Panel formwork - Import export

The three-layer bonding guarantees high measurement accuracy. Each of the three layers, both the longitudinal outer layers and the diagonal inner layer, is waterproof. They are covered with a special coating of melamine resin, which prevents concrete from sticking and makes them easy to clean, and with paint, which provides protection against harsh weather conditions. Thanks to the sanded surface, the concrete structure is perfectly smooth after formwork. Pfeifer formwork panels are available in both wrought with front edge protection and unwrought versions.

The Modular/GE Universal Formwork has really earned its name, because this system is used all over the world on many different building sites where it demonstrates its versatility, adaptability and flexibility, for foundations, walls, shafts, round walls, columns or beams. The degree of difficulty of the structures to be build can vary considerably, because the balanced range of panels means that the formwork can be adjusted ideally to all layouts and cross sections. The size of the structures to be build does not matter: small surfaces are not a problem for the Modular panels. And as far as large sizes are concerned, preassembled Modular panels can stay together as units or are supplemented by larger GE panels, with unlimited compatibility.

PASCHAL Dam bracket is used wherever single-sided climbing is required, for example for reservoir dams, port and harbour constructions, lock-up constructions in inner city projects and refurbishment measures. The formwork panels can be tilted in fully variable positions on the dam brackets in both directions, allowing for ideal adjustment to the full range of wall slopes and wall abutments. All working platforms remain horizontal while the formwork is tilted.

"#quick and simple installation done by 1 person only within less than one minute, #one pieced anchor - no additional couplers or 45° - holders requested #no removing protruding tie rods - a minimum of refinishing only #installation into meshes more than 70 mm without any problem #no opening and welding reinforcements subsequently #position can be treated by a finishing trowel or a screed board and #recognized again reanchoring out of walls - installation in wall formwork - no more drilling through formwork panels!"

"#quick and simple installation done by 1 person only within less than one minute, #one pieced anchor - no additional couplers or 45° - holders requested #no removing protruding tie rods - a minimum of refinishing only #installation into meshes more than 70 mm without any problem #no opening and welding reinforcements subsequently #position can be treated by a finishing trowel or a screed board and #recognized again reanchoring out of walls - installation in wall formwork - no more drilling through formwork panels!"

Banche de Coffrage alumium manuportable KBC-Diffusion vous propose un coffrage léger innovant dont les performances et le faible nombre de pièces vont vous permettre d'optimiser les coûts et la dûrée de vos chantiers. Les systèmes de coffrage lourd sont des outils performants qui répondent à un cahier des charges des plus complexes, aussi bien en termes de productivité qu'en terme de sécurité. KBC-Diffusion a souhaité vous apporter un outil de coffrage manuportable léger aussi performant et sécuritaire que les banches lourdes que vous utilisez traditionnellement.

This pack consists of -20 x painted steel modular formwork panels 3m x 1m - 40 × GP10 single or variable alignment flanges - 33 × Tightening rod 750 cmm DW15 + 2 nuts DW15 - 2 × GP10 lifting hooks - 5 × GP10 double push pull prop - 5 × Service consoles with blockers - 1 x Inside angle H: 3m, 0.30x0.30 m - 1x of modular painted steel formwork 0.60 x 3m - 1 x painted steel modular formwork panel 0.50 x 3m - 2 × Compensation 3000x100 mm - 2 × Compensation 3000x50 mm - 3 × Variable angle flanges GP10 - 8 × Variable alignment flanges GP10 - 1 x Accessory box 120x80

10 x modular painted steel formwork panels 3m x 2m 20 × Single or variable GP10 alignment flanges 20 × Tightening rod 750 cmm DW15 + 2 nuts DW15 2 × GP10 lifting hooks 5 × Double push pull props GP10 5 × Service consoles with blockers 1 x Inside angle H: 3m, 0.30x0.30 m 1 x painted steel modular formwork panel 0.60 x 3m 1 x painted steel modular formwork panel 0.50 x 3m 2 × Compensation 3000 x 100 mm 2 × Compensation 3000 x 50 mm 3 × Variable angle flanges GP10 8 × GP10 Variable Alignment Flanges 1 x Accessory box 120x80

This pack consists of - 20 x modular painted steel formwork panels 3m x 1m - 40 × GP10 single or variable alignment flange - 33 × Tightening rod 750 cmm DW15 + 2 nuts DW15 - 2 × GP10 lifting hooks - 5 × GP10 double push pull prop - 5 × Service consoles with blockers

This pack consists of 20 x painted aluminum manual formwork panels 3m x 1m 40 × GP10 single or variable alignment flange 33 × Tightening rod 750 cmm DW15 + 2 nuts DW15 2 × GP10 lifting hooks 5 × Double push pull props GP10 5 × Blocker consoles

KBC Diffusion, specialist in the sale of formwork, offers you the SATECO formwork panel range in New but also in used products.

KBC, specialist in the sale of modular formwork, and manual formwork, can renovate your formwork panels. We can renovate your Jean Four eurobress formwork, your PERRI formwork, your DOKA formwork, your DEKO formwork, your COFFERCO formwork and all brands of formwork.

