automatic self-cleaning scraper filter is an industrial filter fabricated in stainless steel equipped with a scraper, that does not use any consumables. It is ideal for filtering high viscosity industrial liquids, such as painting, as well as for the chemical, cosmetic or food industries. The PLM filter is self-cleaning and automatic. It has an incredible ability to filter high viscosity products (up to 200,000 cPs). Designed and manufactured in France, this self-cleaning filter is simple, solid and efficient. This industrial self-cleaning filter does not require any consumables, such as filter bags or filter cartridges and is fully automated. It is particularly suitable for industrial filtration of water-based or solvent-based paints and processes for the food industry, such as dough or pastry, jams, chocolate or any other viscous product.

Laminated with a non-woven backing that is extremely flexible and designed to accept all roof coatings, paints or liquid urethane finishes. Excellent for sealing the edges of concrete basements or terraces prior to pouring the liquid urethane finish. Tapes can be installed in just a fraction of the time that it takes to install or repair surfaces using conventional flame & heat welding techniques.