Agricultural milling machines - Import export

It is used for cleaning and classifying semolina in flour and semolina factories. The product, whose flow rate can be adjusted, is evenly distributed over the entire screen surface by means of a curtain. Screening process is carried out with 2 or 3 layers of telero. With the aerodynamic air channel and adjustment valves, an equal vacuum is created on the whole screen surface, the products with extended adhesion surface such as bran and bran are separated from the product by vacuuming and pushed into the outlet channel. The product (semolina) free from bran is classified according to its grain size by means of sieves. Application Field ◾ At food industry ◾ Flour mills ◾ Semolina mills

The control sieve is used for the final control before packaging in the packaging unit of the flour factories. The product arriving at each passage of the square screen enters through the pressure pipe and moves vertically and horizontally through the pre-set flow paths along the passage. The final checks are made after the flour sifting process. The flour, whose last checks are made, is directed to the bagging process. Apart from flour and semolina factories, it is used in processing plants of wheat, corn and similar grains, in feed mills, in various food products processing plants for the final screening of mixed feeds and for the sifting of large-grain corn, crushed pellet feed, barley, oats and similar processes. Application Fields ◾ At flour mills: For wheat, corn and similar grain processing plants ◾ At feed mills: For final sifting of formulated feed meals, corn, crushed pellet feed, barley, oats and for removing the remained coarse materials after grinding and similar processe

Depending on the central control, it takes action by being set up with chain gear and ensures the transportation of the falling product. The body is made of steel. It has idler drive bearing system. It has been designed with a special tensioning device. It varies according to the desired capacities. Carrier plates are made of hardened steel. It is used wherever horizontal transportation is possible. It is used in feed, food, chemical, mining, sawdust and soil industries. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

Material: custom size: according to drawings Our company (Huan-Tai) is rooted in China since mid-90’s. As one of the early runners, we bring value to the table through our capabilities in engineering, quality control and schedule management that meet the high expectations of overseas customers in stability, consistency and predictability. We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. The Yaskawa servo motors installed on all axes bring speed and precision to the production process. Versatile application possibilities: drilling, cutting or engraving in materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. On this machine, you can even process thicker plate material, as the clearance height of the Z-axis is 200 mm. Versatile application possibilities: drilling, cutting or engraving in different materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and rim gears. We supply already well-known manufacturers for gear boxes. We are looking forward getting intouch with you to have a conversation about possibilities for your supply. Sectors of our (international) customers are: Mining, Oil, Offshore, rail and ship transmissions, industrial transmissions, and many more fields of applications. Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / rim gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible Cooperation with companies for special manufacturing of gears and pinions etc We speak English.

WiTEC Basic - the perfect, allrounder machine for the most precise and fastest machining of your sheet materials! Equipped with an FEM optimized machine design, premier precision components, and using powerful Servo Technology, the WiTEC router is capable of achieving top milling speeds and delivering top precision results. Thanks to the combination of Wissner’s innovative and patented hold&press Technology and sophisticated Vacuum System, you can mill even the smallest parts all the way through the finishing cut-out! No need for any adhesive paper or foil, no need for leaving connector tabs, and no deburring or cleaning is necessary! The ready-finished parts will go directly from the machine table to the end customer!

Different forms of radius notches can be machined according to various Standards.The notches are at different radius and angles. Micrometer notches at 0.01 sensitivity. Continuous machining is possible with electric motors. 1 TS EN ISO 179-1 A type notch knife is given together with the machine. Notch knives for various Standards(optional); ISO 180 Type A, Type B ISO 179 Type A, Type B, Type C

CNC Borverk, often referred to as CNC Boring Mill or CNC Boring Machine, is a specialized type of machining equipment used for enlarging or finishing pre-drilled holes with precision and accuracy. Borverk is the Swedish term for boring, reflecting the origin of this machining process. The CNC prefix stands for Computer Numerical Control, indicating that the machine's movements and operations are controlled by a computer program. CNC Borverk machines are commonly used in industries such as aerospace, automotive, oil and gas, and general manufacturing, where the production of large, complex parts with high precision is required. These machines are particularly suited for machining large workpieces that cannot be accommodated by traditional drilling or milling machines.