9 × Kit of trusses + support + connection 9 × STEEL formwork panel GP10 3m x 1m 8 × GP10 single or variable alignment flanges 2 × GP10 lifting hooks 4 × Service consoles with blockers 2 × Compensation 3000 x 50 mm 3 x painted steel modular formwork panel 0.50 x 3m 1 x Accessory boxes 120 x 80

This Pack consists of 40 x painted steel modular formwork panels 1.50 m x 1.00 m 4 x painted steel modular formwork panel 0.60 x 1.5 m 4 x painted steel modular formwork panel 0.60 x 1.5m 8 x painted steel modular formwork panel 0.40 x 1.5 m 8 × Offset 150 x 10 cm 8 × Offset 150 x 5 cm 2 × GP10 lifting hooks 4 x Inside angle H: 1.5m, 0.30x0.30 m 60 × Tightening rod 750 cmm DW15 + 2 nuts DW15 112 × Single GP10 Alignment Flanges 8 × Variable angle flanges GP10 16 × GP10 Variable Alignment Flanges 2 x 120x80 accessory boxes

The KBD Diffusion team listens to its customers and has experience in recommending building equipment and offers you custom-made metal plates. 20 mm thick, they are sized to the size of your formwork panels, whatever their brand: SATECO, OUTINORD, HUSSOR, COSMOS, DEKO ... They are equipped with tightening nuts corresponding to the dimension of your rods. Thanks to their lifting ances, they are easy to crane and move. They can be delivered with an alignment angle fixed to the side of the sheet of your choice to facilitate their alignment. These sheets allow you to quickly cast your expansion joints without wasting cardboard and polystyrene. They make it possible to gain flexibility while maintaining high pouring rates. In addition, thanks to these expansion joint sheets, you can use the concrete of your choice and the pouring technique that best suits your site.

-20 x modular painted aluminum manual formwork panels 3m x 1m - 40 × GP10 single or variable alignment flanges - 33 × Tightening rod 750 cmm DW15 + 2 nuts DW15 - 2 × GP10 lifting hooks - 5 × GP10 double push pull prop - 5 × Service consoles with blockers - 1 x Inside angle H: 3m, 0.30x0.30 m - 1x manual painted aluminum modular formwork panel 0.60 x 3m - 1 x painted aluminum modular panel 0.50 x 3m - 2 × Compensation 3000x100 mm - 2 × Compensation 3000x50 mm - 3 × Variable angle flanges GP10 - 8 × Variable alignment flanges GP10 - 1 x Accessory box 120x80

Frame modular formwork MSK is light panel formwork, main element has the following dimensions 100 cm x 150 cm. Mounting element height is 7.5 cm. Bearing structure is a rack screen of strip iron with dimensions of separate cells of 25 x 25 cm. 11-layered plywood board 15 mm thick covered with laminated film is inserted into the structure of steel frames. • Foundation formwork • Wall formwork • Lift well formwork • Wall formwork (compound node points) • Column formwork • Bent surface formwork Modular formwork MSK has ideal gradation of all height ranges, from foundation to necessary wall heights. Base element width is 100 cm. Due to great width range of finishing (fitting) elements, for example 75, 60, 50, 45, 40, 35, 30 and 25 cm and presence of compensating element of 5 cm, formwork can be adapted to any monolith project. At construction sites where there is no crane formwork installation can be executed manually due to light weight of elements.

Our WBP shuttering plywood is designed to be highly resistant to water and moisture, using either phenolic or T1 melamine resin. This makes it highly resistant to water, preventing it from delaminating or warping when exposed to moisture. It is suitable for a variety of applications where exposure to moisture is a concern, including construction, outdoor use, and marine applications. We produce using Radiata Pine for its relatively straight grain, making it easy to cut, shape, and work with. This can save time and labor during formwork installation. While not as strong as hardwoods, radiata pine still possesses adequate strength and durability for most formwork applications. It can withstand the pressure of poured concrete without deforming or breaking. We are also able to produce the shuttering plywood using eucalyptus for higher density and better workload. We can customize to meet your requirement with length of up to 12 feet long. Call us for more information today.

EVODECK this system is suitable for all types of ceiling such as: solid concrete, floor slab (paneled surfaces), mixed floor (concrete and masonry) and lightweight slabs. The drop head permits early stripping already after 2 to 5 days and most of the formwork equipment can be reused right away in the next concrete operation.

The lightweight framed formwork Varieco by Variant is a complete system including accessories, which delivers perfect forming performance on construction sites without use of a crane. Sufficient load-bearing capacity and long service life of the Varieco system makes it an cost-effective solution. Sufficient load-bearing capacity: 60 kN/m² pressure of fresh concrete up to 3.00 m; 40 kN/m² pressure of fresh concrete up to 4.50 m; Can be vertically stacked up to 4.50 m with use of one joint; High quality film faced plywood with thickness of 15 mm. Film weight 240 g/m². Cost-effective: Manhandled formwork panels minimize use of a crane; High number of use cycles means lower follow-up expenses; Reduction of expenses by means of restoration and cleaning possibilities; Galvanized or powder-coated steel frames, for long service life; High quality of concrete surface minimizes finishing work.

Frame formwork Varimax by «Variant» Factory Ltd. is a complete system that includes accessories ensuring operation and safety and offering the opportunity to meet any challenges promptly and efficiently. VARIMAX System is suitable to incase: Big-and small-sized walls; Foundations; Columns and pillars. Due to reinforced profiles used for manufacture of Varimax frame formwork panels both along edges and inside panel the high load-carrying capacity of the following elements is guaranteed: Frame panels 80 kN/m2; Versatile panels 80 kN/m2. Distinguishing the Varimax frame formwork from the products of other similar systems manufactures. The specially developed profile of elements is not only more load resistant in the process of concreting but also makes the replacement of formwork plywood at the end of its useful life substantially easier as compared with elements of other manufacturers. Flat sheets requiring no special cutouts for anchor holes are used.