Manual sawing machines - Import export

-RPM selection for different materials with the 2-speed motor -45° right hand to 45° left hand saw positioning, accurate and precise cutting in two directions -Coolant circulation to remove materials' chips and to cool the disc -Adjustable gear according to the size of the material -Comes with a stop rod for repeatable cuts -24 V low voltage system -Emergency stop button -Safety regulations,according to CE Standards -Moving saw protection guard -Motor protection kit -Burr-free cutting -Hassle-free performance

-RPM selection for different materials with the 2-speed motor -45° right hand to 45° left hand saw positioning, accurate and precise cutting in two directions -Coolant circulation to remove materials' chips and to cool the disc -Adjustable gear according to the size of the material -Comes with a stop rod for repeatable cuts -24 V low voltage system -Emergency stop button -Safety regulations, according to CE Standards -Moving saw protection guard -Motor protection kit -Burr-free cutting -Hassle-free performance

As a market leader for circular building site saws and with more than 80 years of experience, we know what is important. With this knowledge, we work continually to keep products up to date, thereby offering the highest-quality, most durable and safest machines.Changes in the machinery directive For improved safety, we have developed a safety hood that has proven to significantly reduce occupational accidents as part of the revision of standard EN 1870-19 prior to the amendment of the Machinery Directive 2006/42/EC. This was awarded the EURO Test Prize of the EU Builder's Trade Associations. Since the new machinery directive went into effect in 2010, all new circular building site saws have been equipped with the newly improved safety hood and other essential safety components and have been delivered exclusively in this version.

Avola building site table saw ZBV 500 S with height and tilt adjustment and safety guard. The new ZBV 500-S is a height and tilt adjustable building site circular saw with a 500 mm saw blade. The ZBV 500-S also enables bevel cuts with a high cutting height on the construction site. Above all, the increasingly used insulating material can be optimally processed in connection with the AVOLA special circular saw blade HM / A / PH (see above).

REVOLVING CROSS CUT SAW WITH NC PROGRAMMING SYSTEM GAMA 65 K3 Fully automatic circular saw for positioning and controlling via touchscreen with length measuring system EXENSO COMFORT (Pusher system) Application Length stop system (pusher operation), revolving table and sawblade inclination via servo - motor for positioning ( cross cut, mitre cut or compound mitre cut) of heavy workpieces, i.e. carpenter industry, gluelam industry, log house industry, wooden frame work, solid wood, etc. Technical Equipment : - Motor rating 8,1 kW / 400 Vac-50Hz, star / delta start, direct driven - Motor speed 3.000 rpm - Electrical sawblade inclination 90-30° via servo motor - Laser light for cross cutting - Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm - TCT – sawblade 650 x 30 x T 54 - Dust extraction spigot 125 / 80 mm - Revolving table 20° - 160° - Horizontal material clamping system, right - left - pneumatische Kappvorrichtung über ZweihandSteuerung/vollautomatisch

Standard equipmentwith tilting alu sliding table 1000x800 mm Cutting height 424 mm Cutting length 700 mm Roller diameter 500 mm Saw band length 3720 mm a) for three-phase current 400 V, 50 Hz, motor power 1,3 KW b) or alternating 230 V, 50 Hz, motor power 1,3 KW only saw band, to be selected according to the type of stone material with jack rings and 2 rollers Sound emission Lpa according to DIN 45635, part 1651 on gas concrete and lightweight refractory bricks ...75 dB(A) on Poroton ...................................... 88 dB(A) Size LxWxH: 1000x1000x1800 mm Weight: 130 kg

Diamond Wire For Quarry Applications Granite and hard stone The yellow rubber protection of the TYROLIT diamond wires for quarry applications ensures impressive resistivity and durability. Long lasting assembly High cutting speed Reinforced patented rubber assembly Bead specifications for high performance machines

The automatic plate saw VPS60-160A is BEHRINGER's solution when it comes to fully automatic cross-cutting of large plates and blocks. The vertical arrangement of the saw band has clear advantages over the horizontal design, as the engagement length of the saw band is significantly shorter. As a result, the cross cutting plate saw offers significantly higher cutting capacities while at the same time reducing tool costs. Thanks to their robust basic design and high-performance components, the automatic plate saws of the VPS series are designed for demanding applications in the steel trade, industry and metal production. From non-ferrous metals and aluminum to simple work steels and difficult-to-cut materials such as Inconel or titanium. Their modular design allows the cross cutting plate saw to be individually adapted to the customer's application.

