Open house - Import export

DryLin® R - Installation videos System selection & service life calculation DryLin® R - Introduction and technical information Special info on DryLin® R linear plain bearing L1 series drylin® igus® test method Liners and pressfit bearings Open and enclosed DryLin® R liners Linear Bearings Open, enclosed, split and self-aligning DryLin® R linear plain bearing Housing bearing Enclosed linear bearing, adjustable, split, in tandem design and as floating bearing DryLin® R housing bearing Flange housing Linear bearing with round or angular flange DryLin® R flange housing Carriage and linear housing Open or enclosed in several long designs DryLin® R carriage and linear housing Shaft end supports and shaft blocks Fixed and moving shaft end supports, shaft blocks in several designs DryLin® R shaft end supports and shaft blocks Shafts and supported shafts Shafts made of aluminum, steel and carbon fiber DryLin® shafts and supported shafts Linear round guide DryLin® R linear plain bearings are based on extremely wear-resistant polymers specially developed for the linear technology. The dimensions are compatible with standard ball bearings. The special geometry guarantees ruggedness even in extreme environments. DryLin® R - Installation videos Advantages: 100 % lubricant-free Dimensionally interchangeable with (recirculating) ball bearings Large variety of choice in housing shapes Shafts, shaft blocks and accessories available from stock 8 different shaft materials Replaceable liners VA stainless steel housing available When not to use it? When little installation space is available drylin® N drylin® W When twist-protection is required for single-axis systems DryLin® T DryLin® N Liners and pressfit bearings Open and enclosed DryLin® R liners Linear Bearings Open, enclosed, split and self-aligning DryLin® R linear plain bearing Housing bearing Enclosed linear bearing, adjustable, split, in tandem design and as floating bearing DryLin® R housing bearing Flange housing Linear bearing with round or angular flange DryLin® R flange housing Carriage and linear housing Open or enclosed in several long designs DryLin® R carriage and linear housing Shaft end supports and shaft blocks Fixed and moving shaft end supports, shaft blocks in several designs DryLin® R shaft end supports and shaft blocks Shafts and supported shafts Shafts made of aluminum, steel and carbon fiber DryLin® shafts and supported shafts

Potentiometric position transducer in cost-optimized compact design; open housing for mounting in closed devices; variable mechanical customer interface; basic version for customized solutions

The remote data transmission unit ADT1-Box is encased in a robust, water-tight plastic housing. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via KOLIBRI Cloud from KELLER.

The remote data transmission unit ADT1-Tube is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via KOLIBRI Cloud from KELLER.

Local filtering plant FA 27 are designed to eliminate sawdust, dust and chips from one-two machines, they are installed in the workshop directly near the machinery. Productivity – 4800 m³ / hour. Plant of this series differs from similar vacuum cleaners on purpose, the innovative decision of supply of the polluted air in plant. The solution developed by engineers of the company allows to prolong service life of filters and provides long service life of plant in the declared parameters. Bag filters provide air filtration with a particle size of 10 microns, the degree of air purification is 99.5%, the hoses are cleaned due to the flow of air from the main blower and the force of gravity. Plant on bag filters, made of powder-coated steel with open housing and blower. Filtering plants are equipped with the blower with high suction power and high efficiency, a filter compartment with reliable system of fastening of filters, a bag for collecting waste.

The Statox 560 might be one of the safest gas detectors at all. Functional safety level 2 tells you how low its probability of failure on demand is. Furthermore a self test with the target gas assures that a failure - how unlikely ever - can never go unnoticed. The fact, that the self test is not only capable detecting a failure, but also maintenance request. This saves a lot of time for inspections. The Statox 560 is in any aspect a state - of - the - art product: - The new sensor generation features high sensitvity, fast response, low interferences and plug - and play technology. - The gas generators produce the target gas and thus offer a 100 % proof that the all components are in perfect condition. - The output signal is either a 4 - 20 mA analog signal or a RS 485 signal. - The electronics are well protected in an Ex d housing with window. The self test can be triggered in programmable time intervals, or manually with a magnetic pin. With this tool you can also set parameters without opening the housing. No hot work permit required! - The sensor module holds the sensor, the generator cell and a micropump. It is an Ex i module, i. e. for work on this module there is also no hot work permit required! The module can be replaced completey by another. This design reduces the work in the field to an absolute minimum. The Statox offers 100 % safety plus utmost operator conveniance! The Statox 560 will come to the market end of 2015. Self test

