Ores- ferrous - Import export

Copper ore in various qualities, from South America and Africa write to us - we protect your rights and your money - through our simple but secure trading method - test us! Industrial raw materials

Product Description   Commodity : Dysprosium Ferrum Alloy (DyFe Alloy) Dy 80%(-/+0.1%) RE Purity(TREM):99.9% Min.

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501

WIWOX® 340 is a weakly alkaline cleaning agent for grease, oil and oil carbon soiling. Very suitable for pre-cleaning or basic cleaning of soiled steel, cast iron and non-ferrous metal or plastic parts in an ultrasonic bath or in a spray cleaning system. After cleaning and without water rinsing, the parts are temporarily protected against corrosion. The final drying can be accelerated by blowing off with compressed air, a warm air flow or treatment in a drying cabinet. WIWOX® 340 can be used in a concentration of 5 – 7 %. Dilution with water depends on the degree of contamination and the intended exposure time. The bath should have a temperature of approx. 60° C. The bath should be kept at a constant temperature. In the field of precision mechanics, longer exposure times are possible depending on the degree of contamination.

Touching-up damaged points on galvanised surfaces, for example after welding, drilling or cutting processes Priming of ferrous metals when zinc galvanising cannot be carried out. For example, in vehicle and ship repairs, in steel building construction, civil engineering and bridge building, in tank and overhead line construction, on grids, fence and traffic signal posts, exhaust systems, drain gutters Also suitable for spot welding thanks to the good electrical conductivity Advantages and benefits Highly effective due to active, cathodic corrosion protection Versatile use as durable corrosion protection at thermally stressed metal parts Highly economical due to low consumption and self-cleaning spray valve Supplements galvanising and forms a rough adhesive surface for subsequent painting

The question of the ideal milling cutter is dependent upon the material to be machined. A single-tooth cutter is often an advantage for ""soft"" materials (PVC, Perspex, Kömacel, etc), wooden materials (chip- or flakeboard) and non-ferrous metals (soft aluminium, Alcubond, etc.), as the problem of cutting erosion in comparison to clogging recedes. A double flute is better suited to very hard plastics and harder types of aluminium (short chipping). Milling cutters with 4 or more flutes are predominantly used to mill metals. SINGLE-TOOTH MILLING CUTTERS Single-tooth milling cutters are mainly used for machining ""soft"" materials. Their extra large chipping space guarantees an ideal chipping removal and high stock removal rate. MULTI-TOOTH MILLING CUTTERS Multi-tooth milling cutters are used for machining ""harder"" materials. Smoother running is achieved, as several cutting edges are always in contact. The more flutes the tool has, the smaller the individual chippings will be.

Lubrication of all kind of high stressed sliding areas, especially at low sliding speeds or oscillating movements, e.g. at threads, joints and bayonet nut connectors made of steel or non ferrous metals Assembling paste with corrosion protection for screws, bolts, spikes, bushings, flanges, spindles and fittings in the whole food stuff industry Separation of high temperature stressed screw joints, even after a long operation time Advantages and benefits Adheres good on metal surfaces, has a good water resistance and corrosion protection Good water resistance Prevents from tribo-corrosion Contains no metal pigments and is free of sulphurous materials Neutral to alloyed steels Formulation according to the FDA guideline 21CFR 178.3570 Registered by the NSF H1 MOSH/MOAH-free For optimal adhesion clean thread and sliding areas from dirt and other lubricants, first mechanically (e.g. with wire brush) and then with OKS 2610/OKS 2611 Universal Cleaner. Apply paste evenly in a sufficient amount

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501 NSF H2 registered To achieve optimal adhesion remove soiling as well as other lubricants from the thread and sliding surfaces. Use a brush, spatula or similar to apply sufficient OKS 250

Cut-To-Length Lines are core competence at GSW. They belong to the family of Cutting Lines and are designed to process diverse materials out of steel, non-ferrous metals or aluminum and precisely cut a coil into sections of equal length (which is where the name comes from). Starting with narrow slit strip and finishing somewhere beyond 2000mm width – our Cut-To-Length Lines always know how to shine in this process.

