Mounting structures - Import export

The use of bifacial panels in combination with specially designed structures can increase energy generation by up to 30%. Variability takes into account factors such as installation height, reflectivity of lower surfaces, shading of adjacent rows and the proportion of diffuse radiation Quick, easy installation, due to light weight and original fasteners that allow you to mount panels from both sides. The high-strength grade of steel reduces the weight of structures, which means a considerable cost cutting of the price and costs of transportation. The structure's resistance to loads meets Eurocode standards. Hot-dip galvanizing of each part in accordance with ISO 1461:2009 provides corrosion resistance for a long period of time. Segmented posts for easier handling.

The advantage of a ground system with orientation to the east and west is that at angles of 10 - 15 ° they are installed closer to each other, eliminating shading and allowing maximum filling of the space on the site. Own engineering solutions allow to accelerate installation, provide durability and resistance to atmospheric phenomena. A specially selected highstrength grade of steel reduces the weight of structures, significantly reduces the price and transportation costs. At the same time, the load resistance of structures meets all European and international standards.

The ground mounting system on concrete supports is suitable for rocky terrain where it is not possible to install pile supports. Mounting on the supporting brackets is considered the most practical and economical for standard ground mounting. Moreover, the base does not have a harmful impact on the environment during its operation. All structures are resistant to loads and comply with all European and international standards. Galvanized coating Z600 extends the life of finished products by protecting the steel against corrosion.

Ground Based Mounting Structures for solar panels Light, quick and easy-to-install system at an optimal price Quick, easy installation, due to light weight and original fasteners that allow you to mount panels from both sides. The high-strength grade of steel reduces the weight of structures, which means a considerable cost cutting of the price and costs of transportation. The structure's resistance to loads meets Eurocode standards. Hot-dip galvanizing of each part in accordance with ISO 1461:2009 provides corrosion resistance for a long period of time. Segmented posts for easier handling.

The FRMD is used to remove the upper layer of foam, oil or fats. The natural flow within the basin, together with the suction of the pump, attracts the surface of the water towards the center of the FRMD. An adaptable floating weir allows the upper layer to enter the pump and be removed from the basin. The weir and the submersible pump are mounted on a robust floating structure held in place by cables and springs or guiding tubes. Depending on the application and the geometry of the basin, the FRMD can be mounted together with a MIX SL (directional submersible mixer) or MIX-AS (floating downdraft mixer) to help the flow towards the weir. Applicable for removal of oil, fats, bulking + aging sludge, recycling of scum in sludge stabilisation + biogas, SBR and ASP tanks.

Mounting Holed Type Super Slim Crossed Roller Bearings CRBTF is a compact and light weight bearings which mounting holes are prepared on both inner and outer ring of Super Slim Type Crossed Roller Bearings with the ultraslim 5mm bearing width to make mounting to equipment easier. Features 1.We achived the ultraslim 5mm bearing width by IKO technology of miniature bearings production, and this bearing contributes to make equipments more compact. 2. Complicated mounting structures are not neccesary thanks to the mounting holes provided to both innner and outer rings which make it possible to mount directly to the mounting surface without a housing or a pressure plate.

FPHK 285-C - DRUMS TILTER FOR FORKLIFTERS The FPHK 285-C tilter has a fork-mounted structure and is suitable for lifting and emptying metal drums from lt. 200 with diameter mm. 580-600. The device is complete with a band for locking the drum, a frontal safety rod and an angular transmission with a handwheel for rotation. The tilter can also lift plastic drums with edges but only of the type that can be seen in the picture.

LF FP800 – TILTER FOR DRUMS SUITABLE FOR FORKLIFT The tilter for drums LF FP800 it has fork mounted structure with elevator cart and is suitable for lifting and emptying 200 liter metal drums with 580-600 mm. diameter. The device is complete with bracket for locking the drum, frontal safety rod and bevel gearbox with handwheel for rotation. More about CE certification The equipment is supplied complete with CE certification and manual of use and maintenance related to the sole subject of the sale. Before using the machine, the customer must check that the elevator cart on which the object will be installed is in compliance with all regulations, including lifting combination and equipment. It is also responsibility of the customer to inform of any special tests that must be performed before use. By purchasing the customer, he/she becomes aware of this information and, where necessary, undertakes to test his/her elevator before using it with the mounted equipment.

