Metal structural parts - Import export

Metallized Ceramic Componenets: Innovacera supplies precision metallized ceramic parts in aluminum oxide ceramics for the medical, and aerospace industries. Through spray, needle, and brush coatings or screen printing our capabilities allow us to metallized on flat, cylindrical, and complex ceramic bodies. Moly-Manganese is the typical base coat materials used for metallization.In order to achieve the welding between ceramic and metal, the ceramic surface firmly adheres to a layer of the metal film, which is ceramic metallization.Refractory-metalized aluminum oxide ceramics widely use in power grid tubes, vacuum interrupters, and similar applications where metal to ceramic joints of exceptional strength and hermeticity is required. Specification >Metallization thickness: 25 ±10um >Nickel thickness:2~10um >Pin full strength: 4200kgf/cm2 avg. (at Φ3.0mm pin) Available Ceramic Composition >94%,96%,99%,99.

The water and gas pipe (DU) is produced from hot rolled sheet metal and is necessary for the installation of water and natural gas supply pipelines for residential and non residential buildings. Due to its low cost, the pipe is in demand in everyday life, mechanical engineering and at construction sites; metal products and steel structures , machine parts and other popular materials are produced from it . The vgp pipe is easy to install, its service life is from twenty to fifty years or more (time tested). In comparison with plastic counterparts, it is an excellent heat dissipating product and is more resistant to high temperatures and loads. Pipe DN GOST 3262 75 standard sizes from 15 to 50, wall 2.5 4 mm, length 6 lm. Longitudinal electric welded pipe is necessary for the production and construction of structural products, while the dimensional grid of longitudinal welded pipes differs in a larger direction from DU pipes F external 10 2000 mm; Wall up to 40 mm;

The water and gas pipe (DU) is produced from hot rolled sheet metal and is necessary for the installation of water and natural gas supply pipelines for residential and non residential buildings. Due to its low cost, the pipe is in demand in everyday life, mechanical engineering and at construction sites; metal products and steel structures , machine parts and other popular materials are produced from it . The vgp pipe is easy to install, its service life is from twenty to fifty years or more (time tested). In comparison with plastic counterparts, it is an excellent heat dissipating product and is more resistant to high temperatures and loads. Pipe DN GOST 3262 75 standard sizes from 15 to 50, wall 2.5 4 mm, length 6 lm. Longitudinal electric welded pipe is necessary for the production and construction of structural products. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

Ceramic components offer significant advantages over metal and plastic parts . They have a dimensional stability at high temperatures. They are good electrical insulators. They do not outgas in vacuum environment. Ceramics are inert materials and resistant to many gases and chemicals. They show high thermal insulating properties or high thermal dissipation. Applications and products Advanced ceramics are used in solid-state lasers (Nd-Yag..), gas lasers, fibre lasers, diode lasers, high-power laser diodes and IPL systems. Typical customized products from Microcertec are high-voltage insulators ionisation electrode plates, insulators for electrical feedthroughs,corona insulators, electrical insulators resistant to gas corrosion and plasma discharges, reflectors, heat sinks, 3D metallized ceramics, structural parts than can be brazed.

Ceramic components offer significant advantages over metal and plastic parts . They have a dimensional stability at high temperatures. They are good electrical insulators. They do not outgas in vacuum environment. Ceramics are inert materials and resistant to many gases and chemicals. They show high thermal insulating properties or high thermal dissipation. Applications and products Advanced ceramics are used in solid-state lasers (Nd-Yag..), gas lasers, fibre lasers, diode lasers, high-power laser diodes, IPL, as well as in optoelectronic devices - optical optical sensors / imaging, infra-red detectors... Typical customized products from Microcertec are electrical insulators resistant to gas corrosion and plasma discharges, reflectors, heat sinks, 3D metallized sensor carriers, structural parts than can be brazed, sensor holders.

The EP-M260 is an industrial grade metal 3D printer that uses advanced metal powder bed fusion (MPBF) technology. It is capable of easily and quickly converting CAD data into high-performance, complex structure metal parts. The 3D printer is an ideal choice for medium sized parts and small batch production.

Profiles produced "C' Section characterized as CCTR 160. Discover our catalog here

Design and production of metal structures. Total installed capacity of 300 tons per month.

STAIRS COMPOSED OF METAL PROFILES AND ANTI-SLIP SHEET

pavilion in metallic structure coated with sandwich panel

In our new production space, we have at our disposal 30 state-of-the-art automated punching & bending machines. In addition to bent wire parts, we also produce bent strip parts here. Production to order with complex forming: Bent strip parts are produced from a broad range of materials, including for instance stainless steel, alloyed or carbon steel, brass, copper, bronze, or even K55 or K75, a specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

Metal parts, steel grade 5.6. Elastomer, natural rubber, medium hardness, Shore 60. Version: Steel electro zinc-plated. Note: These machine feet have proven themselves to be universally applicable elements for the elastic support of all types of machine. They are commonly used wherever large horizontal movements are to be avoided. The horizontal rigidity is higher in all directions than the vertical rigidity. If used correctly they are excellent at preventing the transfer of vibration and noise. Machine feet with shear protection are available for situations where tensile forces are to be expected. The indicated load data are reference values for static loads by rubber hardness of Shore 60A. In contrast to those in the drawing, the holes D2 can also be elongated holes.