Automatic static or rotative tool changer and cutting tool measurement sensor. Possibility of housing with automatic opening/closing. Subject to the machine configuration / chosen options. Online sales on Meca-line site here

Pharma Design - Series H 630 - 1600 P The HEINKEL horizontal peeler centrifuges in pharma design are characterized by easy cleaning and inspection avoiding product contamination. Special properties for the customer’s benefit: Swinging open housing for easy inspection Clean room installation possible Hydraulically operated housing locking mechanism by single clamping elements, therefore minimal area for product deposit Fully automatic, validated CIP-process possible Design virtually free of dead spaces, minimized number of screwed connections in the process housing Filtrate outlet at the rear part of the process housing, low dismantling expenses to prepare for the opening of the housing High flexibility at frequent product changes Quick change of the filter element Bearing designed as exchangeable unit

Pharma Design - Series V 1000 - 1250 BP Vertical peeler centrifuges type V 1000 – 1250 BP in cGMP execution are mainly used in the pharmaceutical industry. The process housing opens and closes automatically, thus enabling the complete inspection of all components in the process area. Cleaning is carried out by means of an effective, fully automated CIP system and it is complete with the flooding of the process enclosure if necessary. The GMP and specification compliant documentation ensures optimum qualification. Special properties for the customer´s benefit: Small footprint cGMP compliant Automatic opening, respectively closing of the process housing Optimised product discharge Automatic CIP cleaning Easy accessibility of all machinery parts in contact with the product

It is used for hanging flat optical cable on the supports of communication lines, power lines, light poles, between buildings and structures. It consists of an open housing with a ribbed contact surface, a wedge with an attached wire loop, and a «grater» — a perforated insert that is inserted between the cable and the wedge. The design of the clamp provides a firm hold on the cable. Product materials body, wedge, stainless steel insert, chrome steel hinge. It is recommended to be used for all sections of the cable route at practically any angles of its turn.

CellTRON® FOR MAXIMUM FILTRATION REQUIREMENTS The basis of this plant is a membrane filter press. The new product series is equipped with an innovative filter press emptying system with lifetime error message, an automated filter cloth washing system with implemented CIP cleaning function as well as an automatically opening and vacuum-proof housing. In contrast to conventional filter presses, this new development guarantees an almost gastight encapsulation of the filter press. The filter press thus meets the specific requirements for dewatering special (metal) sludges. In addition to standard configurations for battery cell production, this technology series is also suitable for demanding applications that require the highest safety and efficiency standards. These include volatile, dust explosive products as well as substances with toxic and radioactive properties but also pharma food products and hot suspensions (≥130°C).

Black polyamide PA6 housing,handle,90° open or lock,Door Cutout: 150*25mm,ROHS compliance

Pressed peat moss tablets Ø 32 mm is manufactured for growing seedlings of various flowery and decorative cultures under domestic conditions, on plots of land attached to a house, in the open and protected soil. Tablet features: Pressed peat moss tablets Ø 32 mm are produced from high-moor milled peat dried to 27-29% moisture and pressed into the round form for pots with a volume 0.3 liter. Content of nutritious elements (mg/100g of dry substance): Nitrogen (ammonia and nitrate) 100 - 120 mg Phosphorus 150 – 200 mg Potassium 150 – 200 Trace substances: Cu, B, Mn, Mo, Zn, Fe Electroconductivity 0.5 – 1.1 mS/cm Tablet dimensions: 0.3 L – Ø 32 mm, height 7-9 mm, weight 7-8 g.

Pressed peat moss tablets Ø 32 mm is manufactured for growing seedlings of various flowery and decorative cultures under domestic conditions, on plots of land attached to a house, in the open and protected soil. Tablet features: Pressed peat moss tablets Ø 32 mm are produced from high-moor milled peat dried to 27-29% moisture and pressed into the round form for pots with a volume 0.3 liter. Content of nutritious elements (mg/100g of dry substance): Nitrogen (ammonia and nitrate) 100 - 120 mg Phosphorus 150 – 200 mg Potassium 150 – 200 Trace substances: Cu, B, Mn, Mo, Zn, Fe Electroconductivity 0.5 – 1.1 mS/cm Tablet dimensions: 0.3 L – Ø 32 mm, height 7-9 mm, weight 7-8 g.

The potentiometric displacement sensor series MBX is excellently suited for very limited installation space due to its extremely flat design with an overall height of only 7 mm. In addition, the universal cursor can be coupled mechanically in a flexible manner, so that no push rod is required, thus saving space in the customer's housing. With its open design, the displacement encoder is designed for installation in a customer housing.