MOTORIZED ROTARY TABLE WITH INTEGRATED ELECTRONIC SCALE Motorized rotary table for manual pallet and packs wrapping, mounted on a compact structure in painted steel that can be forklifted with a transpallet. The external electrical panel is equipped with a support stand. The table is fixed on a weighing platform with 4 load cells. Thanks to the integrated scale with weight indicator, it is possible to weigh the pallets or packages in real time before wrapping. TECHNICAL FEATURES WEIGHT INDICATOR 5-key functional waterproof keyboard 25 mm backlit LCD display. with 6 high-contrast digits and icons to indicate active functions IP54 ABS enclosure, easy to clean and resistant in harsh and corrosive environments Suitable for use on table, column or wall Adjustable angle fixing bracket supplied 24 bit A/D converter, 4 channels, max 200 conv./sec. autoselect and up to 8 signal linearization points Max 10,000e or multifield 3 x 3000e at 0.3 µV/d in version

NSPV Weather Protected AC Isolating Switches The IP66 Weatherprotected Isolating Switches is a robust range of switches suitable for virtually any external application. Fixed Earth and Neutral connector bars with dual clamping screws per tunnel provide equal stripping lengths and secureclamping for all cables. Terminal bore size is 5 x 6.6mm. Included in the range are 1,2, 3 and 4 pole switches from 20 to 80 Amps. And the colour include white and grey.The basemounted mechanism provides for easier termination and more wiring room. Switch dimensions are 165mm x 82mm with anoverall height of 85mm. A safety feature for mounting switches to metal structures is the insulating caps that cover base mounting screws to totallyprotect them from any live cables. Dual 25mm screwed conduit entries top and bottom (up to 55 amp.) allows four ways to surface wire the switch. 55 amp.and above are also available with 32mm entries top and bottom.

Aluminum nitride ceramics have excellent electrical and thermal properties, and are considered to be the most promising high thermal conductivity ceramic substrate materials. In order to seal the package structure, mount components and connect input and output terminals, the surface and interior of the aluminum nitride ceramic substrate need to be metallized. The reliability and performance of ceramic surface metallization have an important impact on the application of ceramic substrates, and firm bonding strength and excellent air tightness are the most basic requirements. Considering the heat dissipation of the substrate, it is also required to have high thermal conductivity at the interface between the metal and the ceramic. The metallization methods on the surface of aluminum nitride ceramics include: thin film method, thick film method, high melting point metallization method, electroless plating method, direct copper cladding method (DBC), etc.

The L-20 series is a particularly cost-effective solution that is suitable for a wide range of applications. It has versatile mounting options and a flange drive. Helac’s sliding spline technology with helical teeth is not self-locking and offers both high impact resistance and a high holding torque for demanding applications. It functions both as a rotating device and as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 4,400 Nm at 210 bar.

The L-20 series is a particularly cost-effective solution that is suitable for a wide range of applications. It has versatile mounting options and a flange drive. Helac’s sliding spline technology with helical teeth is not self-locking and offers both high impact resistance and a high holding torque for demanding applications. It functions both as a rotating device and as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 4,400 Nm at 210 bar.

The L-20 series is a particularly cost-effective solution that is suitable for a wide range of applications. It has versatile mounting options and a flange drive. Helac’s sliding spline technology with helical teeth is not self-locking and offers both high impact resistance and a high holding torque for demanding applications. It functions both as a rotating device and as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 4,400 Nm at 210 bar.

The L-10 series has our smallest and most compact hydraulic drive with helical gearing. With its extremely high axial load capacity in a slim, cylindrical design with flange mounting and drive, the ultra-compact L-10 series is ideal for applications with limited space. Helac’s sliding spline hydraulic technology with helical gearing is not self-locking and offers both high impact resistance and high holding torque for demanding applications. The L-10 series functions as a rotating device as well as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 2,825 Nm at 210 bar.

The L-10 series has our smallest and most compact hydraulic drive with helical gearing. With its extremely high axial load capacity in a slim, cylindrical design with flange mounting and drive, the ultra-compact L-10 series is ideal for applications with limited space. Helac’s sliding spline hydraulic technology with helical gearing is not self-locking and offers both high impact resistance and high holding torque for demanding applications. The L-10 series functions as a rotating device as well as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 2,825 Nm at 210 bar.

The L-10 series has our smallest and most compact hydraulic drive with helical gearing. With its extremely high axial load capacity in a slim, cylindrical design with flange mounting and drive, the ultra-compact L-10 series is ideal for applications with limited space. Helac’s sliding spline hydraulic technology with helical gearing is not self-locking and offers both high impact resistance and high holding torque for demanding applications. The L-10 series functions as a rotating device as well as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 2,825 Nm at 210 bar.

The L-10 series has our smallest and most compact hydraulic drive with helical gearing. With its extremely high axial load capacity in a slim, cylindrical design with flange mounting and drive, the ultra-compact L-10 series is ideal for applications with limited space. Helac’s sliding spline hydraulic technology with helical gearing is not self-locking and offers both high impact resistance and high holding torque for demanding applications. The L-10 series functions as a rotating device as well as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 2,825 Nm at 210 bar.

