Magnetic systems - Import export

This magnetic system is specially designed for non-destructive testing of pumped vacuum devices, that required the creation of a uniform magnetic field not only in the center of the operating bore, but in the toroidal region of large size. The system is assembled on the basis of NdFeB permanent magnets.

AMT&C LLC offers a full range of services in calculations, design and manufacturing of permanent magnet assemblies with required magnetic field configuration. Many years experience in complicated magnetic systems production combined with application of modern most effective magnetic materials permit us to reach high parameters: - to produce, with permanent magnet systems, the magnetic flux density up to 3 Tesla and more; - to reach high homogeneity up to 105; - to create magnetic systems with complicated field pattern; - to produce adjustable magnetic field generators on the basis of permanent magnets. The magnetic field changing rate in such systems can reach 10 Tesla per second.

Whether while milling (rough and finish machining), drilling, sawing, welding or assembling, the EPM modules or module systems offer a large selection of clamping options, for example, to clamp during edge milling or deburring (without mechanical clamping equipment) or for the simple and quick fastening of workpieces during assembly. Workpieces can be easily and quickly fastened with the Triplemag magnet clamping elements. The Triplemag series has additional positioning magnets, ensuring a constant position on the machine table and which are separately switched. Through the use of pole extensions, any unevenness on the workpiece can be compensated for and a deformation of the workpiece can be prevented. Using pole extensions, plane-parallelism of up to 0.01 mm is possible on the workpiece. The processing runs without vibration and an even distribution of holding force is guaranteed throughout the entire ferrous clamping surface.

Whether while milling (rough and finish machining), drilling, sawing, welding or assembling, the EPM modules or module systems offer a large selection of clamping options, for example, to clamp during edge milling or deburring (without mechanical clamping equipment) or for the simple and quick fastening of workpieces during assembly. Workpieces can be easily and quickly fastened with the Doublemag magnet clamping elements. Through the use of pole extensions, any unevenness on the workpiece can be compensated for and a deformation of the workpiece can be prevented. Using pole extensions, plane-parallelism of up to 0.01 mm is possible on the workpiece. The processing runs without vibration and an even distribution of holding force is guaranteed throughout the entire ferrous clamping surface. Several Doublemags can be combined to process large parts.

These Permamax permanent magnetic chucks from ASSFALG are suitable for heavy clamp-lifting processing. These Permamax permanent magnetic chucks can be used for milling, rotating and grinding. Considerable holding forces are still achieved on uneven and rough surfaces. They allow for universal clamping of small, medium and large workpieces of any thickness, however, they are best suitable for thick and large workpieces. A complete, wide transverse pole distribution (steel/brass) guarantees consistently high holding force over the entire width up to the longitudinal sides. These clamping plates can be activated through a hexagonal switch lever.

These permanent magnetic clamping plates Permamax from ASSFALG are suitable for heavy clamp-lifting processing. These Permamax permanent magnetic clamping plates can be used for milling, drilling, grinding and slicing. Considerable holding forces are still achieved on uneven and rough surfaces. They allow for universal clamping of small, medium and large workpieces of any thickness, however, they are best suitable for thick and large workpieces. A complete, wide transverse pole distribution (steel/brass) guarantees consistently high holding force over the entire width up to the longitudinal sides. These clamping plates can be activated through a hexagonal switch lever.

This highly accurate magnetic clamping plate is used for grinding work as well as for eroding. It allows for universal clamping of small, medium and large workpieces of any thickness, however, they are best suitable for thin and fine workpieces. The permanent Microfine magnetic clamping plate is preferably used if a flat and light construction is needed during grinding, eroding or milling. A complete, fine transverse pole distribution (steel/brass) guarantees a consistent holding force over the entire width up to the longitudinal sides. This clamping plate can be activated through a hexagonal switch lever.

The AR series was specifically designed for workpieces that do not have any level contact surfaces. They are only switched on or off with a short compressed air impulse. Workpieces with level, flat, round or irregular surfaces are transported without effort. Individual solutions with multiple parallel-controlled magnets simplify your lifting task or work process. The magnets are only switched on with a short compressed air impulse between 5 and 8 bar. They are low-maintenance and have very fast switch-on times. It is not just used in fully automatic systems, but rather also for the simples manual lifting processes.

