Metal surface cleaning - Import export

We provide stainless steel sandblasting and grinding services to obtain smooth and clean metal surfaces. The stainless steel sandblasting procedure is environmentally friendly and highly efficient. For finishing metal surfaces, Profinox provides glass sandblasting services – a procedure that does not contaminate surfaces with iron. This consists in propelling glass granules in the form of a jet at very high speeds directly onto the surface of metal parts. As one of the most important aspects reflecting the quality of a product is the finish of the product itself, our stainless steel sandblasting service enables us to perform highquality surface machining, as sandblasting with glass granules makes it possible to treat even the most difficult to penetrate areas and gives a clean and smooth look to the product. Another important function of stainless steel sandblasting is to significantly improve the final appearance of the product.

GEKO Wire end brush 75mm M14 It is made of high quality dense corrugated steel wire. Perfect for renovation work, cleaning metal surfaces, removing old paint, varnish, rust, burrs, etc. Thread mount: M14 (standard angle grinder) Made of high quality hardened steel wire Steel housing Maximum rotational speed: 12500 rpm

Eco-friendly ester-based cleaner designed to remove bitumen, tar, grease, oil stains. An agent based on vegetable hydrocarbons with additives that make it easier to wash stains from the cleaned surface. CLEAN-BIT ECO is used to remove dirt from metal, steel, chrome, aluminum and painted surfaces. The agent is ideal for cleaning tools and equipment designed to work with heavy hydrocarbon fractions such as asphalt, tar. Does not cause corrosion of cleaned metal surfaces CLEAN-BIT ECO deeply penetrates the surface to be cleaned, reacts with the oil stains dissolving them and at the same time breaking down their structure. •high efficiency of action, •easy to use, •removes even old dried stains, •wide range of action on the type of stains. APPLICATION Apply the product to the stains with a microfiber cloth.Gently wipedirty surface.For heavier dirt, apply the product directly to the surface to be cleaned and wait 5 minutes. Wipe off the stains with a microfiber cloth.

It uses iron phosphate to clean on metal surfaces. It could be produced differents amounts according to demand of customer.

Powder coating of metal is a popular technology that allows you to reliably protect the metal from corrosion while giving the product an attractive appearance. Each powder coating starts with pre-treatment. The surface of the metal is cleaned of rust, dirt and grease by chemical or mechanical means. Next, the product is placed in the paint chamber, where charged paint particles are sprayed over the surface with a paint gun. The products covered with a thin layer of powder are transferred to the furnace. Heating causes the paint to polymerize. As a result, a strong polymer film of the desired shade is formed on the surface.

The Plasmajet® (registered AFS trademark) produces a plasma without a vacuum. The plasma, generated by high voltage in combination with any process gas, is blown out of the unit, and is potential-free. It is used for surface modification. When the plasma comes into contact with a plastic surface, the wettability is increased. Metal surfaces can effectively be cleaned, and it is also possible to weld plastic sheets. The system comprises of a plasma reactor with nozzle, a high-voltage generator with transformer and high-voltage rectifier. The application field for Plasmajet® is mainly where geometric, three-dimensional bodies or profiles are to be coated, printed, glued or cleaned. Typical application examples: Treatment of EPDM profiles for the automotive industry before flocking Treatment of adhesive grooves before gluing the lens of car headlights Treatment of razors and mobile phones before tampon printing Degreasing aluminum profiles before bonding

English | Deutsch | Español | Português | Français | Italiano | Русский Visit our website for information in your language. Laser-Lotion PROTEC LC20A Anti-spatter agent PROTEC LC20A is optimised to protect sheet metal panels, pipes, profiles and equipment (supports). Protects any type of metal surface from spatter (steel, stainless steel, aluminium, etc.) No silicone, non-flammable and biodegradable. Laser-Lotion PROTEC LC20A ensures increased quality by preventing spatter, providing dry and clean metal surfaces, no reworking required, as well as higher productivity of the laser system as the beam moves more easily following penetration. Another customer benefits are reduction of cleaning efforts and longer lifetime for the grating (support bars) of the flatbed laser system. • No residue and a particularly low level of emissions • Process safety, also during follow-up processes (vibratory finishing, welding, etc.) • Suitable for all conventional coating

In our production plant we have a number of machines and equipment for surface treatment. The "before" and "after" effects are visible in the photos.

We provide surface preparation and finishing of casted aluminium parts and other metal parts, such as: shot blasting, sand blasting, deburring (trowal), polishing, anodization, galvanic coatings, powder coating and cataphoresis.

An agent designed to remove bitumen, tar, grease, grease, oil stains. CLEAN-BIT is used to remove stains from metal, steel, chrome, aluminum and painted surfaces. The agent is ideal for cleaning tools and equipment designed to work with heavy hydrocarbon fractions such as asphalt, tar. CLEAN-BIT deeply penetrates the surface to be cleaned, reacts with the oil stains dissolving them and at the same time breaking down their structure •high efficiency of action, •easy to use, •removes even old dried stains, •wide range of action on the type of stains. APPLICATION Apply the product to the stains with a microfiber cloth. Gently wipe the soiled surface. For heavier dirt, apply the product directly to the surface to be cleaned and wait 5 minutes. After this time, wipe off the stains with a microfiber cloth.

At given need our experts can invoke extensive subcontracting. Constructions can be: shot blasted and painted wet; galvanized in various ways;

- Shot blasting; - Sand blasting; - Pickling; - Extensive subcontacting.

English | Deutsch | Español | Português | Français | Italiano | Русский Visit our website for information in your language. Visco-Lotion PROTEC CE15V+ Special formula for protection of jigs and fixtures, limit stops, and brackets from hot metal spatter during welding, with integrated cleaning effect. Due to high viscosity CE15V+ forms a particularly stable protective layer in any position. Ready for application, water-based, without silicone. When using CE15V+ customers benefit from increased productivity through safeguarding of the clamps’, minimization of cleaning time, and longer service life of jigs and fixtures due to reduced mechanical stress during cleaning. Further advantages • Long-lasting protection agent that facilitates cleaning • Tested and approved for cataphoresis • Prevents sensor failures • Tested and proven in the automotive industry • Maximum process safety for users and environment. Accessories: Sprayer HSP4K, drain valve, pressure-Sprayer.

Various Materials and Grains Widths: 3mm to 1600mm Lenghts: from 260mm

In addition to laser cutting, edging and welding, we at W & K Metallverarbeitung also offer various services in the field of post-processing and surface treatment either internally or through reliable external partners. We execute all requirements according to your required factory standard. Would you like a final assembly of your products? This is also possible with us. For coating and surface treatment, we work together with high-performance partners. • Powder coating (maximum component size 1.6 x 3.0 x 8.0m (W / H / L)) Galvanized galvanizing (blue, yellow or black chromating, max. Length of the component 3,000 mm) • Hot dip galvanizing (spin-galvanizing, high-temperature galvanizing, maximum component length 9,000 mm) • KTL coating • rays Which surface do you want? We are happy to help!