Double Column Bandsaws with linear guideways are ideal for MITRE cuts with different quantities. With the movement of the bow, it’s possible to cut between 90° and +45°. With height adjustment and hydraulic cutting, control allows the bow to go up over the material after the cut. All this process is controlled by a digital counter on the control panel and total duration for one cut decreases. Fixing the bow at any angle is controlled by the hydraulic brake system.

The Metlsaw NF range of plate saws are the premier saw for precision sawing of non-ferrous plate from 6mm – 300mm thick. Fully automatic sawing system Up to 12" thickness capacity 50 HP Arbor Motor Positioning (cut to length) tolerance to +/- 0.075mm Surface Finishes to 8 Micro-inch High speed close tolerance cutting Can eliminate/reduce secondary machining of parts Fast set up and part number memory Rapid sawing speeds Full size touchscreen operator interface PLC Controls by Rockwell Automation (AB) Easy Blade Change Available widths of 1.8M – 6M as standard

This Semi-Automatic Vertical Bandsaw is a large capacity machine that cuts aluminium, ferrous and non-ferrous materials.

The NCH plate saws are designed for quick and accurate cutting of bars and plates into strips of varying widths. This allows you to reduce inventories of cut-to-width stock and increase the flexibility of your sawing operation. Models are available in a wide range of sizes. High-productivity Automatic machines, with moving arc from 4 to 6 meters cutting length.

Bomar Ergonomic 275.230DG Standard Details: Heavy duty one-piece cast bow Precision control hydraulic downfeed Substantial vices, quick set lever operation Bow rotates 45-90-60° Easy to read mitre scale Carbide blade guide pads and rollers Heavy duty blade tensioning unit Heavy duty, 3 phase motor Re-circulating coolant pump Adjustable guide arm Heavy duty gear train Blade speed: 35 & 70 m/min 500mm length stop included

The Bomar Workline 410.280DGH is a semi-automatic mitre bandsaw and is an ideal basic model for the production of steel structures. The both-sided mitre cuts continuously adjustable within the 0–60° range, with a large, easy-to-read angular scale. This machine features also an easily movable clamping vice for mitre cuts and a full-stroke hydraulic vice with a tightening system. Bomar Workline 410.280DGH Standard Details: 2 way mitre – 60° right, 60° left Easy to read mitre scale DRO for mitre angle Long stroke hydraulic vice Powered bow raise Adjustable back off valve for optimising downfeed speed relative to material mass Control box mounted on swinging arm Simple, robust push button controls Variable blade speed 20 to 120m/min Dovetail sliding vice for mitre cutting 27mm blade width Bed height: 756mm

Karmetal OSA 300x380 PLC Technical Details: • PLC control panel • Heavy duty construction • Hydraulic vice • Mechanical top clamps • Inverter controlled blade speed 25 to 90m/min • Hydro mechanical blade tension • Fast approach • Adjustable hydraulic regulation of the bow descent rate • Inverter driven blade speed • Swarf conveyor • 1.4 metre roller conveyor

Heavy Duty Automatic Bandsaw for solid bar, bundles & general sawing with the following features: Vice feed automatic with encoder for precision length set Twin hydraulic vices clamp both sides of material Simple input of component length and number of pieces via touch screen Steplessly variable blade speed 17 ~ 67m/mm Hydraulic blade tension control for optimum blade life. Variable downfeed control. The touch sensitive control screen provides easy selection of precise bar length requirement for a precise cut off length. The auto head-elevation reduces index cycling time significantly. The Blade speed is set and adjusted by acting on the touch sensitive control screen. There are quick-adjusting carbide saw-band guides, there is an idle wheel motion protector, a hydraulic band tension control, a quick-action HYDRAULIC twin-vice (split vice) 3-jaw clamping, a unique two-way vice jaw and an automatic chip conveyor.