2016 Hi Spec Mixmax 24 MakeHi Spec ModelMixmax 24 GearN/A Product Number11023072 Year2016 N/A Registered2016 2016 Hi-Spec mixmax 24 Super, tandem axle, 30″ elevator with EZ3410 control, 385/55R22.5

With the FZ100 Portal Milling Machine Zimmermann has managed to achieve 6-axis machining using the patented in-house developed M3ABC 3-axis Milling Head. This concept sets new standards in the volume machining of aluminium, composite and model making materials as well as in the High Speed Cutting of steel and cast iron, where conventional 2-axis fork heads with A- and C-axis have long reached their limits in the 5-axis simultaneous machining. Advantages: - Machining four times faster is possible - Perfect quality thanks to the six axes - Highest accuracy possible

It is produced with 7 – 9 – 11 – 13 legs. It is used to tear the soil up, to air it, to break up the soil clods, to cut the roots of the weeds on the soil, to mix the seeds or mineral fertilizers thrown on the soil surface, to hoe between the rows of the plants when necessary adjustments are made. Peasant type cultivator has a longer life with a simple design. It provides much easier maintenance and repair. The lubricated and cemented special burt system ensures that it can work for many years without wear and is economical. Angle Type 7 – 9 – 11 – 13 are produced with legs. It is used to tear up the soil, to air it, to break up the soil clods, to cut the roots of the weeds on the soil, to mix the seeds or mineral fertilizers thrown on the soil surface. Thanks to its gusseted side arms, it provides the opportunity to be used in heavier earthworks.

KÖYLÜ TARIM Branch Shredder, which takes its movement from the PTO and is connected to the tractor with a three-point suspension system, works by rotating vertically on the soil surface and plant stems such as wheat, sunflower, cotton, corn, paddy, tobacco and bushes with its durable blades articulated on the roller, It is an important equipment that can maintain the cutting height, blade strength and balance sensitivity even if the soil surface is uneven, thanks to the slides on the side and the roller behind it, which recycle as organic fertilizer by breaking the pruned fruit tree branches and vineyard sticks. In order to provide ease of use in orchards and vineyards, the KHDP (Village Hydraulic Branch Shredder) model is also produced, which allows the machine to be shifted by allowing control from the tractor hydraulic arms. In the hydraulic sliding model, as in the fixed model, the height adjustment is made from the roller.

POWER HARROW is a tillage machine with vertical blades which turn right and left continuously. The power harrow does not turnover the soil and keeps the moisture inside. Since the blades turn to the right and left, it does not hold any soil or mud. Vertical operation increases the water intake of the soil. It allows the plant roots to develop faster by preventing stratification deep in the soil. A specially adjusted blade alignment increases efficiency while reducing vibration. It prepares the seedbed, also eliminates weed and plant residue. A seeding machine connection tool makes preparing the seedbed and sowing at the same time possible. -Universal 3point CAT II Linkage -1 3/8’’ Z6 Spline PTO Protective Shaft -4 Speed; Double Outlet PTO Gearbox with 5407501000 rpm provides -3000 min195 max361 -3500/4000 min236 max 437 rotor speed -30cm Length 15 mm thick quick fit high quality blades.

POWER HARROW is a tillage machine with vertical blades which turn right and left continuously. The power harrow does not turnover the soil and keeps the moisture inside. Since the blades turn to the right and left, it does not hold any soil or mud. Vertical operation increases the water intake of the soil. It allows the plant roots to develop faster by preventing stratification deep in the soil. A specially adjusted blade alignment increases efficiency while reducing vibration. It prepares the seedbed, also eliminates weed and plant residue. A seeding machine connection tool makes preparing the seedbed and sowing at the same time possible. -Universal 3point CAT II Linkage -1 3/8’’ Z6 Spline PTO Protective Shaft -4 Speed; Double Outlet PTO Gearbox with 5407501000 rpm provides -2500/3000 min195 max 361 -3500/4000 min236 max437 Rotor Speed -30cm Length 15 mm thick High Quality Blades.

The 5-axis portal milling machine FZ 25 is a universal solution for the machining of highly complex and at the same time voluminous components. Model materials as well as composites through to light alloys can all be machined with this HSC gantry machine. This machine range fulfils the specific requirements of many sectors: - In the automobile design where large models need to be produced (e. g. cars on a scale of 1:1). - In pattern and tool making, especially in connection with very large workpieces with deep contours need to be machined (e. g. large rotation-symmetric moulds such as tanks and pools, etc.). - In the boatbuilding and shipbuilding industries, where huge work areas are required in all three axes, since the components are often elongated in shape. - In the aircraft industry, e. g. for milling panels, other large parts and components with extreme contours. In the wind energy industry with its long thin blades and bulbous hubs.

