Special transport - Import export

Goods lift for moving goods and passengers safely and efficiently Multi-passenger transport with ESCORTA - special option only from Lödige The ESCORTA goods lift is the ideal solution for easy vertical transportation in multi-level storage and production facilities. Thanks to its new certification (European Machinery Directive 2006/42/EG and DIN EN 81-41) multiple persons can now simply ride in the lift with their goods to the desired floor. This upgrade option ease the flow of goods and people, increases the level of comfort, making transporting goods between levels much easier and more pleasant. In its standard configuration, it has a load capacity of up to 3,000 kilograms and a lifting height of up to 18 meters (with two to six stopping points). The ESCORTA lift can be individually configured in great detail in terms of size, lifting height, materials and look. Cabin dimensions can vary greatly, with length, width and height each reaching nearly three meters.

We can produce light pallets but also pallets for much heavier goods (f.e. 3-4T). We can produce special pallets of different sizesof your demand (up to 4m long). Pallets on blocks (4-way entry pallets) or pallets on beams(2-way entry pallets). We can make pallets with a slot, pallets with OSB plates, boxes, pallets for windows, glasses etc.

UV-resistant Easily washable high density polypropylene tray Easy to install and store (foldable and stackable) Off-white or anthracite grey tray Easy to clean Foldable base under the table top (hammered grey colour) Double reinforcement bar under the top Can support a maximum load of 500 kg To help you handle the rectangular table, JAD Groupe also offers a transport trolley, specially designed for this model. This trolley can also be dismantled to improve storage of your equipment and is perfectly safe. Trolley on wheels diam. 120 cm with two braked wheels Can transport up to 20 rectangular tables Take advantage of personalised assistance now to get more information about our polypro folding table.

The devices are equipped with an exclusive label edge detector 'Mech Sensor System ". This automatically detects the leading edge of the label and provides absolute dispensing accuracy of form labels. There are no special transport cuts or sensor marks required. Suitable for label sizes of 18 x 20 mm up to 100 x 60 mm.

Keiper PU wide timing belts are made of abrasion-resistant polyurethane and high-strength aramid cords in widths up to 600mm. These timing belts are specially designed for synchronous transport applications. In view of the production width as well as outstanding mechanical and chemical properties, they can be used for many applications. Moreover, it is possible to use special materials such as, for example, polyurethane that is suitable for contact with foodstuffs, or a nylon coating on the tooth facing and back side. Properties and special features: High-strength aramid tension cords Parallel arrangement of tension cords for even distribution of tension Form-fit, synchronous running Low-noise, high abrasion resistance and flexibility Applications: As a substitute for transport belts for synchronous positioning Applications in the foodstuffs industry Sausage, meat and cheese processing Conveying of bulk goods

We process the following materials: ■ chrome-nickel steel ■ various types of steel ■ non-ferrous metals ■ various aluminium alloys steel processing, stainless steel, machine engineering, tool engineering, metal processing, sheet steel processing, material 16 Mo3, Hardox, 1.4301, 1.4571, 1.4404, S355, S235, metal products, steel products, supplier construction machinery, power station, energy station, offshore equipment, pipes, steel halls, metal construction, profiles, handrails, balconies, stairs, roofing, pallet warehouse, pallet inverters, scrap conveyors, transport racks, special frames, devices, die blocks, barrel press, fork shoes, fork extensions, industrial gates, fences, customized constructions, industrial service, furnaces, playgrounds, sports fields, cladding, casing, housing, covers, noise-protection cabins, machine frames, large milled parts, conveyor technology, conveyor line, plunge pools, tank barrels and much more

ar feeder for special profiles wanted ? To extend the MULTI 3000 to the bar feeder for special profiles, the Uni-erector can be mounted optionally. It enables the erection of rectangular profiles and special profiles for further transport to connected machine tools. Thus a smooth reloading process is possible. By simply setting a parameter, the erector can be selected or deselected. This enables a quick changeover from round material to a special profile. By deactivating it, the bar loader can load round or hexagonal material as normal. While with activated parameter the bar feeder will load the special or rectangular profile while the reloader is erecting. The use of square material is also optionally possible. The erector consists of two opposite rollers. To erect the material, these rollers move together during reloading. When the bar is threaded into the machine tool, the rollers open again. The distance between the rollers can be easily adjusted.