These magnets can be individually adjusted to different tasks. They are only switched on with a short compressed air impulse between 5 and 8 bar. They are low-maintenance and have very fast switch-on times. Individual solutions with multiple parallel-controlled magnets simplify your lifting task or work process. It is not just used in fully automatic systems, but rather also for the simples manual lifting processes.

Metal parts inside the powdered or granular materials transported between the machines in the process are captured by magnets Decoupled. The magnet is placed on the lid that opens outwards. When the lid is opened, the magnet is taken out and provides ease of cleaning. Since it is produced with natural magnets, there is no energy consumption. Applications Fields ◾ At food industry ◾ Flour & semolina mills ◾ Feed mills ◾ All grain cleaning plants ◾ Corn processing plants ◾ Oil factories ◾ At plywood factories

Where are magnetic field mats used? The coils currently manufactured by us are processed by our customers into so-called electromagnetic field mats. These mats are used in Pulsed Electromagnetic Field (PEMF) therapy. Many PEMF devices are suitable for private use at home. However, various health service providers including physical therapists as well as non-medical practitioners offer therapies based on magnetic fields. Why is our embroidery technology used for production? This technique creates circular-shaped structures that form the basis for a homogeneous flow/direction of the electric current. At the same time, the mechanical wire laying has an extremely high level of accuracy. The distances can also precisely be determined. How is the magnetic field created? Simply put, this is how electromagnetic fields are created: pulsating magnetic fields are generated by the electric current flowing through the wire. The more wire, the stronger the magnetic field.

Our rubber caps are used as scratch protection especially on delicate surfaces. They can be used with our flat pot and decoration magnets in order to protect the surface. Moreover it lowers the noise when putting on the magnet.

Our rubber caps are used as scratch protection especially on delicate surfaces. They can be used with our flat pot and decoration magnets in order to protect the surface. Moreover it lowers the noise when putting on the magnet.

A combination of the MSAC506 magnetic sensor and the MRAC506 magnetic ring forms a system for absolute angle measurement. The MSAC506 sensor has an SSI interface with a resolution of 12 Ö 16 bit. There is also an analogue output (1 VSS) with 64 periods for dynamic position tracking. The sensor has an LED for distance monitoring. Magnetic absolute encoder single-turn. Compact design. Resolution 12 … 16 bits. Additional analog Sin/Cos 1 VSS signals. Reading distance ≤1 mm

The magnet assembly can be clipped into the groove. It is freely movable or can be fixed by a threaded pin. The magnetic core is protected by a plastic cover and has a large magnet area in the groove. The magnetic system is lying nearly plan and has a closed, smooth adhesive surface which avoids scratches on the surface and the concentration of metal shavings. Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Temperature resistance up to 150°C

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets.

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets.

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets.

Felt Chocolate panel reduces annoying ambient sounds and reflections. It is manufactured using recycled materials. As Akustik Mimarlık; we serve you with our original designs. These wall panels can be combined in various shapes. It is presented magnetically with intelligent mounting system. Alternative mounting is possible with industrial adhesives and screws.The Felt chocolate panel is made from recyclable, formable polyester fiber and wool felt. Fire and acoustic tests of felt chocolate panel were carried out. Can be shared when desired.

Magnetic motor feedback systems are proving themselves in numerous applications in linear drive technology, handling systems, circuit board assembly, robotics and in a wide range of automation solutions in the context of Industry 4.0. In all of these areas, the speed and/or position of a drive must be communicated to a main controller in real time. The ultra compact LEC100 and LEC200 sensor duo has been developed by SIKO for these requirements. Repeat accuracy max. ±1 μm. max. resolution 0.2 µm (LD output circuit). Reading distance ≤0.2 mm. Works with MB100/1 magnetic tape. Signal period 1000 μm. Output circuit sin/cos or LD. Function and status display LEDs.

