Disks- magnetic - Import export

Sintered hard ferrite magnets are manufactured by a die pressing followed by sintering process which allows economic production of components in a varied array. Sintered hard ferrite magnets are manufactured by a die pressing followed by sintering process which allows economic production of components in a varied array of sizes and shapes. Ferrite magnets have excellent corrosion resistance and have normal operating capabilities between -40 °C and +250 °C.

Doubleacting pneumatic cylinder in constructionoptimised design acc. to DIN ISO 15552. Piston rod with external thread, position detection and adjustable pneumatic damping. Due to their robust construction, these cylinders are the preferred choice for numerous applications.

Ball, aluminium. Magnet, neodymium. Body, steel. Holding ring, steel lined with leather. Version Anodised. Holding ring chemically nickelplated. Note The magnetic clamping balls are used to gently hold components in the optimum working position during e.g. polishing, assembling and laser welding. Swivel angles of up to 90° can be set, depending on the workpiece geometry and weight. The magnetic ball can be turned on and off using the Tgrip hex key provided.

Housing plastic. Magnetic core hard ferrite. Note These magnets are often used on notice boards, whiteboards and magnetic boards. Drawing reference 1) Magnetic face 2) Magnet 3) Housing

Housing, steel. Magnetic core NdFeB (neodym). Protective rubber jacket, synthetic rubber. Housing, electro zincplated. Black protective rubber jacket. Shallow pot magnets with tapped pin, shielded system. With rubber protective jacket for protecting sensitive surfaces. The coefficient of friction is increased by the rubber jacket so that high lateral friction is achieved. magnetic face 2) magnet 3) rubber

Housing, steel. Magnetic core AlNiCo. Hard magnet in aluminium housing and steel jacket. Shielded system. Pot magnets are used for retaining, lifting and mounting in fixtures. Due to the painted surface, the diameter D can be up to +0.8 mm.

Housing brass. Magnetic core NdFeB (neodymium). Smooth design, shielded system. Under no circumstances may Neodym magnets be pressed directly into iron, loss of attractive force due to magnetic short circuits occurs. Diameter “D” ground to an h6 tolerance. These magnets can be shortened by the dimensions “H1” and “H2”. The magnets can be mounted by pressfit, screwingin or gluing.

Housing, steel. Magnetic core hard ferrite. Shallow pot magnets, shielded system. Hairline cracks in the magnetic material are unavoidable for technical reasons in D=80, D=100 and D=125 versions. They do not impair the attracting function of the magnets in any way.

The workholding magnets 090602010 to 090602030 consist of a permanent magnetic system with fine pole divisions (4 mm) which are effective on two or three faces. To clamp extremely thin steel parts we recommend the magnet 090602040 with the finest pole division of 1.3 mm. The magnetic lifespan of the workholding magnets under conditions prevailant in industrial machining is unlimited. Approximately half the height of the workholding magnets can be ground down or polished away with no significant impairment of the magnetic strength.

Permanent magnetic chucks type PMNEO are super strong, compact plates for heavy cutting. Parts from about 30x15x6mm can be stretched with max. achievable holding forces. Good holding forces can be achieved even on rough surfaces. Optional pole blocks can be built on the PMNEO. This allows turning up the workpiece so that all sides are freely accessible, can be drilled on the magnetic clamping plate and leaves more space for accumulating chips around the component. This allows long-running HSC milling-pieces never sink into the resulting chips. The chipboard is activated via a removable hex shifter. The PMNEO magnetic clamping plate, in 48mm height, is prepared to integrate reference elements directly into the magnetic chuck, so that no additional spectrum is required underneath the magnet.

FXL-R round magnetic chucks in square pole technology are especially suitable for use on the lathe and on rotary tables of machining centers. The frame construction of the FXL plate can be equipped with centering elements at the front on the clamping side as well as at the rear. All FXL magnetic chucks can be operated with FXL-C or FXL-CT control units.

FXL magnetic clamping blocks are available in many sizes and designs. They can be manufactured with one or more clamping surfaces and different pole sizes. As with the FXL magnetic clamping plates, they are controlled by an FXL-C control unit; optionally with only one channel or also with several channels in order to be able to control the individual clamping surfaces of a block separately.

Pole reversal controllers from the FXL-C family reliably control not only our FXL magnetic chucks, but almost all electro-permanent magnet systems on the market. Input voltages of 100-500 VAC / 50-60Hz and matching modulated, pulsed output voltages and pulse powers of up to 24 kVA are unique key data, which are only required under extreme conditions, but provide maximum stability in normal use. FXL-C is available from simple, handy table-top units to control cabinet versions for large-scale applications; stand-alone from manually operated, part-connected with feedback to the machine up to full integration into the machine control for automated applications.