We offer customized die-cast parts, stamped parts, deep-drawn parts, turned parts, milled parts and contact springs, both as small-precision and large parts. Partial or complete plastic and rubber injection molding of metal parts is also part of our portfolio. The manufactured metal parts can be completed with sealing elements, threaded inserts and bearing bushes. We also offer processes for cold pressing, as well as cost-effective surface finishing. We accompany our customers throughout the entire project process and organize the tool and sample production as well as the production (including surface finishing) and optionally also the assembly of the series parts.

RACK CLAD BUILDING SYSTEMS Rack Clad Building Systems eliminates the roof and exterior siding needs of the warehouse and allows you to install a racking system. It eliminates roof and exterior siding needs and allows you to have a construction free racking system. Building construction is not necessa in advance with Rack Clad Building System. Rack Clad Building Systems does not require construction investment, providing a cost advantage from 18% to 30%. Since the use of columns and beams eliminated with the Rack Clad Building Systems, more space gained. Since the Rack Clad Building Systems are in demounted structure, it can easily be mobilized to another place and assembled. Corridor distances in building-free racking systems can be altered depending on type of loading equipment used. In the Rack Clad Building Systems, concrete is applied on the land/ shelves are xed on it, then exterior su ace is constructed by the facade covering (sandwich panel).

Using different CNC turning and milling machines we can manufacture metal parts made from various materials and provide galvanic or other types of coatings.

Ming Xiao Mfg specialize in sheet metal Stamping services more than 20 years,have been customed many kinds of sheet metal stamping parts, puched parts,deep drawn parts for different industries.We providing relavent processes such as punching,bending,cutting,shearing,riveting,spinning,welding,deep drawing,etc. We are also have 6 sets different sizes progressive die stamping machines, can produce small metal stampings with high speed and low prices. suitable to high volume metal stamping components. Metal Stamping Parts Available Materials: Aluminum,copper/ brass,stainless steel, carbon steel, Mild steel,cold roll steel, Kovar steel,etc. CRS (cold rolling steel) sheet, HRS (hot rolling steel) sheet,hot-galvanize steel sheet (SGCC,SPCC,). stainless steel: 201,304,316... Aluminum alloy: 1060,2024, 3003,5052,6061,etc All standard brass and copper Finishs: Anodize,painting,powder coating,blackening,electroplatings of chrome/zinc/nickel /tin/silver...

Ming Xiao Manufacturing Co., Ltd.is professional ISO9001 certificated Metal Parts Parts manufacturer, Located in China Ningbo,Specialize in Services of Sheet Metal Stamping,CNC Turning & Machining,Tube Bending, Cold forging & Hot Forging, and also can provide outsourcing services of laser cutting & Casting. We produce metal parts for various indstries,custom produce a wide variety of machine parts and hardware components according customer’s drawing or sample,such as kinds of machined parts – metal shafts,steel rods, bushings, Sleeves, Flanges, tubes; Metal stamping brackets, frames, clamps, casing, housing; deep drawn components; tube bending components; cold forging parts,studs,bolts,screws,nuts,pins; steel wire forms and all kinds metal components. We provide a wide range of machining services, can satisfy the customer many types of products one-time order, for the customer to save a lot of trouble and costs for buy in different suppliers.

Pressed Metal Parts - please contact us for more information!

Various types of prefabricated and assembled structures. We draw up drawings, cut and drill the material, weld and paint it, and also assemble it on site at the customer's premises.

We are a Polish company with many years of experience in light steel work. We offer services such as: MIG and MAG welding of small and medium steel constructions, hot and cold forging of steel elements, bending pipes and profiles.

KSL - Complex metalworking in Ukraine, Kyiv Our technological capabilities: ☑ Laser cutting of sheet metal size 6000*2000mm and 20mm thickness. ☑ Laser cutting of pipes size 7800 mm, diameter 150 mm and wall thickness 6 mm. ☑ Sheet metal bending. ☑ Metal Welding ☑ Area of powder painting. ☑ Locksmith work. ☑ Engineering and Design Department. ☑ Assembly and packaging of products. ☑ Logistics. Product delivery. We work with various big European companies! You can familiarize yourself with us in more detail: Website: ksl-pro.com or ksl.ua Mail: zakaz@ksl.ua Phone: +38 (050) 011 83 29 #metalworking #lasermetalcutting #lasertubecutting #metalbending #metalwelding #smithwork #powdercoating

In the construction of the industrial facility, steel construction provides the earthquake-resistant, reliable and high-bearing structures that serve robustness, lightness, offers desired height and apertures, allowing you to easily be ready for service in a short time and anywhere in the world by adhering to your project. Industrial Plants Logistics Facilities Administrative Buildings Sport Facilities Shopping Mall Health Facilities Parking Projects Aircraft Hangars Fattening farms Storage Projects

---------

The underground railway, light railway, monorail railway and magnetic levitation railway are road transport means which are composed of train, railway, station and dispatch system (including dispatching equipment and scheduling personnel)

Machine Manufacturing Industry, GGG 50 Cast Material, 3540 Kilograms

Energy Industry, Cable Rolling System, S355J2N Material, 12400 Kilograms

From 2004 we are producing long lasting steel constructions of the great quality providing facilities for metalworking by CNC machines. We are following EN 1090-1,2 standards up to EXC 3 in producing metal constructions by clients order and by our concluded drawings. We are ever-expanding range of services. The team of specialists, ensures the quality of products and performance agility in small serial and serial production. At given need our experts can invoke extensive subcontracting.