Long-lasting staple products Though food-extrusion is often associated with "fun" products like snacks and breakfast-cereals in a wide variety of shapes, sizes, colours and flavours targeted to children, the technique is also employed for some staple foods. One such product category is that of "flat-bread" or "crisp-bread". "Flat-" or "crisp-bread" is essentially an extruded strip that is cut into specified length and dried to a low enough moisture level to enable a long shelf life under ambient conditions. The advantages of the extruded flat-bread are - Option of using various blends of different cereals to achieve desired taste, texture and nutritional value Long shelf life without special storage environment Easy transportation and use for different occasions Diverse uses; can be eaten with various toppings, or asa sandwich with a filling in between two slices.

Powerful derinding machine for large and small pieces of cheese. In addition to an ideal cutting width, the Weber Cheese Skinner offers product-specific height adjustment of the blade, meaning that natural and plastic rinds can be optimally removed. Maximum product yield is guaranteed. Advantages Powerful and with a compact footprint A special cheese transport roller and perfectly adjusted blades for optimal processing results Ideal cutting width for powerful derinding of large and small pieces of cheese Bolted blade with blade protection in cleaning position Unique geared brake motor with quick stop Options: special voltages

Combination machine for thick and thin: The AMS 533 TWIN skinning machine is particularly suited to processing cuts with thick tendonsand skin, such as pork loin, pork silverside, beef or veal silverside and boiled beef fillet. Advantages Removal of tendons and skin with one machine TWIN transport rollers and specially coordinated blades providethe highest possible yields Ideal cutting width for powerful skinning and tendon removal inlarge and small cuts Effort-saving work table design due to ergonomicmachine assembly Blade guard in cleaning position Gear brake motor with quick stop Product-specific precision adjustment Options: Quick-clamp blade holder for tool-less blade changing Body lever switch Skinning procedure protection Skinning gloves Special tension rollers

The smart solution: Fully-automatic defatting machine ASD 460 enables removal of fat layers from loins and cutlets in predefined strengths. Advantages Fully-automatic recognition of the fat strength using Weber camera technology, with programmable controlled movementalong longitudinal profile Continuous work process Sensor-controlled electronic spring for perfect pressure application Uniform fat layers Considerable minimisation of reworking (trimming) Back bacon instead of small trimming cuts Clearly improved product image for cooking after slicing Product-specific blade holders Combinable with pre-installed derinder Options: Special Weber transport rollers Product-specific blade holders Product-specific pressure devices for products withand without bones Fixed or adjustable guide plates for supply and output belts

Applicability: Intended for the packaging of potatoes, onions, fruits that require ventilation. Production: Manufactured 100% automated from sustainable raw materials. Personalization: highest level of quality in up to 10 colors and/or polychromes, including the special ones: gold, metallic silver with ecological water-based ink. Print resolution can easily reach 300 dpi. Options: product viewing window with a customized shape, can be sealed with Biodegradable PLA film to allow the packaging of products that require a controlled atmosphere, eg biscuits. They can also have handles for easy transport. Material: special waterproof paper with ventilation slots. White or natural kraft paper, various thicknesses (80-120 GSM), certified FSC, EarthCare, ISO9001, ISO14001. The most commonly sizes: 230 x 100 x 300 mm, 230 x 100 x 440 and 260 x 160 x 550 mm. Production capacity: more than 75 million pieces annually. Want samples and price quotes? We are waiting for your request.

The extensive and many-sided drum clamp programme of KAUP encloses attachments which clamp, tip and turn single drums. Other attachments can carry up to four drums pre and side by side. The wide port folio is complemented by special solutions for the transport of special drums, by slip-on drum arms and drum tipping arms for already existing fork clamps.

