Fans for industry - Import export

Novelty Steel is an experienced fabricator of structural steel fabrications for plant constructions such as Bulk Handling Equipment, HRSG plants, Steel and Wood Industries. Some examples of the fabrications are: Steel Silos and tanks Inlet Ducts and Silencers Stair Towers Bunkers and Hoppers Pipe Supports Exhaust Stacks Our modern steelwork fabrication shops have computer-aided design and detailing (CAD), which is linked directly to factory floor computer numerically controlled (CNC) machinery, creating a genuine seamless CAD/CAM environment. The accuracy of the computer-generated details being transmitted directly to the CNC machinery increases the quality standards of the production. Novelty Steel has adapted EN 1090-2 standards into its manufacturing processes supervised by experienced quality management team.

Industrial Fans - Comprehensive production

Wear-protected industrial fans. Wear-protected industrial fans Solids are often transported with the air that are very abrasive (e.g. corundum, sand, quartz, wood). These solids lead to considerable wear, in particular of the fan impeller. Progressive loss of material takes place, which can lead to machine failure. By means of specific measures to prevent wear, the service life of the fan can be extended. In addition to a suitable blade geometry, austenitic manganese steels and build-up welds can be used to counteract impact and sliding wear.

Energy Industry for Thermal Plant, S3552N Material, 10300 Kilograms

Repair or maintenance of fans. Repairs Fan impellers are often subject to high degrees of wear due to the solids in the conveying medium. Preventative maintenance helps to save costs, because a completely destroyed impeller can only be replaced by a new one. An impeller that is only partly damaged can easily be repaired and is comparable to a new impeller with regard to its subsequent service life. Naturally we also repair fans not made by us. Balancing and inspection of bearings The increasing demands on the performance, smooth running, weight, quality and life span of machines mean that increasing importance is also attached to mechanical vibrations. Balancing helps in most cases to eliminate the vibrations or at least to reduce them to an acceptable level. The fact that mechanical vibrations are not only unpleasant but also damaging is shown by a drastic shortening of the lifetime of gearboxes and roller bearings as well as the occurrence of fatigue fractures or unacceptable noise. The diagnosis is imbalance or bearing damage. Both causes result in elaborate repair work. While the bearings can be exchanged by the user’s service technicians, external services are required for the balancing of a fan impeller, since a balancing machine and special know-how are needed for this. Rippert uses state-of-the-art balancing machines in accordance with DIN ISO 1940 for this. Stationary balancing Rotor size: max. DN 4,000 mm Rotor weight: max. 10,000 kg Measuring procedure: force measurement Balancing quality: Q 6.3* * other qualities on request On-site balancing In addition to stationary balancing in the factory, Rippert also offers on-site balancing. This saves elaborate disassembly and assembly work as well as time-consuming and, depending upon size of the impeller, expensive transport.

Rippert offers a multitude of accessories for fans. Accessories

For pressure ranges from 3,000 to 16,000 Pa. High-pressure fans The field of application of high-pressure fans extends over almost all branches of industry. Our high-pressure fans cover a pressure range from 3,000 to 16,000 Pa. Thanks to their simple and solid construction, these fans know how to convince. Whether they are used as a blower in an industrial washing machine or as a ventilation fan in a compost works, these machines perform every day.

For the transport of large solid particles with the conveying stream. Transport fans Fans can also be used for the transport of materials. A suitable blade shape and the employment of open impellers enable the transport of large solid particles with the conveying stream. Thanks to our large selection of impellers we can ensure the trouble-free flow of material. Apart from the wood industry, our clientele includes the plastics and paper industries.

For the conveying of explosive dusts or gases. Explosion-proof fans For the conveying of explosive dusts or gases, out fans are equipped with spark protection at the impeller inlet. Both the shaft seal and the drive train comply with the regulations of the European ATEX directives.