AViTEQ Magnetic vibrators can be used very versatile. The advantages of magnetic vibrators match all designs of vibrating machines. For almost each case of application in the vibration feeder technology and over all industries magnetic vibrators are the favorite system, in particular if it depends on high dosing accuracy. Magnetic vibrators are made in Germany on a highest standard. Advantages and benefits easy and continuously adjustable during running conditions PAL System (protection for wrong amplitudes) available for 25/33/50/100 (30/40/60/120)Hz variants immediate start/stop after switching linear amplitude Reliable permanent use High level of performance with compact dimensions Wear-free, without rotating parts Efficiency (long operating cycles and service life) Newest state-of-the-art of production engineering Conformity with all EC Guidelines, which affect the drives available for explosion-endangered spaces (Ex) available for 60 Hz power systems and other mains voltages Temp

High resolution magnetic absolute linear encoder system for CNC machine tools with robust design. The read head is guided contactless without ball bearing Measuring lengths: 70mm - 3.770mm Accuracy: 3+3ML/1.000 µm(p-p) Max. Resolution: 5nm Max. Response speed: 200m/min Extremely robust against vibration and shock Insensitive to contamination such as oil, water, moisture and dust due to the magnetic operating principle Same thermal expansion behavior as steel or cast iron machine bed Compatible with serial protocols from Fanuc, Mitsubishi and Siemens Siemens DriveCliQ version is Functional Safety certified

80 Lt Pedal Plastic Recycling Bucket Set of 3The raw materials used are resistant to sunlight, heat and cold.If desired, a magnetic lock system can be added.The products have the feature of nesting.It has a pedal and the lid can be opened easily.

The used raw material of the 80 Liter Mobile Wheeled Trash Bin is resistant to sunlight, heat and cold.It has two wheels.The products have the feature of interpenetration.Pedals can be added optionally.Optionally, magnetic lock system can be added.Optionally, a waste cover can be added.Made from recyclable material.It can be easily opened, emptied and used.Its leak-proof feature has been obtained through tests.It retains its color and does not fade.It can be produced with 10 alternative colors.

240 Liter Plastic Waste Container with Pedal used raw material has sunlight, heat and cold.It has two wheels.The products have the feature of interpenetration.Pedals can be added optionally.Optionally, magnetic lock system can be added.Optionally, a waste cover can be added.Made from recyclable material.It can be easily opened, emptied and used.Its leak-proof feature has been obtained through tests.It retains its color and does not fade.It can be produced with 10 alternative colors.The measurements given above are approximate and there may be +/- 5% deviation from the measurements.

360 Liter Plastic Waste ContainerThe raw material used in the production of the 360 ​​Liter capacity Wheeled Bin is resistant to sunlight, heat and cold.It has two wheels.The products have the ability to be intertwined.A pedal can be added optionally.Optionally, a magnetic lock system can be added.A waste cover can be added optionally.Made from recyclable material.It can be easily opened, emptied and washed.Its leak-proof feature has been proven by tests.It preserves its color and does not fade.It can be produced with 10 alternative colors.The measurements given above are approximate and there may be +/- 5% deviation in the measurements.

It has a medical waste emblem.The raw materials used are resistant to sunlight, heat and cold.Optionally, a magnetic lock system can be added.The products have the feature of nesting.If desired, the door can be opened more easily by adding a pedal to the product.There will be a CAUTION MEDICAL WASTE logo and text on the front surface.It is produced according to EN 840 – 6 Standards.The measurements given below are approximate and there may be +/- 5% deviation in the measurements.MEDICAL WASTES - Infectious WastesMicrobiological laboratory wastes (Culture and stocks, Infectious body fluids, Serological wastes,Other contaminated laboratory wastes (lamella, pipette, petri dish, etc.)Blood-blood products and objects contaminated with them.Used surgical clothes (fabric, apron, gloves, etc.)Dialysis wastes (waste water and equipment) Quarantine wastes

It has a medical waste emblem.The raw materials used are resistant to sunlight, heat and cold.Optionally, a magnetic lock system can be added.All 4 of the wheels rotate 360 ​​degrees, 2 of them have brakes and 2 of them have swivels without brakes.The products have the feature of nesting.If desired, the door can be opened more easily by adding a pedal to the product.There will be a CAUTION MEDICAL WASTE logo and text on the front surface.It is produced according to EN 840 – 6 Standards.The measurements given above are approximate and there may be +/- 5% deviation in the measurements.MEDICAL WASTES - Infectious WastesMicrobiological laboratory wastes (Culture and stocks, Infectious body fluids, Serological wastes,Other contaminated laboratory wastes (lamella, pipette, petri dish, etc.)Blood-blood products and objects contaminated with them.Used surgical clothes (fabric, apron, gloves, etc.)Dialysis wastes (wastewater and equipment) Quarantine wastes