The STS-spiral roller brush range from Kullen-Koti contains all measurements from small to extra large and this unbeatable selection of diameters makes this brush a totally reliable tool for light brushing tasks. Due to the high fill density and precisely ground surface it achieves outstanding results. A flawless radial true runing is a requirement in most cases to achieve the desired brush effect. Therefore the brush cores are electrodynamically pre-balanced and re-balanced according to the required RPM after assembly of the spiral brushes. The balancing quality refers to quality grade G 2.5 as per ISO 1940. As core material we have available: mild steel, stainless steel, non-ferrous metal or plastic coated steel. Fixing of the spiral coils The coils are generally mounted onto the roller cores with pressure rings (PRB) in order to prevent the brush from roating on the core. Depending on the work and the rotation speed of the brush the coils can also be spot-welded or screwed...

A further variation of the "Throw-Away" system is type 230. It consists of continuously wound DBS-spiral brushes fitted to a thin walled steel, stainless steel or non-ferrous metal tubular shaft. The face width corresponds to the required total brush legth (BLG). The complete "Throw-Away" brushes can be simply assembled onto the customer's existing shaft. This method avoids the costly return of the complete shafts when the brushes have to be replaced. Core systems The complete "Throw-away" brushes type 230 can be supplied with adaptors to reduce the core inside diameter (KD) i. e. brushes with or without collar with suitable arbor holes (AL) for the different core systems WK1 and WK2. Our roller brushes are supplied with a fill surface perfectly trimmed and/or ground for concentricity. The brushes with adaptor or bushes are electro-dynamically balanced at the intended rotation speed according to standard G 2.5 as per ISO 1940

The types 220 & 221 are extremly flexible in their dimension and depending on the required performance these endless spiral brush coils are mounted on core systems made of mild steel, stainless steel or non ferrous metals.Compared with other brush designs we can reach the highest possible fill density with these types and they can be applied with a maximum speed of 55 m/sec without any problems. Supposition for it, is that the roller brush cores are electrodynamically balanced after the mounting of the core according to the required rotation speed and quality G 2.5 which comes up to ISO 1940. Our roller brushes are supplied with a fill surface perfectly trimmed and/or ground for concentricity. A perfectly seated attachment of the coils on the roller core is guaranteed by the pressure or mounting ring (PRB) system, also available with removable balancing weights (PRB-AW), which prevents the brush coil from rotating on the core. In some circumstances you also could choose a...

Aluminium, Steel, Stainless Steel or Non Ferrous holders are available to suit any application. Most are available in either 45, 90 or 180 degrees and are also available as inserts to slide into the bottom of doors. The maximum length available is 3mtrs but we are able to cut, profile and champher your holder to any pattern provided by yourselves. Hard wood holders are also available.

Our WEDM Filters can be used for metals like steel, aluminum, stainless steel, copper or any other ferrous or non-ferrous metals. Tel Erozyon Filtreleri-Ana Görsel-min Besides WEDM Brochure, you can download the product catalogue and the other brochures on the left panel in order to see our wide variety of products.

The steel industry is a specific sub-sector of the stationary industry. The term steelmaking refers to a specific area of metallurgy that involves the technique of processing iron-rich ore to produce iron or various types of ferrous alloys, including steel, pig iron and alloy steels. The steel industry needs very reliable and robust equipment: no malfunction is allowed. Rolling mills and furnaces must not be stopped by a defective hydraulic cylinder. The main features of the cylinders used in this sector, apart from ensuring high reliability, are that they are designed to operate in dusty environments and at very high ambient temperatures, even above 100°C. This makes it necessary to equip the cylinders with seals that retain their functionality even at such high temperatures. Seals and gaskets made of special fluorocarbonate material (Viton) are used. HIDROMEC develops hydraulic cylinders and systems for applications in the steel industry that are reliable, durable and comply with the relevant environmental standards.

EXCOR PERIGOL 100 is suitable for corrosion protection of ferrous metals, uncoated or partially galvanised steel, cast iron and other metals. PERIGOL 100 may be applied using immersion or spraying techniques. EXCOR PERIGOL 100 corrosion protective oil only requires a brief drip-off time and when applied can resist temperatures of up to approximately 50º Celsius. Solvent-free PERIGOL 100 forms an oily, non-wipeproof film on the metal surfaces which may be removed using aqueous alkaline media.

