Music schools - Import export

Wavesorba acoustic tiles provide high noise absorption for areas such as high-tech offices, airports, schools, entrance areas, music or television studios and retail stores. Wavesorba s acoustic tiles comprise of high performance acoustic fire-rated foam which is upholstered with a multitude of, soft, soothing colour acoustic fabrics. The fabric is covered on the face and edges and returns approx. 2 inches to the back. Wavesorba sound absorbent tiles are available in 18 different colours. Acoustic Performance The installation time is fast as the Wavesorba panels are suspended by steel wires from the soffitt by means of special spiral hooks which are fitted in the rear of the acoustic panels. The depth in suspension is simply adjusted by adjusting the length of the steel suspension. This also allows the acoustic tiles to be installed at sloping angles if required again adding to the visual design possibilities. The spiral hooks should be placed between 200mm and 300mm from the...

Doorsorba acoustic doors are extremely high performance sound reducing timber doorsets. These high quality doorsets are available in a wide range of finishes and are fire rated. Used in areas which require high sound reduction performance such as theatre, radio/TV studios, music rooms, interview rooms, cinemas, schools and confidential offices. Acoustic Performance Installation DOORSORBA acoustic doorsets are installed in a similar manner as normal timber doors. Doorsets are supplied at a moisture content of 6-12% and should not be brought on site until conditions are suitable. Wet trades should be complete and the building dried out and brought to normal working room temperature. DO NOT build-in or install frames as first-fixings. 1. Check the sizes of the doors, the frames and the openings prior to starting installation. Only skilled tradesmen should undertake installation as correct fitting door/frame is imperative. 2. Frames should be fitted to the supporting construction...

ECHOSORBA stick-on acoustic panels are extremely high performance sound absorption panels. Their lightweight properties and low thickness not only make the panels easy to install but extremely suitable for adhering to a wide range of ceiling and wall surfaces. These sound absorbing panels are used widely in schools, offices, music studios, lecture theatres, multi purpose halls, interview rooms, training areas and cinemas. They meet the requirements of BB93 of the Building Regulations for acoustics in school buildings and are Class 0 fire rated hence meeting the Fire Regulations as well. Acoustic Performance Class A This fixing method results in very high sound absorption especially at low frequencies which is often very difficult to achieve. This product achieves an absorption coefficient of 1.00 (i.e. 100%) even as low as 160 Hz. This provides a very cost effective bass absorber for studios and music rooms at minimal cost. The air gap can be created by using 100mm thick timber...