A 40ft ISO tank for refrigerant gases such as R134a, R22. R32. R507a. and mixed refrigerants is a specialized shipping container designed to transport ard store refrigerants in a safe and efficient manner. These SO tanks adhere to international standards set by the International Organization for Standardization (ISO). The size, construction, and features of a 40ft ISO tank vary depending on the specific refrigerants oeing transported.Key Specifications and Features of a 40ft ISO Tank for Refrigerant Cases:1. Size and Dimensions: Length: Approximately 40 feet (12.2 meters) Width: Standard ISO container width Height: Standard SO container height2. Material: Constructed using durable and corrosion-resistant materials, typically stainless steel, to ensure the safe transport and storage of refrigerants.3. Capacity:

The almost maintenance-free modusAOI MCS18/42-Inline was specially developed for transport conveyor modules in production lines. Existing lines can easily be retrofifitted with this system. The small, cost effective system comes with a 18 or 42 megapixels camera, control unit, modus software and led lighting inclusive controller. Characteristics: Single system for inspection of printed circuit boards from the top side. Combination of diverse application tasks such as SMD placement, pre-reflow, chip control, THT fitting, conformal coating and full screening for lost components. Reads barcodes and data-matrix codes in any position and quantity even on multi-PCBs.

KAUP attachments of the class T413 designed with high visibility are mainly used for in-plant, non-palletised transportation of bales of paper, waste paper, tobacco and textiles or also boxes and containers. Pulp, foamed plastic (polystyrene) wool and Big-Bags can also be transported with specially designed clamping arms.

Pallet in galvanized steel, welded. Specially developed to transport materials such as stones, marble, among others. Stackable and collapsible.

Spare parts kit. Optional spares kit are offered. Spare parts kit for 1st necessity, including one High Pressure valve of each type, a complete set of gasket and specific electrical device, sensors… Spare parts kit for 1st maintenance. Special tools. Transport & logisitics : Trucking, sea freight, FCA , FOB, CIF any optional prices following to INCOTERMS 2010. Packings. Packings are specifically engineered and prepared to suit a long-lasting protection of the compressor and its equipment throughout overseas shipping or simply road trucking. Packing consists of : thermo-welded protections to seaworthy wooden crate 4C, also preparation for container : ‘stuffing-lashing-securing’ – 40’’ High Cube and 20’’ Dry containers… Start up and commissioning. Installation & mounting supervising ,commissioning and training. Prior to all start up a commissioning PiCK list and commissioning preparation check list is communicated in order to facilitate the off-loading and positioning of the..

20 standard types of packaging Euro pallet or universal pallet Coil eye up and coil eye to the side Possibility of packing without a pallet in special transport (tray box/mould) Metallic or plastic packing tape Paper or stretch film Choose the right packaging for various options – different unloading transport and storage types

The Sardine Gutting Machine is meticulously designed for the specific task of gutting sardines, ensuring high efficiency and precision in seafood processing. Capable of handling up to 300 fish per minute, this machine features a transport system with specially designed belts to smoothly drag the fish through the gutting process. It performs both the trunk cut by the front and the belly cut by the side, utilizing two circular blades for the gutting system. Constructed from durable stainless steel AISI 316-304, the machine combines robustness with ease of maintenance. Its simple operation is complemented by a flip-top lid offering easy access to internal mechanisms, equipped with an electrical interlock for enhanced safety during maintenance or accidental openings. This gutting machine can seamlessly connect with any cutting-gutting machine on the market, offering versatility

EMS Makina is Manufacturer of Top and Rear Loading Waste Tranfer Compression Semit trailer(Refuse Trailer). *Capacity: 52m3 - 60m2. *Waste transfer semitrailer has benefits such as shortening the distance traveled, time saving and diminishing spare part costs, preventing the leak of waste water, lesser number of waste trucks at traffic and reduction of the visual pollution. *REFUSE TRANSFER SEMITRAILER IS USED TO TRANSPORT THE REFUSE COLLECTED IN CITIES WITH REFUSE TRUCKS TO LANDFILLS AT FAR DISTANCES ECONOMICALLY . IT HAS THE CAPACITY TO CARRY THE LOAD OF 6- 10REFUSE TRUCKS DEPENDING THE VOLUME OF THEM. For more information please contact with us!!