The L-10 series has our smallest and most compact hydraulic drive with helical gearing. With its extremely high axial load capacity in a slim, cylindrical design with flange mounting and drive, the ultra-compact L-10 series is ideal for applications with limited space. Helac’s sliding spline hydraulic technology with helical gearing is not self-locking and offers both high impact resistance and high holding torque for demanding applications. The L-10 series functions as a rotating device as well as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 2,825 Nm at 210 bar.

The L-10 series has our smallest and most compact hydraulic drive with helical gearing. With its extremely high axial load capacity in a slim, cylindrical design with flange mounting and drive, the ultra-compact L-10 series is ideal for applications with limited space. Helac’s sliding spline hydraulic technology with helical gearing is not self-locking and offers both high impact resistance and high holding torque for demanding applications. The L-10 series functions as a rotating device as well as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 2,825 Nm at 210 bar.

The L-10 series has our smallest and most compact hydraulic drive with helical gearing. With its extremely high axial load capacity in a slim, cylindrical design with flange mounting and drive, the ultra-compact L-10 series is ideal for applications with limited space. Helac’s sliding spline hydraulic technology with helical gearing is not self-locking and offers both high impact resistance and high holding torque for demanding applications. The L-10 series functions as a rotating device as well as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 2,825 Nm at 210 bar.

The L-10 series has our smallest and most compact hydraulic drive with helical gearing. With its extremely high axial load capacity in a slim, cylindrical design with flange mounting and drive, the ultra-compact L-10 series is ideal for applications with limited space. Helac’s sliding spline hydraulic technology with helical gearing is not self-locking and offers both high impact resistance and high holding torque for demanding applications. The L-10 series functions as a rotating device as well as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 2,825 Nm at 210 bar.

The L-10 series has our smallest and most compact hydraulic drive with helical gearing. With its extremely high axial load capacity in a slim, cylindrical design with flange mounting and drive, the ultra-compact L-10 series is ideal for applications with limited space. Helac’s sliding spline hydraulic technology with helical gearing is not self-locking and offers both high impact resistance and high holding torque for demanding applications. The L-10 series functions as a rotating device as well as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 2,825 Nm at 210 bar.

The L-10 series has our smallest and most compact hydraulic drive with helical gearing. With its extremely high axial load capacity in a slim, cylindrical design with flange mounting and drive, the ultra-compact L-10 series is ideal for applications with limited space. Helac’s sliding spline hydraulic technology with helical gearing is not self-locking and offers both high impact resistance and high holding torque for demanding applications. The L-10 series functions as a rotating device as well as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 2,825 Nm at 210 bar.

The L-30 series consists of our hydraulic drive with helical gearing for heavy-duty applications; it is particularly suitable for harsh environments. The L-30 series is designed for applications requiring extremely high load capacity and is available with a foot or flange mounting option with flange drive. Helac’s sliding spline technology with helical teeth is not self-locking and offers both high impact resistance and a high holding torque for demanding applications. It functions both as a rotating device and as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in ten standard sizes with an output torque of up to 83,600 Nm at 210 bar.

The T20 series with toothed output shafts and a rotation angle of 200-220 degrees is ideal for applications where torque generation and higher cycle rates are the most important requirements. Helac’s sliding spline technology with helical teeth is not self-locking and offers both high impact resistance and a high holding torque for demanding applications. It functions both as a rotating device and as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in three standard sizes with an output torque of up to 6,780 Nm at 210 bar.

The T20 series with toothed output shafts and a rotation angle of 200-220 degrees is ideal for applications where torque generation and higher cycle rates are the most important requirements. Helac’s sliding spline technology with helical teeth is not self-locking and offers both high impact resistance and a high holding torque for demanding applications. It functions both as a rotating device and as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in three standard sizes with an output torque of up to 6,780 Nm at 210 bar.

The T20 series with toothed output shafts and a rotation angle of 200-220 degrees is ideal for applications where torque generation and higher cycle rates are the most important requirements. Helac’s sliding spline technology with helical teeth is not self-locking and offers both high impact resistance and a high holding torque for demanding applications. It functions both as a rotating device and as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in three standard sizes with an output torque of up to 6,780 Nm at 210 bar.

The T20 series with toothed output shafts and a rotation angle of 200-220 degrees is ideal for applications where torque generation and higher cycle rates are the most important requirements. Helac’s sliding spline technology with helical teeth is not self-locking and offers both high impact resistance and a high holding torque for demanding applications. It functions both as a rotating device and as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in three standard sizes with an output torque of up to 6,780 Nm at 210 bar.