POWER HARROW is a tillage machine with vertical blades which turn right and left continuously. The power harrow does not turnover the soil and keeps the moisture inside. Since the blades turn to the right and left, it does not hold any soil or mud. Vertical operation increases the water intake of the soil. It allows the plant roots to develop faster by preventing stratification deep in the soil. A specially adjusted blade alignment increases efficiency while reducing vibration. It prepares the seedbed, also eliminates weed and plant residue. -Universal 3point CAT III or CAT IV Linkage -1 3/8’’ Z21 spline PTO Protective Shaft -1000 rpm gearbox provides 361 rpm rotor speed -30 cm length 15 mm thick high quality blades -Packer roller with sludge separator -Rotor prevention system. (Developed by Toscano; prevents hose, rope, wire etc. tangling)

Köylü Field shredder; also known as Flail Mower or Chopper; is used to shred plant wastes after harvest. All the plant wastes and residues got broken in very little pieces. With the process, residues can dissolve in the soil easily. The process enhances soil microorganisms, so; soil quality. It can be also used as weed mower if needed.

Product comes with brushless 48V DC spindle with manual control. Working area is 340x240x126(mm). The frame is made of aluminum and the device can cut pieces up to 240x240x65 (mm) with precision and without any displacement. All types of wood, plastics (ex: POM.), soft metals (ex: aluminum) can be processed. Product is suitable for PCB milling. Axis precision is 0.07mm. Spindle bit holder is ER-11. X and Y axis speed is 800mm/min and Z axis is 600mm/min. Linear movement is done by three nema 17 step motor. Step motors are controlled by TB6600 drivers. Control card is MKS DLC. V2.1. Raptorex Mini requires computer connection to operate and is compatible with both open source and paid software. Product works with GRBL codes. Net weight is 23kg. Our device works silent and does not create vibrations. You may use our device on most regular tables. Product comes ready to operate, you may plug in and start operating.

PRODUCTS CODE: ATS - 600 TANK CAPACITY : 600 LT PUMPS SPECIFICATION MODEL : MTS-371-S PISTON : 3 FLOW : 71 LT SPEED : 540 PRESSURE :45 Bar CONTROL UNITS : MTS-50-R-3 BOOM SPECIFICATION BOOM : 12 MT BOOM ADJUST. : MANUAL HEIGHT ADJUST. : MANUAL NOZZLE : 24 HP : 35

PRODUCTS CODE: ATO - 1000-16 TANK CAPACITY :1000 LT PUMPS SPECIFICATION MODEL: MTS-496-D PISTON : 4 FLOW : 96 LT SPEED : 540 PRESSURE : 50 Bar CONTROL UNITS : MTS-50-R-5 BOOM SPECIFICATION BOOM : 16 MT BOOM ADJUST. : Manuel HEIGHT ADJUST. : Hydraulic NOZZLE : 33 HP : 40

Small Earth Digger Loader & Stripping, Agriculture Earth Digger, Lifting Earth Digger, Single Levelling Bucket, Double Side Hydraulic Levelling Bucket, Levelling Bucket,

Products Code:CTT-1600 Tanks Capacity:1600 LT. Kind of Tank :Polyester Kind of Chassis:Profile Pumps Model :MTS 145 N Piston :4 Mebran Pumps Flow Rate:145 Lt./ Dk. Pumps Pressure:50 Bar Control Units :Bymatic Fan Diameters:90 cm Nozzle :16

71lt/min Flow Rate, 50 bar, 540 rpm, 20 parts conical nozzles, 137kg, 50 cm nozzle distance, Agriculture Spraying Insecticide Machinery

Products Code:ATT-400 Tanks Capacity:400 LT. Kind of Tank :Polyethylene Kind of Chassis:Profile Pumps Model :MTS496 P Piston : 4 Mebran Pumps Flow Rate:96 Lt./ Dk. Pumps Pressure:50 Bar Control Units :MTS 50 Fan Diameters:75 cm Air Flow Rate :8 Injector :10

Product comes with 500 watt Arel AC Monophase Spindle with manual and computerized control. Working area is 340x360x126(mm). The frame is made of aluminum and the device can cut pieces up to 240x360x115 (mm) with precision and without any displacement. All types of wood, plastics (ex: POM.), soft metals (ex: aluminum), hard metals (ex: iron, brass) can be processed. Product is suitable for PCB milling. Axis precision is 0.03mm. Spindle bit holder is ER-16. X and Y axis speed is 2400mm/min and Z axis is 1200mm/min. Linear movement is done by three nema 23 step motor. Step motors are controlled by TB6600 drivers with 24volt PS. Control card is MKS DLC. V2.1. Raptorex Pro requires computer connection to operate and is compatible with both open source and paid software. Product works with GRBL codes. Net weight is 39kg. Our device works silent and does not create vibrations. You may use our device on most regular tables. Product comes ready to operate, you may plug in and start operating.

Max. Traverse (X/Y/Z axis) 2100 X 1560 X 1580 mm