Can Cables are specially designed for the transport of empty or filled cans on short or very long conveying distances. The belts are made of very hard PU or TPE raw materials and some also have a steel reinforcement.

Feeding of filtered-out materials to silo systems over long distances (up to 700 m). Pneumatic medium-pressure conveyor systems For the conveying of filtered-out materials such as wooden splinters and wood dust or for the conveying of products in the derived timber products industry with large conveying quantities over great distances. Pneumatic medium-pressure conveyor systems are economical, reliable and enable flexible adaptations to individual conveying routes. The conveying air stream is generated by a rotary piston compressor. As opposed to fans, these have almost vertical characteristic curves; i.e. the volumetric flow rate remains almost constant as the pressure in the conveying system increases. This ensures safe material transport. Special cellular wheel sluices are necessary for channelling the conveying material into the conveying stream, such as knife gates for derived timber products. Cyclones, filters or combinations of the two are used to separate the conveying material from the conveying stream. The economical conveying lengths lie between around 150 and 750 m. The loading of the conveying stream can amount to up to 5 kg/m³ and essentially depends on the grain size, density and form of the material to be conveyed.

The LP2000 passport pre-personalisation machine automatically handles passports and e-passports in ICAO ID-3 size. Perforation laser, various numbering systems, and contactless chip encoding stations can be installed on the machine according to the specific project requirements. Thus a customised configuration with high level of flexibility and standardisation can be realised. A sophisticated double-step transportation mode allows parallel processing to reach a high throughput. Several software solutions create a high level of security and make operation very easy. Flexible, scalable design according to passport requirements Fully automatic handling of passports and e-passports Gentle passport booklet transport by special carriers Patented, space-saving chip encoding tower Laser perforation method (PERFLEX) Integration of customer specific technologies Easy integration into existing manufacturing setup Inline quality control Multiple Inline RFID chip controls (ATS, UID) Optional...

Our special load carriers and transport racks are designed and built in such a way that they can be easily integrated into your logistics concept, regardless of which stacking system you choose. For each special container, we first build a prototype, which can be extensively tested before the start of series production. In a dialogue with you, further constructive adaptations are worked out in order to finally arrive at the optimal solution.

Light lever pulldown will connect the plug and socket without fail ready to flow liquid or gases. This Cupla complies with diversified applications in liquid or gas transportation. Endface seal structure enables no bumps or hollows on the internal fluid passage, and ensures smooth fluid transportation. “Special lip seal” adopted (except 3/4”, 1” sizes and silicon rubber seal) for light lever action and tight and sure sealing when connected. Connection part dimensions comply with US military specifications MILAA59326. The variety of body materials, sizes and end configurations has been standardized to comply with wide range of applications. Additional stopper function design will enhance safety (madetoorder product).

The reliable AirWave standard film with 20µm is perfect e.g. as intermediate wrapper, crosswise wrapping and wrapper to protect your goods during transportation. Special print: Candy Backside: transparent 100% recyclable material 20μm wall thickness For heavy to medium goods Allround film for most applications Perforated for easy separation Made in Germany Compatible with the AirWave1, AirWave2 and AirBoy micro air cushion machine.

The reliable AirWave standard film with 20µm is perfect e.g. as intermediate wrapper, crosswise wrapping and wrapper to protect your goods during transportation. Special print: Stars Backside: transparent 100% recyclable material 20μm wall thickness For heavy to medium goods Allround film for most applications Perforated for easy separation Made in Germany Compatible with the AirWave1, AirWave2 and AirBoy micro air cushion machine.

The reliable AirWave standard film with 20µm is perfect e.g. as intermediate wrapper, crosswise wrapping and wrapper to protect your goods during transportation. Special print: Merry Christmas Backside: transparent 100% recyclable material 20μm wall thickness For heavy to medium goods Allround film for most applications Perforated for easy separation Made in Germany Compatible with the AirWave1, AirWave2 and AirBoy micro air cushion machine.