For the conveying of gaseous materials. Gas-tight fans If the conveying medium of a fan must not be allowed to penetrate to the outside (e.g. gases that are harmful to health), our fans are equipped with a multi-chamber labyrinth seal on the shaft gland. Depending on requirements, the seals are provided with a sealing gas connection or a grease seal. Under certain circumstances the sealing gas can also be connected to the suction side of the fan. Naturally the flange connections are sealed accordingly and the fan housing is welded gas-tight and tested.

With direct drive, V-belt drive or coupling drive. Industrial fans Fans are used in countless industrial plants. If the fan fails, the plant must be shutdown and production stopped. These fans are in operation around the clock, often under adverse conditions (heat, wear and aggressive media), in order to guarantee the production process. Our fans prove their reliability every day in the cement, glass, steel, wood or recycling industries, to name but a few examples. Our fans are used in the foodstuffs and chemical industries as well as in mushroom growing or agriculture. We offer you an individual technical solution adapted to the respective conditions which, in addition to function and reliability, also takes into account energy efficiency. In partnership-like cooperation with our customers, we develop economically sensible ventilation systems. Our range of services extends from planning, manufacturing, installation and commissioning to after-sales service. In addition to on-site balancing, we supply you with spare parts and also install them on request.

The WOKS DOSPEL Ø350 industrial fan is a powerful axial fan, ideal for industrial applications. It has an impressive airflow of 310 m3/h, which makes it perfect for circulating and cooling air in large spaces. Equipped with a ball motor, this fan provides reliability, durability and quiet operation. The solid construction and easy wall mounting make it ideal for air circulation in industrial spaces, ensuring convenience and comfort of work. With this fan, employees can enjoy optimal working conditions and the industrial environment can be properly ventilated and cooled.

The WOKS DOSPEL Ø200 industrial fan is a powerful axial fan, ideal for industrial applications. It has an impressive airflow of 850m3/h, which makes it perfect for circulating and cooling air in large spaces. Equipped with a ball motor, this fan provides reliability, durability and quiet operation. The solid construction and easy wall mounting make it ideal for air circulation in industrial spaces, ensuring convenience and comfort of work. With this fan, employees can enjoy optimal working conditions and the industrial environment can be properly ventilated and cooled.

Serie LPE HELICAL FANS FOR WALL The LPE serie’s fans, present constructive characteristics that allow both the utilization in the industrial applications and the installations in the tertiary environments (workshops, stores, breedings, glasshouses) where there is the real necessity of the employment of a fan with easy installation, low consumptions, and reduced noise pressure levels.

USAGE AREAS -It is used in the heating industry for burning solid and liquid fuels in boilers and providing secondary air in a controlled manner. -In the ventilation of closed environments -In industrial machinery belonging to the jewelery sector -in the textile industry -In mines and mushroom farms -In plastic injection machines -In the combustion air supply of gas, diesel burners -In humid and humid environments -In the greenhouse industry -In chicken coops -Used in many areas of the manufacturing industry

These fans, which are used in the ventilation of closed environments, can operate without problems with their high performance, they can operate even at high temperatures since the engine is outside of the air flow.

These fans have low heights, they are suitable for car parks with a height of less than 2.4m or with cassette entrances. They can operate continuously for 2 hours at 300 and 400 °C. F400-120 / F300-120

ERF-CAT double suction centrifugal cell fans are produced in different sizes between 1.000m³/h and 20.000 m³/h flow rates. Cell panels are 20 mm thick and 70 kg/m³ density rock wool insulated. They provide maximum efficiency with low energy and vibration-free operation.

The propellers of AKAP sleeve fans, which can meet high air flow rates and high pressure losses, are made of aluminum raw material and they provide the chance to change the flow and pressure by adjusting the blade angles. They can be produced with a motor that can withstand temperatures of 200, 300, 400 °C for 120 minutes upon request.

manufacturer of all types of Axial fans

Since the impellers are made of aluminium as areas of usage gas plants and acidic places preferred. Aspiration of smoke, iron foundry, cement plants, and paper mills Aspiration of moist and dusty air Industrial buildings, animal farms, greenhouses, garages, sport centers, and parks etc.

Fans in different sizes, sucking or blowing from SPAL in the 12V range. We also offer 24V, 230V and 400V fans.