DC 550 SK is a full automatic sawing machine which is designed for the strait or angular cutting operations of large size of profiles made of PVC and aluminum materials by means of double head sawing units equipped with Ø 550 mm of saw blades. Two-hand safety operation Equipped with CNC control system for precise angular adjustment Tilting range inwards 45° and outwards 22.5° Hydro-pneumatic saw feed Cutting accuracy +/- 0.1 mm 2 x pneumatic profile supports Windows based industrial PC and 15’’ LCD touch screen color monitor Facility to transfer the cutting list at ‘mdb’+'xls' format via USB and network Remote connection via internet and providing technical support Barcode printer & image print Automatic slicing feature Profile height measuring system (DC 550 SKH) The angle setting of the heads is ensured with servo control system The position setting of the moving head is en sured with servo control system STANDARD ACCESSORIES Equipped with saw blades 2 X Ø 550 mm

The panel saw machines perform the horizontal cutting of cheeses of all sizes and consistencies, both hard and semi-hard. Starting from the basic model, the manually operated bench disconnector suitable for delicatessens and small businesses, the range of disconnectors also includes electric and automatic machinery, developed for intensive use, typical of industrial realities. They offer the possibility to cut a large number of cheeses with maximum precision and without any effort or loss of product.

Automatic upstroking circular saw with NC Programmable Controls. Yilmaz SK450 Standard Details Designed for high-volume straight cutting of non-ferrous profiles 4 – 6 second cycle time* High precision servo motors accurate to ±0.05mm* 450mm TCT blade with 4 kW motor Servo-controlled infeed speed and saw blade stroke adjustment Horizontal and vertical pneumatic clamping of the workpiece for precise cutting Automatic retraction of stock material at end of cut to protect the surface from scratches Single or multi-bar** (bundle) cutting Computer-controlled blade lubrication system System shuts down automatically after cutting the required quantity Interlocked safety guards Windows-based industrial PC with 7’’ LCD colour touch screen HMI & USB cutting job input Internet connection possible for technical support Automatic feeder stroke from 5 – 600mm. Maximum cutting length 9990mm Automatic end of bar sensor *Depending on material **Extra-cost option

SK 450 is designed for the strait cutting operations of the large size of profiles made of PVC and aluminum by means of Ø450 mm of saw blade at 90°. It is ideal for the serial and precise slicing operations. Suitable for high-volume slicing of aluminum profiles for window manu facturing and industrial applications High precision servo motors and inter nationally recognized components Saving of time by means of servo con trolled workpiece infeed speed and saw blade stroke Horizontal and vertical clamping of the workpiece during the sawing operation Automatic table retraction feature that moves the cut material a small amount after cutting and before the blade came back down to prevent the re-cut & scratches High cutting accuracy by means of the robust mechanical structure Programmable spray saw blade lubrication system via control panel Large memory capacity for the cutting programs The machine shut down automatically after reaching the requested quantity

Bimetal band saw blade with extra wear resistance Application: cutting steels with tensile strength up to 1700 MPa high alloy steel and stainless steel titanium alloys and nickel hard machined materials Characteristics.

This type of disc knives is especially popular on the equipment of the Italian company Gamma Meccanica SpA. main size is D800/d100, suitable both for cutting plates and for trimming edges. The main advantage of this disc is that no abrasive dust is formed while using it.

• Semi-automatic double miter for cutting profiles and solid material in steel and non-ferrous material and an excellent price-performance ratio • Manually swiveling saw frame with hydraulic clamping for optimal • Hydraulic clamping of the horizontal vise • Automatic saw frame raising on the cut end • Double speed motor 1.0/1.3 KW Gearbox • Sensitive cutting pressure regulation function of the material properties • Hydraulic-mechanical belt tension • Tape guide with hard metal pads sheets and rolls • Thermal overload protection and no-volt release • Automatic shut-off after cut end • Automatic belt break protection Driven