EXCOR PERIGOL DW is an anti-corrosion oil containing solvent which is chiefly used for the corrosion protection of ferrous metals, uncoated or partially galvanised steel, cast iron and other metals. It offers excellent water-repellent properties. In metal parts produced by processes involving water EXCOR PERIGOL DW removes the water, which dissolved corrosion-inducing salts may also contain, from the surface, creating a wipeproof film which protects against corrosion. This property can also be useful for dry parts, for instance during spraying. A wipeproof film provides more robust protection against mechanical and thermal stresses and also enhances the corrosion protection it provides.

Flexible in nature and application, supamag® magnetic tape is used across many industries for mounting material or items directly to steel or other ferrous surfaces. Where a ferrous surface is not present, supamag® magnetic tape can be used in conjunction with our adhesive-backed steel tape to provide a surface to which the magnetic tape will grip. Typical applications include magnetically mounting printed media or signage that can be changed quickly and easily. We can bond a range of adhesives to the non-magnetic face of the tape to suit the intended application. For more information please visit the adhesives page. All of our supamag® magnetic tape is UV coated on the magnetic face as standard, preventing the tape from marking the media or product to which it is applied as well as the individual handling the tape. This is especially useful to the print industry where it reduces the need to reprint due to printed media becoming marked and unusable.

InFocus: Precise, reliable und reproducible InFocus is a high-performing TIG technology. Its precision and reliability make the InFocus welding process particularly suitable for automated applications in combination with linear axles, robots and other guiding systems. Nearly all steels, non-ferrous metals or galvanized sheets can be welded in one layer with or without filler material; e.g. CrNi-steels with a material thickness of up to 10 mm. For welding root layers of thicker sheets, the InFocus welding process offers an alternative. By using the TIG keyhole welding process, the web can be made bigger. This reduces the seam cross section and thus the number of the required layers during the subsequent submerged-arc welding. It is also not necessary to gouge the root when using the InFocus welding process for the root layer.

The testing machine series inspekt table was developed for standard-compliant materials and component testing in the medium load range, with particular attention paid to reliability and flexibility. It is ideally suited for materials testing of plastics or non-ferrous metals as well as for testing smaller components, for example from instrument engineering. In combination with our user-friendly testing software LabMaster, standard-based and customer-specific tests can be easily implemented. Testing machine, testing software and our extensive range of accessories such as specimen grips and testing tools, extensometers or temperature control devices are optimally matched to each other and offer the ideal testing system for a wide variety of testing applications (tensile tests, compression tests, bending tests, peel tests,...). Inspekt table is available in six different load levels from 5 kN to 250 kN.

We manufacture punched parts made of aluminum, stainless steel or plastic according to your specifications using high-quality punching tools on our modern punching machines. We can mill or laser smaller quantities or sample parts made of plastic or non-ferrous metals on our CNC machining center or our CO2 laser systems and label them as required.

Highly Advanced, Extremely Accurate, and Comprehensive Gauging System for the Market ODEX® 10 (pat. pend.) is a novel concept from ZUMBACH for very accurate and reliable monitoring of insulation diameter and conductor eccentricity/concentricity during extrusion or other insulating processes of ferrous and non-ferrous conductors. ZUMBACH's extensive experience with thousands of ODAC® laser diameter sensors led to this most advanced system. The ODEX® measures eccentricity, diameter and ovality within a few microns (1μm = 0.001mm [.00004in.]). In applications of modern data cables CAT 5...8 and many other cable products, this often decides if the product passes or fails Quality Control Requirements. Because of the outstanding linearity, the ODEX® can be mounted stationary in most applications and without the need of a servo or mechanical tracking system to keep the product centred.

SINC Razzoor Series cable granulator is advanced-level cable and electronic waste recycling machine, with the compact design the machine becomes mobile, it can be easy moved to other locations and works like plug and play machine. The machine is equipped with all needed to work independent, just supply the electricity and you can start to recycle your cable or electro waste, for to separate the coper, metals, lead or other ferrous or nonferrous metals from the plastics.

Mini Razzor 150 cable granulator is advanced-level cable and electronic waste recycling machine. With the compact design the machine becomes mobile, it can be easy moved to other locations and works like plug and play machine. The machine is equipped with all needed to work independent. Just supply the electricity and you can start to recycle your cable or electro waste for to separate the coper, metals, lead or other ferrous or nonferrous metals from the plastics.