Thanks to the high level of modularization, we can cater to specific customer requirements and develop tailor-made solutions as a matter of course. Scheuch COMPONENTS offers customized production of radial fans to accommodate special customer requirements. Thanks to our extensive expertise, customers are guaranteed maximum availability and a long service life, regardless of whether the air is carrying chips, fibrous material or aggressive or explosive gas mixtures. As a result of using fans in entire systems, Scheuch COMPONENTS has acquired a wealth of experience with specific requirements in a wide range of sectors and industries. For example, hot gas radial fans for high temperatures or double flow radial fans for large volumetric flows. For systems that need to be cleaned more frequently, SwingOut & PullOut radial-fans can be used.

Radial fans are an indispensable part of most operational processes in ventilation systems. In cases where extremely large volumes need to be moved or transported, or where a critical impeller mass is exceeded, radial fans with bearings at both sides are an ideal choice. This type of equipment is available in single-flow and double-flow versions. However, the robust design of Scheuch COMPONENTS radial fans makes it possible to achieve large volumetric flows even with unilateral bearings (i.e. single-flow systems). Bearings can be provided on both sides if requested by the customer, and this configuration is implemented as standard above a critical impeller mass. With their flow-optimized suction pockets, double-flow radial fans make it possible to create efficient designs for transporting and diverting conveyed media – even when space is tight. Altogether, there are various factors and criteria that make double-flow radial fans a favourable option.

IDS 30 OIL HEATER FANMobile heating power on wheels: The IDS 20 D direct heaters for fast, uncomplicated heating With robust design, the oil heater IDS 30 has everything you need for an economic and effective heating application. This device from the IDS pro series is very flexible. On the one hand, its carriage with big wheels enables a quick transport and easy set-up even on building sites and uneven terrain. On the other hand, there is no need for an external oil tank because of the integrated fuel container. The oil heater fan is originally "Made in Europe" and as standard equipped with electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling. Additionally, the double-walled housing with protective coating increases safety at work by minimizing the surface temperature of the outer casing and thus the risk of injuries and further offers an effective soundproofing.

IDS 80 OIL HEATER FANThe robust IDS 80 oil fan heater for fast, uncomplicated heating - mobile heating power on wheels This oil heater fan of the IDS pro series is especially suitable for longer heating applications, because it is possible to connect an external oil tank in addition to the integrated fuel container. The double-walled housing with protective coating ideally absorbs sound, minimizes surface temperature and thus the risk of injuries. Electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling are further safety measures. The carriage and big wheels provide sufficient flexibility. Especially when working on building sites, the location can simply be changed. The oil heater fan IDS 80 further comes with a connection facility for an air transport hose and a two-way hose distributor.

OIL HEATER FAN IDE 80Our most powerful indirect oil heating fan IDE 80 is our recommendation for construction sites, halls, agriculture and workshops! So much hot air for so little money — this is the successful concept of the IDE series which also applies to its currently largest member. The oil heater fan IDE 80 has a heating capacity of 80 kW setting new standards for its own class as well as for heating at construction sites, in workshops and halls as well as in agriculture. The optional flue gas discharge allows flexible use of the indirect-fired oil heater fan IDE 80 for heating enclosed spaces. The IDE 80 is then fired with diesel or fuel oil. Continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss injection pump. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.

IDS 45 OIL HEATER FANThe robust IDS 45 oil fan heater for fast, uncomplicated heating - mobile heating power on wheels The professional heater fan IDS 45 is suited for an uncomplicated and quick heating of storage spaces, workshops, building sites, green houses or stables. Thanks to the integrated oil burner with Danfoss® pump it operates economically and effectively in every heating application. Owing to its robust design and convenient carriage, the device can quickly be transported from A to B by one person only and thus enables a quick change of location. Safety is the top priority of the oil heater manufactured in Europe. The housing is double-walled and with its protective coating provides an optimum soundproofing while simultaneously minimizing the surface temperature of the outer casing and thus the risk of injuries for the user.