Permanent magnetic chucks type PMNM are high precision plates for clamping small and thin parts for precision grinding and eroding. The low magnetic field height prevents magnetization of processing tools. The chipboard is activated via a removable hex shifter. PMNM palletising clamping plates are available in 3 versions: Structure: — Neodymium magnet system, steel body, — Transverse pole pitch 1.4+0.5 mm — Holding power 100N/cm² — Magnetic field height about 5 mm — Pole plate wearing limit 6 mm Recommendation: High-precision plate for grinding and eroding

Permanent magnetic chucks type PMNM are high precision plates for clamping small and thin parts for precision grinding and eroding. The low magnetic field height prevents magnetization of the processing tools. The chipboard is activated via a removable hex shifter. Structure: — Neodymium magnet system, steel body — transverse pole pitch 1.4 + 0.5mm — Holding power 100 N/cm2 — Magnetic field height 5mm — Pole plate wearing limit 6mm Recommendation: High-precision chuck for grinding and eroding

Super lightweight aluminum body for direct installation of clamping elements. The PMNM UPC pallet is delivered completely ready fitted to fit the Erowa UPC clamping system with original Erowa elements. Optional with handles and/or link Gripper. is used to clamp small and medium-sized workpieces. It works without an external power supply and is activated manually via a changeover lever.

Permanent magnetic chucks type PMNEO-X are super strong compact chucks for heavy cutting. Parts from about 30x15x6mm are stretched with max. achievable holding forces. Good holding forces can be achieved even on rough surfaces. The chipboard is activated via a removable hex shifter. Structure: — Double neodymium magnet system, steel body — transverse pole pitch 11+4mm — Holding power 150 N / cm2 — Magnetic field height 10mm — Pole plate wearing limit 6mm Recommendation: Super Strong chuck for milling

FXL magnetic chucks with pole type 70 are used to securely clamp workpieces from approx. 150x150mm with material thickness from approx. 15mm. Poles of size 70x70mm generate a magnetic field that penetrates approx. 18mm into the workpiece, which is why they are particularly suitable for larger workpieces. Very good air gap behavior also allows uneven workpieces to be clamped securely. In addition, pole extensions with a larger stroke can be used on 70 poles for height compensation. The nominal holding force is a super strong 160 N/cm2 = 7.8kN per pole.

FXL-CT table-top units are built for a maximum of 2 channels without preselection. They can be used to control magnetic chucks up to a total area of approx. 1.2m2. can be controlled. FXL-CT is designed as a table-top unit or to be attached to the machine wall by means of the magnetic feet on the back. The operation is carried out directly on the device.

FXL-RR magnetic chucks are especially suitable for the rotationally symmetrical machining of rings, sleeves and flanges. The radial pole pitch ensures uniform clamping over the entire contact area and additional mechanical positioning and clamping aids can be inserted into the T-slots in the poles. The T-slots provide the further option of also using mobile or fixed pole extensions to free the workpiece or to clamp it without pull-down.

Permanent Magnetic Circular Chuck Type RNF with neodymium magnet system and low height are used for clamping of small and thin workpieces. Structure: — Neodymium magnet system, steel body, — Max Pole pitch 1,5+0,5mm — Holding power 80N/cm² — Magnetic field height 4mm — Pole plate wearing limit 4mm — Switch travel MAG-ENT-MAG 180° Recommendation: Fine pole circular chuck for small parts

Magnetic Pin is made of 1 piece strong Neodymium disc (disk) magnet and 1 plastic mold or metal. They are small, easy to grip yet very powerful. We have 8 colors pin, they are beautiful and widely used in office, map, teaching etc. Color and size of magnetic pin can be made by customers' requirement.

Neodymium ring magnet ais also known as tube magnet, a round disc magnet with a straight hole along the centre, the hole in centre ensures great versatility. Most ring magnet is with north and south poles on the flat circular surfaces (this is called as axial magnetisation). The few exception that is diametrically magnetised is specifically marked. Also, Multi pole ring magnet, even radially magnetized ring magnet, is more and more referred in this industry now. Ring magnet is being designed into a new generation of motors, generators, hydraulic cylinders, pumps & sensors, rotor shafts and more. What's more, it remains very popular in high end loud speakers and high intensity separators. We are ready to make a custom ring magnet for your application, welcome to contact us for a further communication.

Customized And Versatile Neodymium Disc Magnet GP Magnets provides powerful, long lasting and inexpensive arc neodymium magnets for your motors and magnetic assemblies. Material: NdFeB, rare earth NdFeB arc magnets Technology: a new type of sintered NdFeB magnets Process and equipment, such as band casting, HDDR technology. Magnetic properties: A. High coercivity B. (BH)max from 33 to 53 MGOe. C. Maximum operating temperatures up to 230°C. Grades: N33-N52, 33M-48M, 33H-48H, 30SH-45SH, 30UH-38UH, 30EH-35EH Magnetic Direction: Axially Magnetized, Diametrally Magnetized, Thickness Magnetized,Multi-poles magnetized, Radial Magnetized. (Customized specific requirements magnetized) Size: Customized Neodymium Magnet Sizes Coating: NI, NICUNI, Zn, NiCU-Gold, copper, Epoxy, NICU-Epoxy, chemical, propylene, etc. Applications: Industrial Magnet, Toy Magnet, Health Magnet etc.